Description
The CarBahn Performance 313 HP Stage 1 Performance Controller is a plug-and-play ECU tuning solution designed for the BMW M235i and BMW X2 M35i equipped with the B48E engine. The CarBahn Performance Controller (CPC) increases turbocharger boost pressure to deliver additional horsepower and torque while allowing the driver to select different performance maps based on fuel octane.
The controller supports selectable 91, 93, and 100 octane maps through a Bluetooth-enabled smartphone application. This allows the calibration to be adjusted for different fuel types and performance requirements without requiring a traditional ECU flash.
On 93-octane fuel, the Stage 1 controller produces up to 297 HP and 378 lb-ft of torque, while 100-octane fuel allows up to 313 HP and 409 lb-ft of torque.
The system is ready to install and has an estimated installation time of approximately 2 hours.
Performance Specifications
93 Octane
| Specification | Calculated Flywheel Power | Measured Wheel Power |
|---|---|---|
| OEM Stock | 278 HP / 349 TQ | 228 WHP / 286 WTQ |
| Tuned | 297 HP / 378 TQ | 242 WHP / 310 WTQ |
| Delta | +19 HP / +29 TQ | +14 WHP / +24 WTQ |
100 Octane
| Specification | Calculated Flywheel Power | Measured Wheel Power |
|---|---|---|
| OEM Stock | 278 HP / 349 TQ | 228 WHP / 286 WTQ |
| Tuned | 313 HP / 409 TQ | 257 WHP / 336 WTQ |
| Delta | +35 HP / +60 TQ | +29 WHP / +50 WTQ |
CarBahn Performance Controller (CPC)
The CarBahn Performance Controller is a plug-and-play ECU device designed for turbocharged vehicles. It increases boost pressure to increase horsepower and torque while providing selectable maps through a Bluetooth smartphone application.
The CPC supports:
- 91-octane map
- 93-octane map
- 100-octane map
- Bluetooth smartphone control
- Plug-and-play ECU installation
- Adjustable performance maps for different fuel octane levels
An optional powertrain warranty is available with the CarBahn Performance Controller.
If the controller is upgraded to CarBahn software in the future, a $250 upgrade fee applies. If the optional warranty was purchased with the controller, the warranty can be transferred to the software at no additional charge.
Emissions Legality
CarBahn notes that removing the catalytic converter with a downpipe provides a relatively small performance gain, typically around 11 HP, based on back-to-back dyno testing. Catalyst removal can make it difficult to pass required emissions testing and is illegal in certain applications and jurisdictions.
About Steve Dinan
Steve Dinan has more than 40 years of experience tuning street cars. As an engine supplier, his racing programs achieved three prototype racing championships and two overall victories at the 24 Hours of Daytona in partnership with Chip Ganassi Racing.
Detailed Fitment
- Make: BMW
- Model(s): M235i and X2 M35i
- Vehicle Year(s): 2020, 2021, 2022, and 2023
- Chassis: F44 and F39
- Body Style(s): Gran Coupe and SAV
- Engine: B48E
- Measured Flywheel Horsepower: 313 HP
- Part Number: CBPRC-0065
- Installation: Ready to Install
- Installation Time: 2 hours
- Type: Tuning & Software
- Vendor: CarBahn
Warranty Information
Registration with CarBahn Autoworks at the time of purchase is required to maintain matching warranty coverage. CarBahn Autoworks reserves the right to deny warranty program enrollment under certain conditions.
The warranty is valid on U.S. and Canadian specification vehicles only.
If the vehicle is currently covered by the vehicle manufacturer's new car limited warranty, CarBahn Autoworks products are warranted for the remaining term of the manufacturer's new car limited warranty. The manufacturer's new car warranty is limited to 4 years or 50,000 miles, or 80,000 kilometers in Canada, beginning on the date of first retail sale or the date the vehicle is first placed into service as a demonstrator or company vehicle, whichever occurs earlier.
CarBahn Autoworks warranties are transferable when ownership of the vehicle in which the CarBahn Autoworks products were originally installed is transferred.
Under the warranty, CarBahn Autoworks will, without charge for parts or labor, repair or replace defective CarBahn Autoworks components and any original vehicle manufacturer components that may have been directly affected by a CarBahn Autoworks component. New or authorized remanufactured parts may be used. The decision to repair or replace parts is at the sole discretion of CarBahn Autoworks.
Parts replaced under this limited warranty become the property of CarBahn Autoworks. A reasonable period must be allowed for warranty repairs to be completed.
If the vehicle is outside the manufacturer's new car limited warranty, CarBahn Autoworks will, for two years from the original purchase date, repair or replace, at its sole discretion, any defective CarBahn Autoworks component. This portion of the warranty does not include reimbursement for repairs to original vehicle manufacturer components that may have been affected by a CarBahn Autoworks component.
Warranty Exclusions
The warranty does not cover:
- Return shipping charges
- Towing charges
- Rental car fees
- Damage caused by installing replacement parts with specifications materially different from the original vehicle manufacturer or CarBahn Autoworks parts
- Damage resulting from unauthorized modification of a CarBahn Autoworks part or assembly
- Damage resulting from using other manufacturers' products together with CarBahn Autoworks products or systems
- Clutch damage caused by power shifting or abuse
- Brake rotor warping
- Friction materials
- Maintenance services and maintenance replacement parts such as spark plugs, lubricants, fluids, engine tune-up parts, filters, coolant, and refrigerant
- Mechanical adjustments or repairs resulting from normal wear and tear
- Drive belts
- Light bulbs
- Damage resulting from failure to perform required maintenance at specified intervals or according to the original vehicle manufacturer's or CarBahn Autoworks' instructions
- Damage caused by negligence or abuse
- Improper installation
- Improper treatment or treatment contrary to the original vehicle manufacturer's or CarBahn Autoworks' instructions
- Engine damage resulting from alteration of CarBahn Autoworks' original boost pressure
- Damage caused by improper or contaminated fuel
- Damage caused by corrosion resulting from weak or improper coolant
- Damage to CarBahn Autoworks components resulting from collisions or improper collision repairs
- Vehicles operated in competitive events or subjected to aggressive track conditions
- Custom-designed competition parts
- Damages resulting from loss of time, inconvenience, or loss of vehicle use
- Damage resulting from environmental influences, flooding, accidents, fire, or road salt corrosion
- Remanufactured or refurbished products or components, except where specifically identified and covered for the warranty period stated for that product