Description
The Verus Engineering Morizo Brake Cooling Kit is designed specifically for the Toyota GR Corolla Morizo Edition, providing a direct and efficient way to increase brake cooling capacity and maximize the performance potential of the factory braking system.
The Morizo Edition GR Corolla is a purpose-built performance hatchback developed with input from Toyota's GR Master Driver and former Toyota President Akio Toyoda. With its high power-to-weight ratio, rigid chassis, and performance-focused components, the Morizo Edition is built for demanding driving. Verus Engineering takes the factory brake cooling system a step further with an OEM-style brake ducting solution designed to deliver high-pressure airflow directly to the center of each brake rotor.
The system uses a 3D-printed carbon nylon fender transition duct that bolts directly to the factory fender liner. This allows high-pressure air from the factory front inlet ducting to travel through a short, efficient route directly to the rotor, maximizing cooling efficiency while maintaining proper wheel clearance.
The kit includes all the necessary components for installation, including pre-cut high-temperature silicone hoses, stainless steel backing plates and ducts, fender transition ducts, hose clamps, and installation hardware.
Using in-house scan data, Verus Engineering developed the components for an OEM-style fit and finish. Installation is straightforward and can be completed with common hand tools, making this brake cooling upgrade suitable for DIY enthusiasts and track-focused drivers alike.
The Verus Engineering Morizo Brake Cooling Kit is ideal for owners looking to reduce brake temperatures, improve braking consistency, and increase the performance potential of the GR Corolla Morizo Edition during spirited street driving and track use.
Important: Verus Engineering recommends replacing the axle nuts during installation. OEM axle nuts can be added when ordering.
Key Features
- Direct Rotor Cooling: Channels high-pressure air directly into the center of the brake rotor for improved cooling efficiency.
- OEM-Style Design: Developed using in-house scan data for precise fitment and factory-like integration.
- 316L Stainless Steel Ducting: 3D-printed stainless steel backing plate ducts provide excellent durability and corrosion resistance.
- Carbon Nylon Fender Ducts: 3D-printed carbon nylon transition ducts provide strength, durability, and proper wheel clearance.
- Short Airflow Routing: Designed with the shortest practical routing to maximize brake cooling efficiency.
- High-Pressure Air Source: Captures airflow from the high-pressure zone within the front bumper and directs it toward the brakes.
- Morizo-Specific Design: Developed specifically for the Toyota GR Corolla Morizo Edition.
- Pre-Cut Silicone Hoses: High-temperature 2.5-inch silicone brake duct hoses are supplied cut to size for a precise installation.
- Improved Brake Performance: Increased cooling capacity helps maintain more consistent braking performance during demanding driving.
- DIY-Friendly Installation: Installs in a few hours using common hand tools and basic mechanical knowledge.
- Complete Installation Kit: Includes the necessary ducts, hoses, clamps, backing plates, and hardware for installation.
What's Included
- (2) Backing Plate Assemblies with 3D-Printed 316L Stainless Steel Ducts
- (2) 3D-Printed Carbon Nylon Fender Transition Ducts
- (2) 2.5-inch High-Temperature Silicone Hoses, Cut to Size
- (4) 2.5-inch Stainless Steel Hose Clamps
- (1) Hardware Kit with All Necessary Installation Hardware
Specifications
- Stainless Steel Backing Plates: Complete with 3D-printed 316L stainless steel transition ducts for durability and corrosion resistance.
- Brake Cooling Fender Transition Ducts: Designed and printed in-house using carbon nylon for strength, durability, and proper fitment.
- High-Temperature Silicone Brake Duct Hoses: Pre-cut for a precise fit and streamlined installation.
- Installation Hardware: Includes all necessary hardware and stainless steel hose clamps for a complete installation.
How It Works
The Morizo Edition GR Corolla uses high-pressure airflow entering through the front bumper to help cool the brakes. The Verus Engineering brake cooling kit captures this airflow and directs it through the carbon nylon fender transition ducts and high-temperature silicone hoses toward the center of the brake rotor.
The stainless steel duct and backing plate assembly are engineered to direct airflow into the rotor's center, helping increase cooling capacity throughout the braking system. The carbon nylon transition ducts maintain appropriate wheel clearance while providing an efficient connection between the factory inlet and brake ducting.
By increasing the amount of fresh air reaching the brake rotor, the system helps reduce brake temperatures and maintain more consistent braking performance during repeated hard braking. This can contribute to improved braking consistency, reduced lap times, and greater confidence during track driving.
Fitment
Toyota GR Corolla Morizo Edition
Installation
The Verus Engineering Morizo Brake Cooling Kit is designed for a straightforward installation using common hand tools. The system utilizes factory mounting locations and includes pre-cut hoses and the necessary installation hardware to simplify the process.
Recommended: Replace the axle nuts during installation. OEM axle nuts are available as an optional addition when ordering.
