Description
The Verus Engineering Full Brake Cooling Kit is designed to maximize brake cooling efficiency on the Toyota GR Corolla by delivering a direct path for high-pressure air to the center of the brake rotor. Built with an OEM-style approach and optimized for the shortest possible routing, this system helps provide more consistent brake performance during aggressive street driving and track use.
The kit uses 3D-printed carbon nylon inlet ducts that bolt directly to the factory bumper to capture fresh, high-pressure airflow. From there, pre-cut high-temperature silicone hoses route the air to stainless steel backing plates equipped with dedicated ducts that direct airflow directly into the center of the rotor.
Using in-house scan data during development, Verus Engineering designed the components for a near-OEM fit and finish while maintaining the necessary clearance around the wheel and braking components. The result is a functional brake cooling system that can be installed with common hand tools and without extensive fabrication.
By increasing the amount of cool air directed toward the center of the rotor, the Full Brake Cooling Kit helps improve brake cooling capacity, promote more consistent braking performance, and increase the braking system's ability to withstand repeated hard use.
Note: Verus Engineering highly recommends replacing the axle nuts during installation. OEM axle nuts can be added separately where available.
WHAT IS INCLUDED
- (2) 316L Stainless Steel Brake Cooling Backing Plates with 3D-Printed Stainless Steel Ducts
- (2) 2.5-Inch Pre-Cut High-Temperature Silicone Brake Hoses
- (4) 2.5-Inch Stainless Steel Hose Clamps
- (2) 3D-Printed Carbon Nylon Inlet Ducts
- Hardware Kit with All Necessary Installation Hardware
FEATURES & BENEFITS
- Direct Rotor Cooling: Routes high-pressure airflow directly to the center of the brake rotor for improved cooling efficiency.
- High-Pressure Air Capture: Utilizes airflow from the high-pressure zone within the front bumper to maximize available cooling air.
- Enhanced Brake Consistency: Helps reduce heat buildup and maintain more consistent braking performance during repeated hard use.
- OEM-Style Installation: Designed around factory mounting locations for a clean, integrated installation.
- Short Airflow Routing: Optimized routing minimizes unnecessary bends and maximizes cooling efficiency.
- Durable Construction: Combines stainless steel, carbon nylon, dry carbon, and high-temperature silicone components for demanding driving conditions.
- Near-OEM Fit & Finish: Developed using in-house scan data for precise component integration.
- DIY-Friendly Installation: Installs with common hand tools and does not require extensive fabrication.
- Complete Kit: Includes the inlet ducts, backing plates, hoses, clamps, and required installation hardware.
SPECIFICATIONS
- Brake Cooling Backing Plates: Stainless steel construction with integrated 316L stainless steel ducts.
- Air Ducting: Dry carbon air ducting and 3D-printed carbon nylon inlet ducts.
- Brake Duct Hoses: 2.5-inch pre-cut high-temperature silicone hose.
- Hardware: Stainless steel hose clamps and all necessary installation hardware included.
- Manufacturing: Made in the U.S.A.
SCIENCE & PERFORMANCE
The Verus Engineering Full Brake Cooling Kit captures high-pressure airflow from the front bumper and redirects it toward the center of the brake rotor. Delivering cool air directly to this area increases the cooling capacity of the braking system and helps manage temperatures during repeated braking events.
The carbon nylon inlet ducts are designed to maintain proper wheel clearance while efficiently routing airflow through the high-temperature silicone brake hoses. The stainless steel backing plates and integrated ducts further direct airflow into the center of the rotor for improved cooling performance.
By increasing brake cooling capacity, the system is designed to support higher and more consistent braking performance, reduce heat-related performance degradation, and improve the overall driving experience during demanding street and track use.
FITMENT
Toyota GR Corolla
Designed specifically for the Toyota GR Corolla and engineered around the factory braking and bumper configuration.
