Description
The Verus Engineering Dive Plane (Canard) Kit for the Subaru WRX/STI VA adds front-end downforce without requiring the front splitter to be moved farther forward. Designed using internal vehicle scan data and advanced aerodynamic analysis, these dive planes provide a functional aerodynamic upgrade while maintaining an OEM-like fit and finish.
Verus Engineering utilized state-of-the-art aerodynamic analysis software during development to maximize performance within the available build volume. The resulting design increases front-end downforce and helps improve aerodynamic balance at speed.
The dive planes are available in single or dual configurations, allowing enthusiasts to fine-tune the amount of front-end aerodynamic load. A single unit provides a smaller increase in front-end downforce, while the dual configuration provides a larger aerodynamic effect.
The kit can be installed using either the supplied 3M VHB double-sided tape or mechanical hardware, with paper installation templates included to help ensure proper positioning for optimal aerodynamic performance.
The primary purpose of the dive planes is to shift the vehicle's aerodynamic balance forward, making them particularly useful for vehicles equipped with larger rear wings or rear diffusers that increase rear aerodynamic load.
Fitment
2015+ Subaru WRX / WRX STI – VA Chassis
- Subaru WRX VA – 2015 and newer
- Subaru WRX STI VA – 2015 and newer
- Designed specifically for the VA-generation WRX/STI
- Available in single or dual dive plane configurations
- Designed to complement larger rear wings and rear diffusers
- Part of the Verus Engineering Ventus 2 aerodynamic package
What's Included
- 2 × Right-Hand Dive Planes
- 2 × Left-Hand Dive Planes
- 4 × Pre-Cut 3M VHB Double-Sided Tape Pieces
- 2 × Installation Templates
- 1 × Hardware Kit with all necessary installation hardware
Key Features
- Increased Front Downforce: Generates additional aerodynamic load at the front of the vehicle.
- Reduced Lift: Helps reduce front-end lift and improve high-speed stability.
- Forward Aero Balance: Shifts aerodynamic balance toward the front to help compensate for larger rear aerodynamic components.
- Single or Dual Configuration: Allows the driver to select a smaller or larger increase in front-end downforce.
- Fine-Tunable Aero Balance: Provides an additional method for adjusting the vehicle's aerodynamic balance toward the front.
- Front Wheel Well Evacuation: Helps evacuate air from the front wheel well to reduce unwanted aerodynamic lift.
- Side Sealing: Helps seal the sides of the vehicle and improve airflow management.
- CFD Optimized: Developed using advanced CFD analysis to maximize aerodynamic performance.
- OEM-Like Fit: Designed using internal vehicle scan data for accurate fit and integration.
- Multiple Installation Options: Can be installed using 3M VHB tape or the supplied mechanical hardware.
- Track-Focused Performance: Designed to improve front-end grip and high-speed confidence.
Specifications
- Application: Subaru WRX / WRX STI VA
- Fitment: 2015+
- Configuration: Single or dual
- Construction: Pre-preg carbon fiber
- Curing Process: Autoclave cured
- Design: CFD optimized
- Mounting: 3M VHB tape or mechanical hardware
- Hardware: Stainless steel
- Installation Templates: Included
- Manufacturing: Made in the USA
Aerodynamic Science
Properly designed dive planes, also known as canards, can increase front-end grip and cornering performance by generating additional front downforce and helping reduce lift around the front of the vehicle.
Verus Engineering developed this dive plane kit using ANSYS CFD software to optimize aerodynamic performance within the available space. The design helps generate additional front-end aerodynamic load without requiring the front splitter to extend farther forward.
The dual-configuration design provides flexibility in aerodynamic tuning. A single dive plane configuration provides a smaller increase in front-end downforce, while the dual configuration creates a larger effect on front-end grip and aerodynamic balance.
The dive planes can also help manage airflow around the front wheel wells by assisting with air evacuation and sealing the sides of the vehicle.
Ventus 2 Aerodynamic Package
The Verus Engineering Dive Plane Kit is part of the Ventus 2 aerodynamic package for the VA Subaru WRX/STI.
Ventus 2 was developed to significantly increase the aerodynamic downforce generated by the VA WRX/STI while maintaining a safe and balanced aerodynamic setup at speed. The package is designed to help the vehicle make better use of available tire grip during track driving while increasing driver confidence during high-speed street driving.
Ventus 2 is primarily oriented toward track-focused applications, but the package can still be used on a vehicle that is driven regularly on the street.
Installation
The dive planes can be installed using either the supplied 3M VHB double-sided tape or the included mechanical hardware.
Two installation templates are included to help accurately position the dive planes on the vehicle and ensure proper placement for aerodynamic performance.
