Description
The Anderson Composites Type-ST Fiberglass Front Bumper is designed to give select Ford Mustang models an aggressive, performance-inspired front-end appearance. Featuring a wider and lower profile than the original factory bumper, this Type-ST design is approximately 1.5 inches wider and 2.5 inches lower than the OE Mustang bumper.
Manufactured using a vacuum-infused fiberglass cloth process, the bumper features an integrated fiberglass upper grille surround and includes black plastic honeycomb upper and lower grilles. It is designed to utilize the original Mustang turn signal assemblies for a coordinated installation.
This front bumper is specifically engineered to work with the matching Anderson Composites Type-ST Fiberglass Fenders. It is not compatible with factory fenders or Anderson Composites GT350-style fenders. Model-specific extender kits are required, so the correct kit must be selected for the Mustang GT or EcoBoost.
Features
-
Fiberglass Construction: Manufactured using a vacuum-infused process with fiberglass cloth.
-
Aggressive Type-ST Styling: Features a wider, lower profile for a distinctive front-end appearance.
-
Wider Design: Approximately 1.5 inches wider than the original factory Mustang bumper.
-
Lower Profile: Approximately 2.5 inches lower than the OE bumper.
-
Integrated Upper Grille Surround: The fiberglass upper grille surround is molded into the bumper and is not removable.
-
Honeycomb Grilles Included: Includes black plastic upper and lower honeycomb grilles.
-
Factory Turn Signal Compatibility: Designed to utilize the original Mustang turn signal assemblies.
-
Designed for Type-ST Fenders: Requires the matching Anderson Composites Type-ST Fiberglass Fenders.
Vehicle Fitment
Designed for select 2018–2020 Ford Mustang EcoBoost and GT models, with additional fitment years listed in the supplied application table.
-
2018–2020 Ford Mustang EcoBoost
-
2018–2020 Ford Mustang EcoBoost Premium
-
2018–2022 Ford Mustang GT
-
2018–2022 Ford Mustang GT Premium
-
2019–2020 Ford Mustang Bullitt
Required Fenders: Anderson Composites Type-ST Fiberglass Fenders, part number AC-FF18FDMU-ST-GF.
Not Compatible With: Factory Mustang fenders or Anderson Composites GT350-style fenders.
Installation Notes
-
Requires the wider Anderson Composites Type-ST Fiberglass Fenders, part number AC-FF18FDMU-ST-GF.
-
A model-specific extender kit is required. Select the correct configuration when ordering:
-
Mustang GT: 2-piece extender kit.
-
Mustang EcoBoost: 4-piece extender kit.
-
-
Test fit the bumper on the vehicle before painting to verify fitment and alignment.
-
Additional pre-paint materials may be required to achieve the desired finish.
-
Mounting tabs may require modification, and minor adjustments may be necessary during installation.
-
Professional installation by a body shop experienced with fiberglass and composite body components is recommended.
The standard shipping rate applies to orders within the continental United States. If you intend to place an order outside of the continental US, please reach out to support@x-ph.com for assistance.
