Description
The Anderson Composites Type-ST Fiberglass Decklid with Integrated Spoiler is designed for the 2015–2023 Ford Mustang, combining a sleek integrated spoiler design with a lightweight fiberglass construction. This decklid provides a performance-inspired appearance while reducing weight compared with the factory component.
Manufactured using a vacuum-infused fiberglass cloth process, the decklid is handcrafted with attention to construction quality and fitment. Weighing approximately 17.0 lbs. compared with the stock decklid's 21.0 lbs., it offers a weight-saving alternative for Mustang owners seeking a distinctive rear-end appearance.
This decklid uses original equipment (OE) mounting hardware, which is not included. The fiberglass surface requires standard sanding, primer, and paint preparation before installation and finishing.
Features
-
Fiberglass Construction: Manufactured using a vacuum-infused process with fiberglass cloth.
-
Integrated Spoiler Design: Combines the decklid and spoiler into a unified, performance-inspired appearance.
-
Lightweight Design: Weighs approximately 17.0 lbs., compared with 21.0 lbs. for the factory decklid.
-
Handcrafted Quality: Carefully manufactured with attention to construction and finish preparation.
-
OE Hardware Compatibility: Mounts using factory hardware, which is not included.
-
Paint-Ready Surface: Requires normal sanding, priming, and preparation before painting.
Vehicle Fitment
Designed for select 2015–2023 Ford Mustang models, including:
-
2015–2022 Ford Mustang GT
-
2015–2020 Ford Mustang Shelby GT350R
-
2015–2020 Ford Mustang EcoBoost Premium
-
2015–2022 Ford Mustang GT Premium
-
2015–2017 Ford Mustang V6
-
2015–2020 Ford Mustang EcoBoost
-
2015–2020 Ford Mustang Shelby GT350
-
2015 Ford Mustang GT 50 Years Limited Edition
-
2019–2020 Ford Mustang Bullitt
-
2020–2022 Ford Mustang Shelby GT500
Body Style: Coupe only. Not compatible with convertible models.
Installation Notes
-
Original equipment mounting hardware is not included.
-
The decklid does not have pre-drilled holes for the wiring harness or panel. Dimples are provided to indicate drilling locations.
-
The backup camera mount must be relocated from the original black plastic taillight panel to the inside of the fiberglass trunk. Custom work may be required.
-
Check the backup camera mounting opening before installation. Excess resin may need to be sanded away to achieve proper fitment. Do not force the camera into the opening.
-
Normal pre-paint preparation is required, including sanding and primer application.
-
Minor surface blemishes may be present from the manufacturing process and can generally be addressed during normal sanding and preparation.
-
This product ships via ground truck freight only.
-
Professional installation is recommended, particularly for wiring, backup camera relocation, and custom fitment work.
The standard shipping rate applies to orders within the continental United States. If you intend to place an order outside of the continental US, please reach out to support@x-ph.com for assistance.
