Description
The Anderson Composites Type-ST Fiberglass Fenders are designed for select 2018–2023 Ford Mustang EcoBoost and GT models, delivering aggressive styling with a wider profile than the factory fenders. These fenders extend approximately 0.75 inches wider than the original equipment (OE) fenders and are specifically designed to work with the Anderson Composites Type-ST Front Bumper.
Manufactured using a vacuum-infused fiberglass cloth process, these handcrafted fenders offer a lightweight alternative to the factory components. Each fender weighs approximately 4.7 lbs., compared with 4.9 lbs. for the stock OE fender.
Designed for a coordinated exterior upgrade, these fenders require the wider Anderson Composites Type-ST front bumper, part number AC-FB18FDMU-ST-GF. They are not compatible with the factory bumper or other aftermarket bumpers. Proper test fitting and surface preparation are essential before painting and final installation.
Features
-
Fiberglass Construction: Manufactured using a vacuum-infused process with fiberglass cloth.
-
Aggressive Type-ST Styling: Features a wider profile for a more distinctive front-end appearance.
-
Wider Fender Design: Approximately 0.75 inches wider than the original factory Mustang fenders.
-
Lightweight Construction: Each fender weighs approximately 4.7 lbs., compared with 4.9 lbs. for the stock OE fender.
-
Designed for Type-ST Front Bumper: Requires Anderson Composites front bumper part number AC-FB18FDMU-ST-GF.
-
Paint-Ready Preparation: Requires sanding, primer, and standard pre-paint preparation.
Vehicle Fitment
Designed for select 2018–2023 Ford Mustang EcoBoost and GT models.
-
2018–2020 Ford Mustang EcoBoost
-
2018–2020 Ford Mustang EcoBoost Premium
-
2018–2022 Ford Mustang GT
-
2018–2022 Ford Mustang GT Premium
-
2019–2020 Ford Mustang Bullitt
Not compatible with: Ford Mustang Shelby GT350, GT350R, or GT500.
Required Component: Anderson Composites Type-ST Front Bumper, part number AC-FB18FDMU-ST-GF.
Bumper Compatibility: Does not fit the factory front bumper or other aftermarket bumpers.
Installation Notes
-
These fenders must be installed with the wider Anderson Composites Type-ST front bumper, part number AC-FB18FDMU-ST-GF.
-
Test fit the fenders on the vehicle before painting to verify alignment and fitment.
-
Normal pre-paint preparation is required, including sanding and primer application.
-
Minor surface blemishes may occur during manufacturing and should be addressed during normal sanding and preparation.
-
Mounting tabs may require modification, and minor adjustments may be necessary during installation.
-
Professional installation by a body shop experienced with fiberglass and composite body components is recommended.
The standard shipping rate applies to orders within the continental United States. If you intend to place an order outside of the continental US, please reach out to support@x-ph.com for assistance.
