Description
The Verus Engineering Dive Plane Kit for the Ford Focus ST adds front-end downforce without requiring the front splitter to be moved farther forward. Designed using advanced aerodynamic analysis during development, these dive planes are optimized to generate increased downforce within the available installation area.
The dive plane kit is designed for Focus ST owners looking to shift aerodynamic balance toward the front of the vehicle, making it particularly useful for balancing a larger rear wing, rear diffuser, or other rear-end aerodynamic components.
As part of Verus Engineering's Racer Special program, these dive planes feature cosmetic blemishes that fall outside Verus Engineering's normal finishing standards. The blemishes are cosmetic only; the products remain structurally sound and fully functional.
Important: Product images shown for this listing may not represent the exact blemished unit you will receive. Cosmetic imperfections vary from item to item. Photos of the available product may be requested before purchase.
All Racer Special blemished products are final sale and are not covered by the Verus Engineering warranty.
Fitment
Ford Focus ST
The Verus Engineering Dive Plane Kit is designed specifically for the Ford Focus ST.
Verify your vehicle configuration and installation requirements before ordering.
What's Included
- 1 × Left-Hand Dive Plane
- 1 × Right-Hand Dive Plane
- 2 × Pre-Cut 3M VHB Double-Sided Tape Pieces
- 2 × Installation Templates
- 1 × Hardware Kit with all necessary installation hardware
Key Features
- Increased Front-End Downforce: Helps reduce front-end lift and increase aerodynamic grip at speed.
- Forward Aero Balance: Shifts the vehicle's aerodynamic balance toward the front.
- Aero Balance Tuning: Allows additional adjustment of the vehicle's aerodynamic balance toward a forward bias.
- Front Wheel Well Evacuation: Designed to help evacuate air from the front wheel wells and reduce lift in this area.
- No Further-Forward Splitter Required: Adds front-end downforce without requiring the front splitter to be extended farther forward.
- CFD-Optimized Design: Developed using advanced aerodynamic analysis to maximize performance within the available design volume.
- Track-Focused Performance: Designed for enthusiasts who regularly use their Focus ST on track.
- Racer Special Blemish: Cosmetic surface imperfections only; products remain structurally sound and functional.
Specifications
- Brand: Verus Engineering
- Product: Dive Plane Kit
- Application: Ford Focus ST
- Racer Special: Blemished/Cosmetic Defect
- Design: CFD Optimized
- Construction: Pre-Preg 2x2 Twill Carbon Fiber
- Curing Process: Autoclave Cured
- Installation: 3M Double-Sided Tape or Bolt-On
- Hardware: Stainless Steel
- Installation Template: Included
Aerodynamic Science
Dive planes generate front-end aerodynamic grip by creating a high-pressure region on the upper surface and a low-pressure region on the underside of the dive plane. This pressure differential generates additional downforce at the front of the vehicle.
The Verus Engineering dive planes are also designed to improve front wheel well air evacuation. Removing air from the front wheel well helps reduce lift in this area, further contributing to front-end downforce.
The dive planes can be particularly useful when paired with significant rear aerodynamic modifications. By shifting aerodynamic balance forward, they can help offset the additional rear downforce produced by a large rear wing or diffuser.
For the Focus ST, Verus Engineering designed the dive planes and rear diffuser as an aerodynamic package, allowing the components to work together to improve aerodynamic performance over the factory configuration. The resulting setup is intended for track-focused enthusiasts seeking a more balanced vehicle at high speeds.
Installation
The kit includes installation templates, pre-cut 3M VHB double-sided tape, and stainless steel hardware. Depending on the installation method, the dive planes can be installed using the supplied adhesive or a bolt-on mounting method.
Accurate positioning using the included templates is important for proper fitment and aerodynamic performance.
Racer Special – Blemished Product Information
Racer Special products are offered when Verus Engineering has units with cosmetic imperfections or finishing tolerances outside its standard expectations.
- Cosmetic blemishes only: Imperfections affect surface finish and appearance, not structural integrity.
- Fully functional: Blemished products are structurally sound and designed to perform as intended.
- Unique imperfections: The exact blemishes vary from unit to unit.
- Product images: Images shown may not represent the exact blemished product.
- Final sale: All Racer Special blemished products are final sale.
- Warranty: Racer Special blemished products are not covered by the Verus Engineering warranty.
- Product photos: Photos of the available unit may be requested before purchase.
The standard shipping rate applies to orders within the continental United States. If you intend to place an order outside of the continental US, please reach out to support@x-ph.com for assistance.
