Description
The Verus Engineering Dive Plane Kit for the Ford Focus ST is designed to increase front-end downforce without requiring the front splitter to be extended farther forward. This provides an effective way to add front-end aerodynamic load while maintaining a more practical splitter configuration.
Using state-of-the-art aerodynamic analysis software during the research and development process, Verus Engineering optimized the dive plane geometry to extract additional aerodynamic performance from the available design volume, increasing the downforce generated by the dive planes.
The kit is designed for Focus ST owners looking to shift the vehicle's aerodynamic balance forward, helping counteract the effects of a large rear wing, rear diffuser, or other rear aerodynamic components.
Dive planes, also known as canards, increase front-end grip at higher speeds by generating a pressure differential across their surfaces. High pressure forms on the upper surface while lower pressure forms beneath the dive plane, producing additional aerodynamic load at the front of the vehicle.
The design also helps evacuate air from the front wheel wells. Improved wheel well evacuation can reduce lift in this area, further contributing to front-end aerodynamic performance.
Fitment
Ford Focus ST
The Verus Engineering Dive Plane Kit is designed specifically for the Ford Focus ST and installs at the front of the vehicle.
Application:
- Ford Focus ST
- Front bumper/front aerodynamic area
- Left-hand and right-hand dive planes
- Designed to complement the Verus Engineering Focus ST Rear Diffuser
- Developed as part of a balanced Focus ST aerodynamic package
What's Included
- 1 × Dive Plane – Left-Hand
- 1 × Dive Plane – Right-Hand
- 2 × 3M VHB Double-Sided Tape Pieces, Cut to Shape
- 2 × Installation Templates
- 1 × Hardware Kit with all necessary installation hardware
Key Features
- Increases Front-End Downforce: Adds aerodynamic load at the front without requiring a larger or more aggressively extended front splitter.
- Reduces Lift: Helps reduce front-end lift and increase downforce at higher speeds.
- Shifts Aero Balance Forward: Moves aerodynamic balance toward the front of the vehicle.
- Fine-Tunes Aero Balance: Allows the vehicle to be tuned toward a forward-biased aerodynamic setup.
- Balances Rear Aero: Helps counteract the aerodynamic influence of large rear wings, rear diffusers, and other rear aerodynamic devices.
- Improves Front-End Grip: Additional front aerodynamic load helps improve high-speed front-end grip.
- Improves Wheel Well Evacuation: Helps evacuate air from the front wheel wells and reduce lift in this area.
- Helps Seal Vehicle Sides: Improves airflow management around the front sides of the vehicle.
- CFD Optimized: Developed using advanced aerodynamic analysis and CFD optimization.
- Premium Carbon Fiber Construction: Manufactured from pre-preg 2x2 twill carbon fiber using an autoclave-cured construction.
- Flexible Installation: Supports either 3M VHB double-sided tape or bolt-on installation.
- Installation Templates Included: Templates assist with accurate positioning during installation.
Specifications
- Brand: Verus Engineering
- Application: Ford Focus ST
- Component Type: Front Dive Plane / Canard Kit
- Material: Pre-Preg 2x2 Twill Carbon Fiber
- Manufacturing: Autoclave Cured
- Design: CFD Optimized
- Installation: 3M VHB Double-Sided Tape or Bolt-On
- Hardware: Stainless Steel
- Templates: Included
Aerodynamic Science
Dive planes provide an efficient way to add front-end downforce without significantly changing the size or position of the front splitter.
The aerodynamic effect is created through a pressure differential across the dive plane. High pressure develops on the upper surface while lower pressure forms underneath, generating additional aerodynamic load at the front of the Focus ST.
This additional front-end load can be used to tune the vehicle's overall aerodynamic balance. When a large rear wing or rear diffuser is added, the increased rear downforce can shift the vehicle's aero balance rearward. The Verus Engineering Dive Plane Kit allows additional aerodynamic load to be introduced at the front, helping create a more balanced setup.
The dive planes also assist with front wheel well air evacuation. Removing air from the wheel well can reduce localized lift and further improve front-end aerodynamic performance.
Focus ST Aero Package
The Verus Engineering Focus ST Dive Plane Kit and Rear Diffuser were designed to function together as an aerodynamic package.
The goal of the package is to improve aerodynamic performance over the factory vehicle while maintaining a balanced aero setup at speed. The combination is intended for enthusiasts who regularly participate in track days and want an effective aerodynamic package that improves the vehicle's performance at higher speeds.
The dive planes add front-end aerodynamic load while the rear diffuser contributes rear aerodynamic performance. Using both components together allows the vehicle's aerodynamic balance to be developed as a complete package rather than relying on isolated front or rear aerodynamic modifications.
Installation
The kit includes two installation templates to assist with accurate placement of the dive planes.
Installation can be completed using the supplied 3M VHB double-sided tape or through a bolt-on installation using the included stainless steel hardware.
The standard shipping rate applies to orders within the continental United States. If you intend to place an order outside of the continental US, please reach out to support@x-ph.com for assistance.
