Description
The CANchecked MFD28 Gen2 Multi Function Display is an integrated digital monitoring and diagnostics system designed specifically for the 2024+ Toyota GR Yaris XP210 and 2024+ Toyota GR86 ZN8.
Manufactured in Germany, the MFD28 Gen2 transforms the factory air-vent area into a fully integrated 2.8-inch touchscreen display while maintaining functional airflow. The vehicle-specific vent assembly provides an OEM-style interior integration without the appearance of an aftermarket gauge pod.
Through direct CAN bus communication and manufacturer-specific protocols, the MFD28 Gen2 provides access to a wide range of real-time vehicle parameters directly from the vehicle's control modules. Drivers can configure multiple display pages, monitor engine and vehicle data, log information, read supported diagnostic trouble codes, and measure vehicle performance.
The intuitive touchscreen interface uses swipe navigation and supports extensive customization, allowing users to create personalized pages with configurable widgets, colors, graphics, alarms, and performance information.
The MFD28 Gen2 is suitable for daily-driven vehicles, track cars, and modified performance builds where detailed vehicle monitoring and data access are important.
Fitment
Toyota GR Yaris (XP210) – 2024+
Toyota GR Yaris XP210 – Left-Hand Drive (LHD) and Right-Hand Drive (RHD)
Toyota GR86 (ZN8) – 2024+
Toyota GR86 ZN8 – Left-Hand Drive (LHD) and Right-Hand Drive (RHD)
The CANchecked MFD28 Gen2 is specifically designed for the vehicle applications listed above. Verify your exact vehicle, model year, control units, and software configuration before purchase and installation, as available CAN data and functions can vary between vehicles.
What's Included
- 1 × CANchecked MFD28 Gen2 2.8" Display Integrated into Vehicle-Specific Vent Assembly
- 1 × Vehicle-Specific Connection Harness
- 1 × Quick Start Guide
- 1 × USB Data Cable
- 1 × Pre-Installed SD Card
- 1 × SD Card Adapter
- 1 × Anti-Reflection Display Film
Key Features
- 2.8-Inch Touchscreen Display: High-resolution capacitive touchscreen with intuitive swipe navigation.
- Direct CAN Bus Communication: Accesses real-time vehicle information directly through the vehicle's CAN bus.
- Real-Time Vehicle Monitoring: Displays a wide range of engine and vehicle parameters.
- Vehicle-Specific Vent Integration: Replaces the factory air-vent area while maintaining functional airflow.
- Custom Display Pages: Create personalized pages with configurable layouts and widgets.
- Up to 10 Display Pages: Configure multiple screens for different driving and monitoring requirements.
- Up to 64 Widgets Per Page: Arrange and display extensive vehicle information on each page.
- Performance Meter: Measure acceleration times and benchmark vehicle performance.
- Diagnostic Trouble Code Support: Read and clear supported diagnostic trouble codes directly from the display.
- Internal Data Logging: Record vehicle information using the integrated SD card.
- Automatic Display Dimming: Supports automatic dimming with vehicle illumination on compatible applications.
- Ethanol Monitoring: Supports direct ethanol content and temperature monitoring.
- External Shift Light Support: Compatible with external CANchecked shift light modules.
- Four Analog Inputs: Allows additional analog sensors to be integrated into the monitoring system.
- CAN Switching: Supports CAN switching and custom CAN message functionality.
- Custom Alarms: Configure warnings and notifications for monitored parameters.
- DSS Software Support: Provides advanced display and configuration options.
- Made in Germany: Manufactured in Germany using advanced engineering and production processes.
Monitored Parameters
Depending on vehicle compatibility and available CAN data, the MFD28 Gen2 can display parameters including:
- Oil Temperature
- Coolant Temperature
- Exhaust Gas Temperature
- Intake Air Temperature
- Boost Pressure
- Fuel Pressure
- Rail Pressure – Actual and Target
- Lambda Values
- Fuel Trims
- Engine RPM
- Vehicle Speed
- Throttle Position
- Ignition Timing
- Cylinder Correction Values
- Torque Output
- Gear Position
- Battery Voltage
Available parameters can vary according to the vehicle, model year, installed control units, and software configuration.
Display Customization
The CANchecked MFD28 Gen2 provides extensive options for creating a personalized monitoring interface.
Users can:
- Create custom display pages
- Drag and drop widgets
- Adjust widget size and positioning
- Customize display colors
- Upload custom graphics
- Create custom startup animations
- Configure alarms and warning notifications
- Use math channels for advanced calculations
- Configure 2D and 3D user mapping functions
- Access the integrated CAN logger and data viewer through DSS software
Performance Monitoring & Data Logging
The integrated performance meter allows users to measure acceleration and benchmark vehicle performance.
The MFD28 Gen2 also includes internal SD card data logging, allowing vehicle information to be recorded for later analysis. The system can be used to monitor vehicle behavior during street driving, track sessions, tuning, and performance testing.
CAN Bus & Vehicle Data Integration
The MFD28 Gen2 communicates directly with the vehicle through the CAN bus and manufacturer-specific communication protocols.
This allows the display to access vehicle information beyond the basic parameters typically available through standard OBD diagnostics on supported applications.
CANchecked develops dedicated vehicle integrations for selected platforms, but available data and functions can vary depending on the vehicle manufacturer, model year, installed control units, and software version.
Analog & External Sensor Integration
The MFD28 Gen2 provides four analog sensor inputs for expanded monitoring capabilities.
Compatible CANchecked accessories include:
- SLM08 External Shift Light Module
- ANC04 Analog Input Harness
- CBD08 CAN Distribution Hub
- NTC01 Temperature Sensor
- TCC01 Type-K Temperature Converter
- FLP01 Pressure Sensor
- BST10 Boost Pressure Sensor
The system also supports direct ethanol content and temperature monitoring on compatible applications.
Installation
The MFD28 Gen2 is integrated into a vehicle-specific air-vent assembly designed for the applicable Toyota platform.
The included vehicle-specific connection harness is used to connect the display to the vehicle's communication and electrical systems.
The integrated vent design maintains functional airflow while providing a clean, OEM-style installation.
Verify vehicle compatibility and available data before installation.
Important Compatibility & Data Notice
CANchecked products communicate directly with the vehicle through the CAN bus. Available vehicle data, functions, and parameters may vary depending on the manufacturer, model, model year, installed control units, and software version.
Not all displayed values are intended for diagnostic or safety-critical purposes. Displayed information should not be relied upon as the sole source for vehicle operation, diagnostics, maintenance, tuning, or safety-related decisions.
Customers are responsible for verifying compatibility with their specific vehicle before purchasing and installing the product.
Specifications
- Brand: CANchecked
- Product: MFD28 Gen2 Multi Function Display
- Display Size: 2.8 Inches
- Display Type: Capacitive Touchscreen
- Communication: CAN Bus
- Vehicle Integration: Vehicle-Specific Vent Assembly
- Display Pages: Up to 10 Configurable Pages
- Widgets: Up to 64 Widgets Per Page
- Analog Inputs: 4
- Data Logging: Internal SD Card
- Diagnostic Functions: Read/Clear Supported DTCs
- Performance Functions: Integrated Performance Meter
- Ethanol Monitoring: Supported on Compatible Applications
- External Shift Light: Supported
- CAN Switching: Supported
- Custom CAN Messages: Supported
- Software: DSS
- Drive Configuration: LHD / RHD
- Manufacturing: Made in Germany
