Description
The Verus Engineering Front Splitter Kit for the Honda Civic Type R FK8 is designed to significantly increase front-end downforce while maintaining the factory bumper's original lines and appearance. Developed using detailed vehicle scan data and advanced aerodynamic analysis, the splitter provides functional aerodynamic performance with a near-OEM fit and finish.
Front splitters generate downforce by creating a significant pressure difference between the air flowing over the top of the splitter and the lower-pressure air underneath it. Verus Engineering optimized the splitter using state-of-the-art analysis software to improve front-end aerodynamic performance while maintaining an efficient overall aerodynamic balance.
The splitter is engineered to withstand the aerodynamic loads it generates. Unlike aluminum splitter designs that can potentially pull underneath the vehicle, this splitter uses a durable, lightweight plastic construction combined with chassis-mounted support points, two splitter tie assemblies, and multiple bumper mounting locations.
The design was developed specifically for Civic Type R owners looking to combat front-end lift and increase high-speed front-end grip. By increasing front downforce, the splitter helps improve tire traction and vehicle stability at speed.
The front splitter is also designed to complement Verus Engineering rear aerodynamic components, making it an effective solution for balancing a vehicle equipped with additional rear aero such as a larger rear wing or rear diffuser.
Fitment
Honda Civic Type R FK8
Application: Front bumper / front-end aerodynamic splitter
Vehicle Platform: FK8 Civic Type R
The Verus Engineering Front Splitter Kit is specifically designed for the FK8 Honda Civic Type R, following the OE bumper contours for a clean, integrated appearance.
What's Included
- 1 × Splitter Blade
- 2 × Splitter Tie Assemblies
- 4 × Splitter Clevis
- 4 × Splitter Extensions
- 1 × Splitter Support Bracket
- 1 × Hardware Kit with all necessary installation components
Key Features
- Increased Front Downforce: Designed to significantly increase front-end downforce and combat aerodynamic lift.
- Improved High-Speed Grip: Additional front downforce helps increase tire grip and traction at speed.
- CFD Tested: Developed and tested using advanced computational fluid dynamics analysis.
- Improved Aerodynamic Efficiency: Designed to improve the vehicle's overall lift-to-drag ratio.
- Balanced Aero Performance: Developed to complement Verus Engineering rear wing and rear aerodynamic components.
- Durable Lightweight Construction: Manufactured from hard, durable plastic to withstand track use while keeping weight under control.
- Chassis-Mounted Support: Uses splitter support rods connected to chassis hardpoints to handle the aerodynamic loads generated by the splitter.
- Non-Invasive Bolt-On Design: Designed for a straightforward installation without extensive vehicle modification.
- OE-Inspired Fit and Finish: Developed using internal vehicle scan data to closely follow the factory bumper contours.
- Track-Friendly Design: Designed to improve aerodynamic performance while remaining practical for vehicles driven to and from the track.
- Reduced Underbody Pull: The plastic construction is designed to avoid the tendency of some aluminum splitters to pull underneath the vehicle.
- Made in the USA: Manufactured in the United States.
Specifications
- Product Type: Front Splitter Kit
- Vehicle: Honda Civic Type R FK8
- Construction: Hard, durable lightweight plastic
- Aerodynamic Development: CFD tested
- Mounting: Chassis-mounted support rods and multiple bumper mounting points
- Support: 2 splitter tie assemblies
- Hardware: Stainless steel hardware
- Fitment Development: Internal vehicle scan data
- Manufacturing: Made in the U.S.A.
Aerodynamic Science
The Verus Engineering FK8 Civic Type R Front Splitter is part of the Ventus 2 aerodynamic package. Ventus 2 is designed to provide a substantial increase in downforce compared with the Ventus 1 package, while accepting a slight increase in aerodynamic drag.
The primary objective of the Ventus 2 package is to reduce lap times while maintaining a configuration that remains practical for enthusiasts who drive their vehicles to and from the track. The system was developed for the typical track-day enthusiast looking for a balanced aerodynamic setup that improves downforce efficiently and safely.
The front splitter works by creating a pressure differential between its upper and lower surfaces. At speed, this pressure difference generates additional front-end downforce, helping counteract the natural tendency of the vehicle to produce front lift.
Additional front downforce is particularly useful when the vehicle has been equipped with larger rear aerodynamic components. A larger rear wing or rear diffuser can shift the vehicle's aerodynamic balance rearward, making additional front-end downforce important for maintaining a balanced setup.
Ventus 2 Package
The FK8 Civic Type R Front Splitter forms part of the Verus Engineering Ventus 2 package, which is designed for enthusiasts seeking significantly greater aerodynamic performance than the Ventus 1 setup.
Ventus 2 focuses on increasing overall vehicle downforce while maintaining an efficient and balanced aerodynamic configuration suitable for track-day use. The package is intended to improve high-speed grip and help reduce lap times without turning the vehicle into an impractical setup for street driving.
Installation
The Verus Engineering Front Splitter is designed as a simple, non-invasive bolt-on system. The splitter is secured through multiple bumper mounting locations and chassis hardpoints using the supplied splitter tie assemblies, clevises, extensions, support bracket, and hardware.
The chassis-mounted support structure is designed to handle the aerodynamic loads generated by the splitter while maintaining a secure installation.
