SuperPro 2006 Audi A3 Base Front HD Adjustable End Link Set - sprTRC12265

Improve suspension performance and optimize sway bar positioning with the SuperPro Front Heavy-Duty Adjustable End Link Set (Part Number: sprTRC12265). Designed for compatible vehicle applications, these performance-grade adjustable sway bar end links help reduce link flex, maintain neutral sway bar positioning, and maximize the effectiveness of SuperPro Roll Control adjustable sway bars.

The TRC12265 features an adjustable length of 320mm–365mm (12.6–14.4 inches) and 12mm ball joint studs. The length is measured from the center of one ball joint stud to the center of the other. This adjustable design helps accommodate certain raised or lowered vehicle setups and allows sway bar positioning to be fine-tuned for the vehicle's suspension configuration.

Constructed with 6060-T5 alloy link balls for low friction and long service life, these end links feature spanner provisions for adjustment while installed on the vehicle. They are designed to replace difficult-to-find original equipment links, help eliminate sway bar link flex, and make better use of the adjustment positions available on adjustable sway bars.

Installation note: Read the fitting instructions before installation. Changes in ride height may require a shorter or longer end link. Some aftermarket coilover systems relocate the end link mounting tab, which can also affect the required length. Measure the required length and consult SuperPro technical support if you are unsure which link set is appropriate.

Features and Benefits

• Adjustable Length: 320mm–365mm (12.6–14.4 inches).

• 12mm Ball Joint Studs: Designed for compatible sway bar mounting points.

• 6060-T5 Alloy Link Balls: Provide low friction and long service life.

• On-Car Adjustment: Spanner provisions allow convenient adjustment while installed.

• Reduced Link Flex: Helps minimize sway bar end link flex.

• Neutral Sway Bar Positioning: Supports correct sway bar positioning for improved suspension operation.

• Optimized Adjustable Sway Bar Performance: Helps maximize the available adjustment positions on compatible sway bars.

• Raised or Lowered Vehicle Compatibility: Adjustable length can accommodate certain modified ride heights when dimensions and mounting points are compatible.

• Replacement Link Design: Offers an alternative to hard-to-find original equipment links.

• Kit Contents: Two adjustable end links.

Product Specifications

• Brand: SuperPro

• Part Number: sprTRC12265

• Product Type: Heavy-Duty Adjustable Sway Bar End Link Set

• Position: Front

• Adjustable Length: 320mm–365mm (12.6–14.4 inches)

• Ball Joint Stud Diameter: 12mm

• Boot Material: High-temperature rubber

• Dust Boots Included: Yes

• Bolts Included: Yes

• Hardware Included: Yes

• Locking Nuts Included: Yes

• Washers Included: Yes

• Pre-Greased: Yes

• Greaseable: No

• Grease Fittings Included: No

• Grade Type: Performance

• Installation Difficulty: Moderate

• Installation Time: 1 hour

• Wheel Alignment Required: No

• Prop 65 Warning: This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.

Vehicle Fitment

The product title identifies the 2006 Audi A3 Base, but no detailed vehicle fitment list was provided with this item. Confirm compatibility with the exact vehicle, front mounting configuration, and required end link length before ordering.