Description
Convert your Subaru’s factory 5x100 bolt pattern to accept aftermarket wheels with a 5x114.3 bolt pattern using the FactionFab 20mm Wheel Spacer Conversion Set. Designed as a vehicle-specific, hub-centric conversion solution, these spacers allow you to expand your wheel selection while also increasing track width and creating a more flush, aggressive appearance.
Each spacer is 20mm thick, providing additional wheel clearance and moving the wheel outward for improved fitment and a wider stance. The hub-centric design is engineered specifically for compatible Subaru applications, helping maintain proper wheel and hub alignment during installation.
The spacers are manufactured from forged 6061-T6 high-strength aluminum, offering a lightweight construction with a high strength-to-weight ratio. A black Type II hard-anodized finish provides protection against oxidation and corrosion while maintaining a clean appearance. Laser-etched specifications and FactionFab branding provide additional identification.
For installation, the spacers feature chamfered lips on both the hub and wheel sides to help with proper seating and alignment. High-strength Grade 12.9 Geomet-coated studs and Grade 8.8 Geomet-coated nuts are included for secure installation and enhanced corrosion resistance.
Important Fitment Note
Due to the OEM wheel studs being longer than the 20mm spacer thickness, the wheels being installed must have pockets or recessed areas on the back of the wheel mounting surface to provide clearance for the factory studs. Always verify sufficient stud clearance before installation.
Key Features
- Converts 5x100 vehicle hubs to 5x114.3 wheel fitment
- 20mm spacer thickness
- Model-specific Subaru fitment
- Hub-centric design for proper hub and wheel alignment
- Expands aftermarket wheel compatibility
- Increases track width for a wider stance
- Helps position wheels more flush with the fenders
- Forged 6061-T6 high-strength aluminum construction
- Lightweight design with a high strength-to-weight ratio
- Black Type II hard-anodized finish
- Provides resistance against oxidation and corrosion
- Chamfered lips on the hub and wheel sides for easier installation
- Grade 12.9 Geomet-coated studs
- Grade 8.8 Geomet-coated nuts
- Laser-etched specifications and FactionFab branding
- Sold as a pair
Technical Specifications
Brand: FactionFab
Product Type: Wheel Spacer Conversion Set
Vehicle Bolt Pattern: 5x100
Wheel Bolt Pattern: 5x114.3
Spacer Thickness: 20mm
Material: Forged 6061-T6 Aluminum
Design: Hub-Centric, Vehicle-Specific
Finish: Black Type II Hard Anodized
Studs: Grade 12.9 Geomet Coated
Nuts: Grade 8.8 Geomet Coated
Quantity: 2 Spacers
Installation & Torque Information
Tighten the spacer studs according to the OEM vehicle torque specifications. Blue Loctite is recommended for application to the OE studs where applicable. Before installation, confirm that the aftermarket wheels have adequate pockets or recessed areas on the mounting surface to clear the longer OEM studs. Failure to provide sufficient stud clearance may prevent the wheel from seating properly.
Always verify the vehicle, hub bore, wheel specifications, stud clearance, and brake clearance before installation.
