Description
Convert your vehicle's 5x114.3 bolt pattern to 5x100 while adding 20mm of track width with the FactionFab 20mm Wheel Spacer Conversion Set. Designed for compatible Subaru applications, these model-specific hub-centric conversion spacers allow vehicles with a 5x114.3 hub pattern to run compatible 5x100 wheels.
In addition to changing the bolt pattern, the 20mm spacer thickness moves the wheels outward to create a wider track profile and a more flush appearance with the fenders. The additional spacing can also help provide clearance for certain aftermarket wheel and brake combinations.
FactionFab manufactures these conversion spacers from forged 6061-T6 high-strength aluminum, providing an excellent strength-to-weight ratio for demanding street and performance applications. Precision-machined, vehicle-specific hub-centric construction helps ensure accurate fitment between the vehicle hub, spacer, and wheel.
Key Features
- 5x114.3 to 5x100 bolt pattern conversion
- 20mm spacer thickness
- Allows compatible 5x114.3 vehicles to accept 5x100 wheels
- Model-specific, hub-centric design
- Creates a wider track profile and more aggressive wheel stance
- Helps position wheels more flush with the fenders
- May provide additional clearance for certain wheel and brake combinations
- Constructed from forged 6061-T6 high-strength aluminum
- Excellent strength-to-weight ratio
- Black Type II hard-anodized finish for improved corrosion and oxidation resistance
- Laser-etched specifications and FactionFab branding
- Chamfered lips on both hub and wheel sides for easier installation
- Grade 12.9 Geomet-coated studs
- Grade 8.8 Geomet-coated lug nuts
- Sold as a pair of two conversion spacers
Forged 6061-T6 Aluminum Construction
Each spacer is manufactured from forged 6061-T6 aluminum, a high-strength material known for its excellent yield-strength-to-weight ratio. The forged construction provides the strength required for demanding wheel and suspension applications while keeping unnecessary weight to a minimum.
The spacers are precision-machined specifically for the intended application, providing a hub-centric interface between the vehicle and wheel. This vehicle-specific design helps properly locate the wheel and maintain consistent load distribution.
Durable Black Hard-Anodized Finish
FactionFab applies a Type II black hard-anodized finish to help protect the aluminum surface against oxidation and corrosion. The coating also helps reduce the potential for galvanic corrosion that can occur when dissimilar metals are in contact.
Laser-etched specifications and FactionFab branding provide a clean, professional appearance while keeping important product information visible.
High-Strength Hardware
The conversion spacers are equipped with Grade 12.9 studs featuring a Geomet corrosion-resistant coating. Included Grade 8.8 Geomet-coated lug nuts provide durable hardware for securing the wheels to the conversion spacers.
Chamfered lips on both sides of the spacers are designed to make installation easier and provide proper engagement between the vehicle hub, spacer, and wheel.
Installation & Torque Information
Tighten the wheel spacer hardware according to the OEM torque specifications for the applicable vehicle. FactionFab recommends applying blue Loctite to the OE studs during installation.
Before driving, carefully verify that the wheel, tire, spacer, hub, brake components, and suspension have adequate clearance throughout the full range of steering and suspension travel. Recheck all fasteners following the manufacturer's recommended installation procedure.
Specifications
- Brand: FactionFab
- Application: Compatible Subaru 5x114.3 vehicles
- Original Bolt Pattern: 5x114.3
- Wheel Bolt Pattern: 5x100
- Conversion: 5x114.3 to 5x100
- Spacer Thickness: 20mm
- Material: Forged 6061-T6 Aluminum
- Design: Hub-Centric
- Finish: Black Type II Hard Anodized
- Stud Grade: 12.9
- Stud Coating: Geomet
- Nut Grade: 8.8
- Nut Coating: Geomet
- Quantity: 2 Conversion Spacers
