Description
Upgrade the front braking system of your 2013-2020 Subaru BRZ, Scion FR-S, Toyota 86, or 2022-2026 Subaru BRZ / Toyota GR86 equipped with non-Brembo brakes with the FactionFab Full Front Brake Kit Combo. This complete performance brake package combines V2 high-carbon slotted rotors, semi-metallic performance brake pads, stainless steel brake lines, and titanium thermal shims to improve braking consistency, pedal feedback, heat management, and overall brake performance.
Designed for enthusiasts who use their vehicle for daily driving, aggressive street driving, autocross, and light track use, this kit provides a comprehensive front brake upgrade in one convenient package.
Purchasing the complete kit also provides an additional 10% discount compared with purchasing the components separately.
Kit Includes
- 2x FactionFab V2 Front Slotted Brake Rotors – Part Number: FFA1.10288.1
- 1x FactionFab V2 Front Brake Pad Set – Part Number: FFA1.10302.1
- 1x Pair FactionFab Front Stainless Steel Brake Lines – Part Number: FFA1.10097.1
- 1x Set FactionFab Titanium Front Brake Shims – Part Number: FFA1.10317.1
- Front brake application
- Non-Brembo brake configuration
FactionFab V2 Performance Brake Pads
FactionFab V2 Brake Pads are engineered for enthusiasts who demand consistent stopping power, predictable modulation, reliable thermal performance, and low-noise operation. The semi-metallic friction compound is designed to dissipate heat efficiently, making these pads well suited for daily driving, aggressive street use, autocross, and light track applications.
The Stage 1 pad compound provides an average coefficient of friction of approximately 0.39µ, with up to 0.44µ at cold temperatures, helping deliver dependable braking performance across a broad range of operating conditions.
OE-spec backing plates, gas slots, chamfers, and laser-cut components provide precise fitment while helping reduce vibration and brake noise.
Brake Pad Features:
- Semi-metallic friction compound
- Designed for aggressive street driving, autocross, and light track use
- Stage 1 performance formulation
- Approximately 0.39µ average coefficient of friction
- Up to 0.44µ at cold temperatures
- Strong low-temperature braking performance
- Efficient heat dissipation
- Predictable thermal behavior under demanding conditions
- Textured steel shims for improved heat dissipation and grease retention
- OE-spec backing plates for precise fitment
- Gas slots and chamfers to help reduce vibration and noise
- Laser-cut backing plates for durability and noise reduction
- Applicable installation hardware included
FactionFab V2 High-Carbon Slotted Brake Rotors
FactionFab V2 Brake Rotors are manufactured from G11H18 high-carbon iron alloy for excellent heat dissipation, durability, and consistent braking performance. The precision-machined F-design slots help evacuate brake dust and gases from the friction surface, helping maintain consistent pad contact during repeated braking.
Each rotor is manufactured using double-disc grinding for accurate thickness and a precise surface finish. The rotors are also mill balanced to help minimize vibration and provide smooth braking performance.
A full Geomet zinc coating is applied to the inside and outside surfaces to provide enhanced corrosion resistance and help maintain the rotors' appearance over time.
The rotors are dual-drilled for 5x100 and 5x114 applications, depending on the vehicle application, and feature threaded M8 removal holes for easier servicing. Each rotor is also stamped with its part number and minimum thickness for convenient inspection.
Brake Rotor Features:
- G11H18 high-carbon iron alloy construction
- Precision-machined F-design slotted surface
- Full Geomet zinc coating inside and outside
- Dual-drilled for 5x100 and 5x114 applications
- Threaded M8 removal holes for easier servicing
- Part number and minimum thickness stamped on the rotor edge
- Bi-directional design for left- or right-side installation
- Double-disc ground for accurate thickness and finish
- Mill balanced for smooth, vibration-free operation
- Designed for consistent braking performance under demanding conditions
FactionFab Stainless Steel Front Brake Lines
The included FactionFab stainless steel brake lines replace the factory rubber brake lines with a model-specific stainless steel construction designed to provide a more direct and consistent brake-pedal response.
Factory rubber brake lines can flex and expand under pressure and heat. The stainless steel lines help minimize this expansion, allowing more direct hydraulic pressure transfer from the brake pedal to the caliper and providing improved pedal feedback.
Each line uses a PTFE Teflon inner liner, stainless steel woven reinforcement, and a clear PCV protective outer coating designed to resist abrasion, impact, and chafing.
Brake Line Features:
- Model-specific design for proper fitment
- Stainless steel precision-machined fittings
- PTFE Teflon inner liner
- Stainless steel woven reinforcement layer
- Abrasion- and impact-resistant construction
- Clear PCV protective outer coating
- Helps protect against chafing and external damage
- Stress relief at fitting locations
- 4500 psi burst-pressure tested
- Increased pedal feedback compared with factory rubber lines
- Helps reduce line swelling and deformation
- Installation hardware included
FactionFab CP3 Grade 2 Titanium Brake Shims
The included FactionFab Titanium Brake Shims are designed to help reduce heat transfer from the brake pads into the caliper pistons during aggressive driving, autocross, and track use.
Repeated hard braking generates substantial heat within the brake system. Excessive heat transferred into the caliper can increase brake-fluid temperatures and contribute to brake fade. The titanium shims create a thermal barrier between the brake pad and caliper piston, helping reduce heat transfer.
The shims are manufactured from CP3 / Grade 2 Titanium, which has relatively low thermal conductivity compared with steel. At 1.0mm thick, the shims provide additional thermal insulation between the brake pad and caliper piston.
Titanium Shim Features:
- 4 shims included
- CP3 / Grade 2 Titanium construction
- 1.0mm thickness
- Low thermal conductivity compared with steel
- Acts as a thermal barrier between the pad and caliper piston
- Helps reduce heat transfer into the caliper and brake fluid
- Helps reduce the potential for heat-related brake fade
- Can help extend brake-pad life during demanding use
- Suitable for street, autocross, and track applications
- May qualify for certain SCCA and NASA classes; always verify current competition rules
Complete Front Brake Performance Upgrade
The FactionFab Full Front Brake Kit Combo brings together the key components needed for a comprehensive front brake upgrade on 2013-2020 Subaru BRZ, Scion FR-S, Toyota 86, and 2022-2026 Subaru BRZ / Toyota GR86 models with non-Brembo brake configurations.
With V2 high-carbon slotted rotors, semi-metallic performance pads, stainless steel brake lines, and titanium thermal shims, this package is designed to provide consistent stopping power, improved pedal response, effective heat management, and reliable braking performance for both street and performance driving.
The complete kit also provides an additional 10% savings compared with purchasing the individual components separately.
Please Note: This kit is intended for non-Brembo brake configurations. Verify your vehicle's exact model year, brake configuration, and fitment before ordering.
