Description
Upgrade your vehicle's rear braking system with the FactionFab Full Brake Kit Combo, a complete performance-focused rear brake package designed for select 2013–2020 Scion FR-S, Subaru BRZ, Toyota 86, and 2022–2026 Subaru BRZ / Toyota GR86 non-Brembo applications.
This convenient kit combines FactionFab V2 Slotted Rear Brake Rotors, V2 Performance Brake Pads, Stainless Steel Brake Lines, and Titanium Brake Shims into one package. Purchasing the components together provides an additional 10% savings compared with buying each component separately, making it an efficient solution for a complete rear brake upgrade.
The kit is designed to improve braking response, thermal management, pedal feedback, and overall braking consistency for daily driving, spirited street driving, autocross, and light track use.
Kit Includes
- 2 × FactionFab V2 Slotted Rear Brake Rotors – SKU FFA1.10289.1
- 1 × Set of FactionFab V2 Rear Brake Pads – SKU FFA1.10303.1
- 1 × Pair of FactionFab Rear Stainless Steel Brake Lines – SKU FFA1.10092.1
- 1 × Set of FactionFab Titanium Rear Brake Shims – SKU FFA1.10317.2
V2 Performance Brake Pads
FactionFab V2 Brake Pads use a semi-metallic compound engineered to provide consistent stopping power, predictable pedal modulation, and effective heat management for aggressive street driving, autocross, and light track use.
The Stage 1 compound offers an average coefficient of friction of approximately 0.39µ, with approximately 0.44µ at cold temperatures, providing strong low-temperature performance while maintaining predictable behavior as temperatures increase.
The semi-metallic formulation is designed to dissipate heat efficiently, helping maintain consistent braking performance during repeated stops. Textured steel shims help with heat dissipation and grease retention, while OE-spec backing plates, gas slots, and chamfers are designed for proper fitment and reduced vibration.
Brake Pad Features
- Semi-metallic Stage 1 compound
- Approximately 0.39µ average coefficient of friction
- Approximately 0.44µ coefficient at cold temperatures
- Designed for aggressive street driving, autocross, and light track use
- Efficient heat dissipation
- Predictable thermal performance
- Strong low-temperature braking performance
- Textured steel shims for heat management and grease retention
- OE-spec backing plates, gas slots, and chamfers
- Laser-cut backing plates for precise fitment and durability
- Designed to reduce vibration and noise
- Hardware included where applicable
V2 Slotted Rear Brake Rotors
The included FactionFab V2 rear rotors are constructed from G11H18 high-carbon iron alloy, providing effective heat dissipation and thermal stability during repeated braking. The rotors feature FactionFab's distinctive F-design slots, which help evacuate brake dust and gases from the pad-to-rotor contact surface for consistent braking performance.
Each rotor is precision manufactured using double-disc grinding for accurate thickness and a consistent surface finish, then mill balanced to help minimize vibration during operation.
A full Geomet zinc coating is applied to the interior and exterior surfaces to improve corrosion resistance. The rotors are also dual drilled for applicable 5x100 and 5x114 bolt patterns and include M8 threaded removal holes for easier servicing.
Brake Rotor Features
- G11H18 high-carbon iron alloy construction
- FactionFab F-design slotted surface
- Designed for improved heat dissipation
- Helps evacuate brake dust and gases
- Full Geomet zinc coating inside and out
- Dual-drilled 5x100 / 5x114 bolt pattern
- 290mm rotor diameter
- M8 threaded removal holes for easier removal
- Part number and minimum thickness stamped on rotor edge
- Bi-directional design for left- or right-side installation
- Double-disc ground for accurate thickness and finish
- Mill balanced for smooth, vibration-free operation
Stainless Steel Rear Brake Lines
The included FactionFab stainless steel brake lines replace the factory rubber brake lines and are designed to provide improved pedal feedback and a more direct braking response.
Factory rubber lines can soften and expand under pressure over time. FactionFab lines use a PTFE Teflon inner liner and stainless steel woven reinforcement to help minimize expansion and maintain consistent brake fluid pressure.
A clear PCV outer coating helps protect the line against abrasion, impacts, and chafing, while precision-machined stainless steel fittings provide accurate fitment and corrosion resistance.
Brake Line Features
- Stainless steel precision-machined fittings
- PTFE Teflon inner liner
- Stainless steel woven reinforcement layer
- Helps minimize brake line expansion
- Clear PCV abrasion-resistant outer coating
- Impact- and abrasion-resistant construction
- 4500 PSI burst pressure tested
- Improved brake pedal feedback
- 100% model-specific fitment
- Installation hardware included
Titanium Rear Brake Shims
The included FactionFab Titanium Brake Shims provide a thermal barrier between the brake pad and caliper piston. During aggressive driving, autocross, and track use, excessive heat can transfer from the brake pad into the caliper and brake fluid. Excessive fluid temperatures can contribute to brake fade.
Made from CP3 / Grade 2 titanium, these 1.0mm-thick shims provide low thermal conductivity compared with conventional steel shims, helping reduce heat transfer into the caliper piston and brake fluid.
By helping manage caliper temperatures, the shims can contribute to improved brake consistency, reduced heat-related fade, and extended brake pad life during demanding driving conditions.
Titanium Shim Features
- 4 titanium shims included
- Made from CP3 / Grade 2 titanium
- 1.0mm thickness
- Low thermal conductivity compared with steel
- Acts as a thermal barrier between brake pad and caliper piston
- Helps reduce heat transfer into the caliper
- Helps reduce the risk of heat-related brake fade
- Can help extend brake pad life
- Suitable for track and autocross applications
- Check official SCCA and NASA regulations for class-specific legality
Vehicle Fitment
- 2013–2020 Scion FR-S
- 2013–2020 Subaru BRZ
- 2017–2020 Toyota 86
- 2022–2026 Subaru BRZ – Non-Brembo
- 2022–2026 Toyota GR86 – Non-Brembo
Important: This kit is intended for the listed non-Brembo applications. Verify your vehicle's exact year, brake configuration, rotor dimensions, and brake package before ordering.
Why Choose the FactionFab Full Rear Brake Kit?
Instead of sourcing individual brake components separately, this package provides the essential components for a complete rear brake upgrade in one convenient kit. The combination of slotted high-carbon rotors, performance semi-metallic pads, stainless steel brake lines, and titanium thermal shims is designed to provide improved braking response, heat management, pedal feedback, and consistency.
The kit is suitable for drivers looking for a balanced upgrade for daily driving, aggressive street use, autocross, and light track applications, while also providing the convenience of purchasing matched FactionFab components together.
