Description
Greater power gains are achieved with a larger high-performance intercooler. The Dinan dual core intercooler provides a 240% increase in face area along with an equally impressive increase in volume, substantially reducing the pressure drop to 0.8 psi, as well as providing for more efficient heat exchange and more consistent output power. Dinan's unique dual-core design allows 2 separate cores to be working in conjunction with one another at all times. This doubling of resources is directly responsible for a 60% improvement in the delta from charge air temperature to ambient temperature (see diagrams). "Cool down" time is also reduced, enabling the cars to produce full power under varying driving conditions such as stop and go traffic. This leaves the chances of being susceptible to heat soak nearly a thing of the past.
The system has been engineered to be as direct a replacement as possible to the stock unit, requiring only minor modifications for a clean, factory-like installation. The increased thermal efficiency provided by the Dinan dual core intercooler will also enhance turbocharger reliability in addition to overall power. On a stock vehicle, power gains can be had from 4000 RPM and beyond (when the car is in boost). In order to achieve the best performance, the intercooler should be paired with the Stage 3 DINANTRONICS Performance Tuner as it provides optimization of the intercooler. In particular, it extends the power band to be more robust and powerful from 5000 RPM to redline whereas without tuning the bulk of the gains are from 6000 RPM to redline.
Features:
- Max gains (N55 engine) of 15 HP and 13 lb-ft of torque @ 6250 RPM (greater gains and a wider power band can be achieved when paired with stage 3 DINANTRONICS)
- Max gains (N20/N26 engine) of 6 HP and 5 lb-ft of torque @ 5500 RPM (greater gains and a wider power band can be achieved when paired with stage 3 DINANTRONICS)
- Face area 240% larger than the stock intercooler setup for maximum cooling efficiency to deter heat soak
- Charge Air Pressure drop: 0.80 PSI (25% improvement over stock)
- Charge Air Temperature drop: 155º F (11% improvement over stock)
- Charge Air Temperature / Ambient Temperature Delta: 18º F @ 6250 RPM (60% improvement over stock)
Fitment:
- Not compatible with vehicles equipped with Active Cruise Control or the F23 / F33 chassis (convertibles)
- For F30 / F31 328i and 335i applications with M-Tech bumpers please review optional hardware kit D333-0025 for optimal appearance
About Dinan
Dinan knows European marques – quite literally – from the inside out. Whether you need hard parts such as exhaust systems or coilovers, or ECU upgrades to unlock your engine's potential, Dinan has the parts to take your BMW, Mercedes-Benz, or Mini to the next level.
SPECS
- Brand: Dinan
- Dinan Point Value: 2
- Emission Code: 1
- Height: 13 inches
- Labor Time (Hours): 4.5
- Length: 36 inches
- Max HP Gain: 15 @ 6250 RPM
- Max Torque (lb-ft) Gain: 13 @ 6250 RPM
- Product Type: Intercooler
- Sale Category: Engine
- Weight: 33 lbs
- Width: 19 inches
- UPC: 813725022895
- Part Number: D330-0021
EMISSIONS
This part is legal for sale and use on Emissions Controlled Vehicles, in all 50 states, when used in accordance with the manufacturer's application guide because it has a California Air Resources Board (CARB) Executive Order (EO) number. The following vehicles are considered Emissions Controlled Vehicles:
- 1966 and newer U.S. manufactured California Certified vehicles
- 1968 and newer U.S. manufactured Federally Certified vehicles
- 1968 and newer Foreign manufactured vehicles
