Description
Dinan's highly successful 3rd generation MINI intake has been tweaked and a new variant engineered that supports LCI models as well as 2020+ F48/F39 BMW X1/X2's!
Like its predecessor, the Dinan carbon fiber intake for the MINI/BMW transverse B46/B48 engines is an exercise in efficiency. Given a confined space with limited options and an even smaller budget, the goal was to create an intake that provides power, sound, and throttle response in an aesthetically pleasing package.
Through extensive flow bench testing, the biggest hindrance to improved flow on the stock intake was identified as the factory snorkel. Given the cost constraints, attention was turned to introducing a secondary inlet for additional airflow. Experiments showed that a 12 square-inch opening on the opposite side of the upper lid from the engine provided a perfect balance of additional volume without increasing turbo inlet temperatures. This setup improved throttle response and provided maximum gains of +12 WHP and +23 ft-lbs of torque in the low/mid-range.
Notably, the secondary air inlet allows the intake system to be more audible, enhancing the driving experience with noticeable turbo spool and BOV sounds. The system's carbon fiber construction ensures it looks as good as it performs. The result of an optimized lid, improved filter, and thorough testing yields an incredibly efficient and cost-effective solution that you will be hard-pressed to beat.
Features:
- Increased Power: Max gains of 12 WHP and 23 lb-ft of torque.
- Sportier Sound: Enjoyably louder and sportier intake sound.
- Improved Throttle Response: Enhanced response with additional airflow.
- Carbon Fiber Air Box Lid: Allows increased air volume for improved performance.
- Secondary Air Inlet: Bell-mouthed side inlet creates optimal flow characteristics without increasing intake air temperature.
- Easy Installation: Bolt-on installation for quick and straightforward setup.
Fitment:
- MINI:
- 2020-2024 MINI Cooper S
- 2020-2024 MINI Cooper JCW
- 2020-2024 MINI Clubman S
- 2020-2024 MINI Countryman S
- BMW:
- 2020-2022 BMW X1 28i (F48)
- 2020-2022 BMW X2 28i (F39)
Specifications:
- Brand: Dinan
- Dinan Point Value: 3
- Emission Code: 7
- Labor Time (Hours): 1
- Max HP Gain: 12 @ 3500 RPM
- Max Torque (lb-ft) Gain: 23 @ 2000 RPM
- Product Type: Cold Air Intake
- Warranty: Dinan Factory Matching (4yr/50k) Warranty
- UPC: 813725029795
- Part Number: D760-0057
Service Part:
- Dinan Replacement Filter for High Flow Carbon Fiber Intake: 2014-2021 BMW M3/M4 & 2015-2024 MINI Cooper (F39/F48/F54/F55/F56/F57/F60/F80/F82) - Part# D401-0022 - $67.60
Emissions: This part is legal under the provisions of EPA’s Tampering Policy dated November 23rd, 2020. The company has reasonable basis (test results) to verify that this product allows the vehicle to operate within legal emissions standards and is therefore legal for sale for on-street use in all states that accept the legal provisions of the Clean Air Act and the EPA Tampering Policy. This product is NOT LEGAL FOR SALE OR USE IN THE STATE OF CALIFORNIA. Testing with the California Air Resources Board, to achieve 50-state compliance, is pending with CARB. Once testing is complete and an E.O. number is issued, this product will be updated to 50-state legal status.
Compatibility Note: Please verify MAF housing before purchase. Not compatible with Pre-LCI MINI's (<2019/2020 MY with oval MAF sensor housing). If you have an oval MAF sensor housing use SKU D760-0051. Also not compatible with B48E MINI's (2020+ Countryman/Clubman JCW's).
