Description
The Comp Turbo CT6RX-88106 Triplex Ceramic Ball Bearing Oil-Less Air-Cooled Turbocharger is engineered for extreme horsepower applications, delivering 1000 to 2150 HP with uncompromised efficiency. Using Comp Turbo’s patented Triplex Ceramic oil-less air-cooled system, this turbo eliminates the need for oil and water lines, simplifying installation while improving durability and spool response.
Ideal for high-performance street, strip, and racing applications, the CT6RX-88106 features a lightweight billet aluminum center section, a 88mm CTRX billet aluminum ultra-slim hub compressor wheel, and a 106mm Inconel 713C high-flow 9-blade turbine wheel, capable of handling massive airflow and thermal loads.
This turbocharger supports horizontal and vertical mounting, is fully rebuildable and upgradeable, and comes with an integrated maintenance grease fitting to ensure long-lasting performance under extreme conditions.
Features
-
Patented Triplex Ceramic oil-less air-cooled ball bearing system
-
Eliminates oil and water lines
-
Designed for high-performance street and track use
-
Recommended engine bay installation for 1/8 mile to 1/2 mile racing
-
Street use recommended for mid-mount to remote-mount turbo systems
-
Lightweight billet aluminum center section
-
CTRX billet aluminum ultra-slim hub 7+7 compressor wheel, 88mm
-
Inconel 713C high-flow 9-blade turbine wheel, 106mm
-
Standard rotation configuration
-
Available in T6 & V-band inlet turbine housings
-
Fully rebuildable and upgradeable
-
Integrated maintenance grease fitting
-
Supports horizontal and vertical installation
Horsepower & Engine Specifications
-
Minimum horsepower: 1000 HP
-
Maximum horsepower: 2150 HP
-
Minimum engine displacement: 3.0L
-
Maximum engine displacement: 12.0L
Compressor Housing Specifications
-
Inlet size: 6 inches
-
Outlet size: 3.5 inches
-
A/R ratio: 0.88
-
Pressure port: 1/8 NPT
Compressor Wheel Specifications
-
Inducer diameter: 88 mm
-
Major diameter: 140 mm
Turbine Wheel Specifications
-
Turbine inducer diameter: 112 mm
-
Turbine exducer diameter: 106 mm
Fitment & Application Information
This turbocharger is universal and not vehicle-specific. Fitment depends on custom fabrication and turbo system design:
-
Compatible with engines producing 1000–2150 HP
-
Designed for engines with 3.0L to 12.0L displacement
-
Standard rotation configuration
-
Recommended engine bay installation for 1/8 mile to 1/2 mile racing
-
Street use recommended for mid-mount to remote-mount turbo systems
-
Supports horizontal and vertical mounting configurations
-
T6 or V-band inlet turbine housing required
-
Professional installation and custom tuning recommended
Recommended Service Interval
-
Normal street use: Apply 8 pumps of grease every 3,000 miles
-
Extreme street use: Apply 8 pumps of grease every 1,500 miles
-
Extreme drag racing use: Apply 8 pumps of grease prior to each race event
2-Year Warranty
All Comp Turbo turbochargers are backed by a 2-year warranty.
Warranty Coverage
-
Defects in materials and workmanship
-
Repair or replacement of the turbocharger during the warranty period at no additional cost
Warranty Terms
-
Valid for two years from the original purchase date
-
Applies only to turbochargers used with proper maintenance and operating guidelines
With this warranty, Comp Turbo reinforces its commitment to quality, reliability, and extreme performance.
To ensure the highest quality, Comp Turbo kits are built to order. Most orders will take 3-5 weeks to ship but some kits can take longer. Once you place your order, the order will not be cancellable for any reason.
