The modern Ford F-150 and Raptor have become serious performance platforms.

Turbocharged EcoBoost engines provide substantial power from the factory, but they also leave considerable room for improvement. Better airflow, charge-air cooling, exhaust flow, calibration, fueling, and supporting hardware can all contribute to a more capable truck.

Xodus Performance was developed around that opportunity.

The brand focuses on engineering performance upgrades specifically for Ford EcoBoost applications, with products covering the systems that matter most when building a faster, more responsive, and more capable F-150 or Raptor.

At XPH, the Xodus catalog includes performance tuning, cold-air intakes, intercoolers, exhaust systems, turbo adapters, ethanol hardware, suspension upgrades, and practical accessories for Ford truck platforms.

Built Around the EcoBoost Platform

EcoBoost engines are highly responsive to modifications because their turbocharged architecture allows changes in airflow, boost, cooling, and calibration to translate directly into performance.

But those systems are interconnected.

Increasing airflow without addressing charge-air temperatures can limit consistency. Increasing boost without adequate fueling or calibration can create additional demands on the engine. Increasing engine output without considering the transmission and chassis leaves part of the build behind.

Xodus approaches these upgrades as components of a larger performance system.

Performance Tuning for the F-150 and Raptor

One of the most significant areas of the Xodus lineup is ECU and performance tuning.

XPH carries Xodus tuning solutions for multiple Ford EcoBoost applications, including different generations of the F-150 and Raptor. Current offerings include Xodus tuning for the 2015–2020 F-150 2.7L and 3.5L EcoBoost, the 2017–2020 Raptor 3.5L EcoBoost, and the 2021–2023 third-generation Raptor 3.5L EcoBoost.

The tuning strategy is not limited to chasing a peak horsepower figure.

Depending on the application, Xodus calibrations can address areas such as:

• horsepower and torque
• throttle response
• boost management
• transmission behavior
• speed limiting
• engine operating parameters
• exhaust valve behavior
• fuel-quality adaptation

For the 2021–2023 Raptor, the Xodus Core Engine Tune can provide gains of up to 81 horsepower and 128 lb-ft of torque on 93-octane fuel, while supporting fuel from 87 to 93 octane through automatic fuel-quality adaptation.

Wireless POWERlink Tuning

Xodus tuning is designed to make the flashing process accessible without requiring permanent ECU modifications.

Supported products use the POWERlink wireless OBDII interface, allowing users to install calibrations through a compatible mobile application.

The system can also be used to:

• return the vehicle to its stock calibration
• monitor engine data
• record performance logs
• read diagnostic trouble codes
• clear diagnostic trouble codes
• check emissions readiness

That makes the tuning system useful beyond the initial installation.

Improving Airflow With the Xodus Cold Air Intake

The factory intake system can become a restriction as airflow requirements increase.

Xodus addresses this with its Cold Air Intake System for Ford F-150 and Raptor EcoBoost applications.

The system uses a true dual-intake design intended to provide balanced airflow to the engine's twin turbochargers. Oversized inverted-cone filters and optimized bell-mouth inlet geometry are used to increase available airflow while reducing restrictions.

The intake also uses rotomolded components and a tool-free pop-off airbox lid, combining performance-oriented airflow with practical serviceability.

F-150 and Raptor Intake Coverage

The current Xodus intake supports several Ford EcoBoost configurations.

Ford F-150

• 2015–2020 F-150 2.7L EcoBoost
• 2015–2020 F-150 3.5L EcoBoost
• 2021–2026 F-150 2.7L EcoBoost
• 2021–2026 F-150 3.5L EcoBoost

Ford F-150 Raptor

• 2017–2020 Raptor 3.5L EcoBoost
• 2021–2026 Raptor 3.5L EcoBoost

Exact fitment should always be confirmed according to model year and engine configuration.

Charge-Air Cooling With Xodus FDS

As boost pressure and engine output increase, managing intake air temperature becomes increasingly important.

The Xodus FDS Intercooler System is designed for 2015–2026 Ford F-150 and Raptor EcoBoost applications and uses a large 5" x 20" x 9.5" aluminum bar-and-plate core with approximately 950 cubic inches of core volume.

The FDS, or Flow Distribution System, is designed to distribute airflow across the intercooler core more effectively.

The system also incorporates:

• cast and CNC-machined aluminum end tanks
• TIG-welded construction
• Grip-Lock inlet and outlet connections
• durable black coating
• integrated condensation drains

Xodus states that testing has shown intake-air-temperature reductions of up to 15% compared with factory cooling systems.

Supporting High-Output EcoBoost Builds

The Xodus intercooler is designed to support applications ranging from stock trucks to builds producing up to approximately 950 horsepower.

That makes the system relevant beyond a basic bolt-on truck.

Whether the vehicle is being used for towing, off-road driving, spirited street use, or a high-output performance build, charge-air temperature control becomes increasingly important as the engine is pushed harder.

High-Flow Turbo Adapters

The turbocharger inlet is another area where airflow can become restrictive.

Xodus offers High-Flow Turbo Adapters for Ford F-150 and Raptor 3.5L EcoBoost applications.

These adapters are designed to improve the transition into the turbocharger system and complement other airflow upgrades such as the Xodus intake.

For enthusiasts building a more extensively modified EcoBoost, this provides another step in improving the intake tract rather than treating the airbox as the only restriction.

Exhaust Upgrades for EcoBoost Trucks

Engine airflow does not stop at the turbocharger.

The exhaust system also affects how efficiently the engine can move exhaust gases away from the turbochargers.

Xodus offers cat-back exhaust systems for Ford F-150 and Raptor EcoBoost applications.

For the 2015–2020 F-150 2.7L and 3.5L EcoBoost, the Xodus cat-back uses 304 stainless steel, mandrel-bent tubing, TIG-welded construction, and a 4.5-inch black powder-coated exhaust tip.

The system also incorporates Xodus Drone Trap resonator technology to reduce unwanted cabin drone during highway cruising.

That makes the exhaust suitable for a truck that needs to remain comfortable during normal driving while still providing a more aggressive sound under acceleration.

Raptor-Specific Exhaust Development

Xodus also offers a dedicated cat-back system for the 2017–2020 second-generation Ford Raptor.

The system uses a 3-inch dual-exhaust configuration with an integrated X-pipe and 304L stainless-steel construction.

The design incorporates:

• 3-inch dual exhaust tubing
• integrated X-pipe
• DroneTrap resonator
• reinforced resonator construction
• boxed stainless-steel hangers
• dual 5-inch satin-black exhaust tips

It is designed around the factory Raptor chassis and remains compatible with the factory skid plates and 35-inch spare tire.

Ethanol Capability

Fuel choice can become an important part of a high-performance EcoBoost build.

Xodus offers a TrueFlex Ethanol Harness Kit for 2017–2020 Ford Raptor EcoBoost applications.

The system provides the hardware needed to integrate ethanol-content information into a compatible performance setup, giving owners another option when moving beyond conventional pump-gas-only configurations.

For enthusiasts looking to extract more performance from the 3.5L EcoBoost, ethanol capability can become an important part of the overall fueling and calibration strategy.

Performance Beyond the Engine

A faster truck also needs a chassis capable of supporting the additional performance.

Xodus offers suspension-related upgrades such as its Suspension Leveling Kit for 2015–2026 Ford F-150 applications.

A leveling kit can change the truck's stance while also providing additional front-end clearance depending on the application.

This makes it useful for owners who want to combine performance modifications with changes to the truck's overall stance and capability.

Practical Accessories for the F-150 and Raptor

Not every Xodus product is designed to increase horsepower.

The brand also develops practical components for truck owners who use their vehicles in demanding environments.

One example is the Xodus Phone & Gear Dash Mount for 2015–2020 Ford F-150 and Raptor models.

The modular mount uses the Magpul M-LOK mounting system and is designed to accommodate devices such as phones, GPS units, radios, tablets, and cameras.

It is particularly suited to trucks used for off-road driving, overlanding, towing, and other situations where secure access to additional equipment is important.

A Performance Approach That Fits Real Trucks

One of the interesting aspects of the Xodus lineup is that it does not treat the Ford truck as a dedicated race vehicle.

The same F-150 or Raptor may be used for commuting during the week, towing on the weekend, and exploring off-road trails afterward.

That means performance upgrades need to work within a much broader range of conditions.

Xodus products reflect that requirement.

The catalog combines horsepower-oriented hardware with cooling improvements, exhaust refinement, fuel-system integration, chassis components, and practical truck accessories.

Building an EcoBoost Step by Step

An Xodus-equipped truck does not have to be built all at once.

A typical progression could begin with a cold-air intake to improve airflow and induction response.

The next step might be an intercooler to improve charge-air temperature control.

From there, owners can consider a performance calibration, turbo adapters, exhaust upgrades, or ethanol integration depending on their goals.

For more advanced builds, these components can be combined into a broader system designed around the desired power level and vehicle use.

The important point is that each upgrade should complement the others.

Xodus at XPH

Xodus brings a dedicated performance approach to some of Ford's most popular EcoBoost platforms.

At XPH, the lineup includes tuning solutions, cold-air intake systems, FDS intercoolers, turbo adapters, cat-back exhaust systems, ethanol hardware, suspension upgrades, and practical accessories for Ford F-150 and Raptor applications.

Whether the goal is sharper throttle response, more horsepower and torque, better charge-air temperature control, improved exhaust flow, or a more capable truck overall, Xodus provides components designed around the EcoBoost platform.

Explore Xodus Performance at XPH: https://x-ph.com/xodus/