The intercooler pipes on your Ram carry compressed air from the turbocharger to the intercooler, then back toward the engine. The boots seal the connections along the way. If you’re replacing a worn boot or refreshing the charge-air plumbing on your 6.7L Cummins, the S&B Intercooler Pipe and Boot Set, part number 83-1015, lets you address both sides of the system in one job.

Available at Extreme Power House for 2013–2018 Ram 2500 and 3500 trucks with the 6.7L Cummins diesel, the set pairs wider polished aluminum pipes with aramid-reinforced boots.

Replace the Hot-Side and Cold-Side Pipes Together

The hot-side pipe carries compressed air from the turbocharger to the intercooler. The cold-side pipe carries that air toward the engine after it passes through the intercooler. S&B includes replacements for both factory pipes, so you can refresh the plumbing on either side of the intercooler with a single set.

S&B uses wider polished aluminum charge-air cooler (CAC) pipes designed to reduce restrictions in the factory plumbing. The set makes sense for owners who want to address the airflow path while replacing aging pipes and boots. It also gives you the opportunity to inspect both sides of the system while the original piping is out.

Shop the S&B 83-1015 Intercooler Pipe and Boot Set at XPH

Reinforced Boots for the Charge-Air Connections

The boots are the flexible connections between sections of the charge-air system. When a boot starts leaking, compressed air can escape before it reaches the engine. Replacing the pipes is a good opportunity to address those connections as part of the same job.

S&B supplies aramid-reinforced boots designed for better durability than the factory boots. If a worn connection is what put intercooler piping on your parts list, the reinforced boots are a central reason to consider this set. Follow S&B’s installation instructions for pipe positioning and boot placement so the components seat as intended.

A Polished Finish Under the Hood

The polished aluminum gives the piping a brighter appearance in the engine bay. If you’ve already added an intake or other underhood upgrades, it’s a finish you can factor into the look of the build. The pipe and boot set covers both sides of the intercooler, giving the visible charge-air plumbing a consistent finish.

Fitment for the 6.7L Cummins

S&B part number 83-1015 fits the following applications:

• 2013–2018 Ram 2500 with the 6.7L Cummins diesel
• 2013–2018 Ram 3500 with the 6.7L Cummins diesel

Confirm your truck’s model year and engine when ordering. Refer to the manufacturer’s installation instructions for the procedure and the product listing for emissions and California Proposition 65 information.

Shop S&B for Your Ram at Extreme Power House

If your next service includes intercooler piping or boots, the 83-1015 gives you a way to replace both factory pipes and their connections at the same time. Check the fitment for your Ram and see the kit details before planning the installation.

Explore the S&B Intercooler Pipe and Boot Set for the 2013–2018 Ram 6.7L Cummins