null

REMUS at XPH: The Details Behind a Finished Exhaust Build

28th Oct 2026

An exhaust upgrade brings several decisions together. There is the sound you hear from the driver’s seat, the hardware fitted beneath the car, and the tailpipes that become part of its rear profile. When those details work together, the finished upgrade feels like a natural extension of the build.

That is what makes the REMUS catalog worth exploring carefully. Alongside exhaust systems, the range includes tailpipe sets, connecting tubes, and application-specific components that help define the final configuration.

At Extreme Power House, the REMUS lineup includes products for BMW, Volkswagen, Toyota, Porsche, and other supported applications. It offers several ways to approach an exhaust project, whether your priority is a different rear appearance, a more expressive exhaust note, or an application that integrates with existing valve controls.

Start by picturing the completed car. Then work through the details that will get it there.

Give the Tailpipes a Place in Your Styling Plan

Exhaust tips occupy a small area of the car, but they can make a strong impression. Their diameter, finish, and shape influence how the lower bumper looks, especially alongside a diffuser or other exterior changes.

Before choosing a finish, consider the parts already on your vehicle. Bright metallic tips can create contrast against a dark diffuser. Carbon details can complement other carbon exterior pieces. A darker finish can tie in with black trim and wheels.

The shape deserves attention too. An angled opening presents a different profile from a straight-cut design. The amount of visible tip and its position within the bumper opening also affect the final appearance.

Treat product photos as a starting point. Check the actual tip option, its dimensions, and its compatibility with the exhaust you are ordering. A photograph showing one configuration does not establish what every option includes.

BMW F80 M3 and F82 M4: Several Ways to Finish the Rear

The REMUS M3/M4 listing at XPH illustrates how much choice can exist within one application. Its F8x system description includes four tip styles: 102 mm angled chrome, 102 mm angled carbon with titanium internals, and 98 mm Street Race designs in stainless or black chrome with carbon inserts.

The listing also describes a valved rear section that works with the vehicle’s Sport and Sport+ settings, with valve operation influenced by engine speed and the chosen driving mode.

For an F80 or F82 owner, that creates two connected decisions: the rear appearance and the exhaust configuration beneath it.

Take time to compare the tip designs against your bumper and diffuser. If you are planning additional exterior changes, include them in that comparison. Choosing the exhaust and rear styling together can help the completed car look deliberate from every angle.

Volkswagen Golf R Mk8: Build the Complete Combination

The REMUS Golf R Mk8 Sport listing is a useful example of why the options on a product page matter. XPH identifies this application for the Golf 8 R 4Motion, Type CD, with a gasoline particulate filter, or GPF.

The listing calls for connection tube 046513 0000 and outlet tube set 950020 9999. It describes four outlet tubes, two incorporating valves, and provides choices for tailpipes, the connection tube, and the outlet set. Installation requires cutting the original exhaust, while rear skirt modifications are not required according to the listing.

This makes the configuration process an essential part of the purchase. Review the complete combination, including every required component, before comparing the total with another system.

Also confirm the vehicle’s market specification and emissions equipment. A product described for a GPF-equipped Golf R should be checked against the exact car being upgraded.

Toyota GR Supra: Factory Actuator Integration

XPH’s REMUS Toyota Supra Race listing describes a centered axle-back system for the GR Supra, Type JTSC, with one integrated valve. That valve uses the original actuator and the vehicle’s onboard electronics.

The description specifies a 115 mm tailpipe on each side and 70 mm tubing. It also states that the original exhaust must be cut, with no rear skirt modifications required.

Those details help turn an exhaust idea into an installation plan. The actuator arrangement explains how the new hardware connects with the car, while the cutting requirement tells you what the installation involves.

When reviewing this application, verify the exact vehicle compatibility and the chosen tip package. Read the Race product’s intended-use notes as part of that review. The product name, configuration, and installation requirements should all be considered together.

Porsche 718: Check the Starting Equipment

Porsche applications show another important distinction: the exhaust equipment already on the car.

XPH lists a REMUS axle-back for the 718 Boxster, Type 982, without the factory Sport Exhaust. The catalog includes a rear-section listing marked as requiring tailpipes, alongside configurations naming chrome or carbon tailpipe sets.

For a buyer, those are meaningful differences. One listing may be a component that needs additional parts; another may identify a particular combination. The factory Sport Exhaust specification is also part of the application, so the model name alone is not enough to establish compatibility.

Record your car’s existing equipment before comparing packages. Then review the included parts and the required additions. That gives you a clearer picture of both the finished appearance and the complete purchase.

Understand What Valve Integration Means for Your Application

Valve hardware deserves its own place in the comparison. Look for information about the actuators, how the valves are controlled, and whether the system works through the vehicle’s existing electronics.

REMUS descriptions vary by application. For example, XPH’s Audi R8 racing exhaust listing describes vacuum-controlled valves operated through the onboard electronics. It also states that cutting the original exhaust is not required for that application.

That differs from the installation details described for the Supra and Golf R examples. Use the instructions for the exact system you are considering when planning the work.

For sound comparisons, look for recordings that identify the vehicle, exhaust configuration, and other installed hardware. Clips showing different operating conditions can help you understand more of the system’s character.

Bring the Details Together Before Ordering

A clear parts plan makes an exhaust project easier to organize. Keep these points together while browsing:

  • Vehicle details: Model year, chassis, engine, drivetrain, and factory exhaust equipment.
  • System configuration: The rear section, connecting components, and other parts required for the chosen package.
  • Valve arrangement: Included hardware, reused actuators, and control method.
  • Tailpipe choice: Finish, diameter, shape, and compatibility with the rear bumper.
  • Installation requirements: Cutting, supplied hardware, and any additional components identified in the instructions.

Review the complete configured price after choosing the required options. This gives you a useful basis for comparing systems and planning installation.

Explore REMUS at Extreme Power House

The most satisfying exhaust projects begin with a clear picture of the finished vehicle. Sound, appearance, and hardware all deserve a place in that picture.

REMUS gives enthusiasts opportunities to personalize those details across a range of applications. From the tip choices on an F8x BMW to the component combinations on a Golf R, the catalog rewards a closer look at how each system comes together.

Brand link: https://x-ph.com/brands/Remus.html