MST Intake for BMW F97 X3 M & F98 X4 M S58 | X-PH
14th Oct 2026
The BMW X3 M and X4 M combine the practicality of an SUV with the performance potential of BMW M's S58 3.0L twin-turbocharged inline-six.
That makes both platforms especially attractive to enthusiasts who want serious power without giving up everyday usability.
For owners looking to improve airflow, sharpen throttle response, and bring more of the S58's turbocharged character into the cabin, Extreme Power House is excited to offer the MST Performance Cold Air Intake System for the BMW F97 X3 M and F98 X4 M.
Designed specifically around the S58 platform, this intake replaces the factory intake path with a more performance-focused system using aerodynamically engineered intake tubes, large 152 mm reusable filters, shortened airflow routing, and semi-open aluminum heat shields.
The goal is simple: help the S58 breathe more efficiently while giving the driver a more responsive and engaging experience.

Built Specifically for the S58-Powered X3 M and X4 M
The S58 is one of BMW M's most capable modern engines.
Its twin-turbocharged architecture provides strong factory performance while also leaving substantial room for aftermarket upgrades.
That makes the intake system an important part of any performance build.
Before the turbos can compress air, they first have to draw that air through the intake tract.
Any unnecessary restriction on the inlet side can work against airflow efficiency.
MST developed this system specifically for the F97 X3 M and F98 X4 M, creating a direct-fit intake designed around the available engine-bay space and the airflow requirements of the S58.
Rather than adapting a universal intake to fit, the MST system is shaped around these BMW M applications from the start.
Shortened Intake Path for Better Response
One of the major design goals of the MST system is to shorten the path incoming air has to travel before reaching the turbochargers.
A more direct route can help improve airflow response and reduce unnecessary complexity in the intake tract.
MST's shortened design is intended to support:
- Improved throttle response
- Faster airflow delivery
- More direct turbo inlet feeding
- Reduced intake restriction
For a twin-turbo engine like the S58, improving the inlet path can help the engine respond more quickly to throttle input.
This is especially appealing to drivers who want the car to feel sharper without making major mechanical changes.
Aerodynamically Engineered Intake Tubes
The intake tubes themselves are a major part of the system.
MST uses molded intake tubes designed around airflow efficiency, with shapes intended to improve both air volume and velocity.
Smooth internal transitions help reduce turbulence and allow air to travel toward the turbochargers more efficiently.
On a high-performance turbocharged engine, the shape of the intake path matters.
The goal is not simply to install larger tubing, but to create a route that supports cleaner, more efficient airflow from the filter toward the turbo inlets.
That engineering focus is one of the reasons this intake is more than just a visual engine-bay upgrade.
Large 152 mm High-Flow Air Filters
The system uses 152 mm reusable high-flow air filters positioned close to the turbochargers.
The large filter size provides substantial surface area for incoming air, helping support the higher airflow requirements of the S58.
Positioning the filters close to the turbos also keeps the airflow path short and direct.
That layout works together with the molded intake tubes to create a more efficient overall system.
The filters are reusable and designed to be serviced rather than discarded.
MST recommends:
- Cleaning every 20,000 km
- Replacement every 60,000 km
Following the proper maintenance schedule helps preserve both filtration quality and airflow performance over time.
Semi-Open Aluminum Heat Shields
Engine-bay heat is always a concern with performance intakes.
MST addresses this by using custom semi-open aluminum heat shields around the intake filters.
The shields are designed to help reduce exposure to heat generated within the engine compartment while still allowing the intake to benefit from increased airflow.
This semi-open design aims to balance two priorities:
Airflow.
And heat management.
Rather than fully enclosing the filters, MST leaves the system more open while still providing thermal separation from surrounding engine-bay components.
More Turbo Sound From the S58
One of the most immediately noticeable changes after installing a performance intake is often sound.
The factory intake system is designed to keep induction noise relatively subdued.
MST's more open, high-flow design allows more of the S58's natural turbocharger sound to come through.
That means more audible:
- Turbo spool
- Induction noise
- Airflow sounds under acceleration
- Turbocharger character during throttle transitions
For many X3 M and X4 M owners, this is a major part of the appeal.
The S58 is already an exciting engine, but the factory intake keeps much of its mechanical personality quiet.
A more open intake lets the driver hear more of what the engine is doing.
Improved Throttle Response
Because the system shortens the intake path and is designed for improved airflow efficiency, MST also targets better throttle response.
When the driver requests power, the turbos need to draw in air quickly.
Reducing unnecessary restriction and shortening the path can help the engine react more immediately to throttle input.
The difference is especially valuable in a performance SUV, where responsiveness contributes directly to how sharp and engaging the vehicle feels.
Rather than changing the engine's basic character, the intake is designed to make that character feel more immediate.
No ECU Remapping Required
One of the biggest advantages of the MST system is that it is designed as a direct-fit bolt-on upgrade.
No ECU remapping is required for installation.
That makes it a practical choice for owners who want better airflow and sound without immediately committing to software tuning.
The intake can be installed on an otherwise stock vehicle, while also fitting naturally into a broader performance build.
For customers planning future tuning, exhaust, intercooler, or turbo-related upgrades, the MST intake can serve as an early supporting modification.
Works for Standard and Competition Models
The system supports both standard and Competition versions of the X3 M and X4 M.
That gives the intake broad coverage across the F97 and F98 chassis.
BMW X3 M Fitment
- 2020–2024 BMW X3 M F97
- 2020–2024 BMW X3 M Competition F97
BMW X4 M Fitment
- 2020–2025 BMW X4 M F98
- 2020–2025 BMW X4 M Competition F98
All listed applications use the S58 3.0L twin-turbocharged engine.
This broad compatibility makes the system useful for a wide range of X3 M and X4 M owners looking for the same airflow and sound upgrade.
A Strong First Modification for the S58 Platform
Not every performance build needs to begin with major tuning.
An intake is often one of the best first upgrades because it improves the part of the system responsible for feeding air into the engine.
For a stock vehicle, the MST intake can add:
- More turbo sound
- Better airflow potential
- Sharper throttle response
- A more aggressive engine-bay appearance
For a tuned vehicle, the freer-flowing intake path becomes part of the supporting hardware needed as airflow demand increases.
That makes the MST system useful at multiple stages of a build.
A Good Match for Tuned X3 M and X4 M Builds
The S58 platform has tremendous tuning potential.
As boost and power levels rise, airflow requirements also increase.
A high-flow intake becomes increasingly important as the engine demands more air.
The MST system's large filters, aerodynamic tubes, and shortened layout are designed with that in mind.
Owners planning ECU tuning or other performance upgrades can use the intake as part of a larger package that may eventually include:
- ECU calibration
- Upgraded intercooling
- Exhaust upgrades
- Turbo inlet upgrades
- Downpipes
- Fueling upgrades
- Turbocharger upgrades
The intake doesn't need to be the final modification.
It can be one of the building blocks that supports a more complete S58 setup.
Direct-Fit Installation
MST designed the system as a direct-fit upgrade for the F97 and F98 platforms.
That means the intake is intended to install without extensive fabrication or permanent modification to the vehicle.
This makes the upgrade more accessible and keeps the installation process relatively straightforward compared with more complex engine modifications.
Professional installation is still recommended for customers who want the best possible fit and alignment.
Reusable Filter Maintenance
The included high-flow filters are designed for repeated use.
MST recommends cleaning the filters every 20,000 km and replacing them every 60,000 km.
Maintenance intervals may vary depending on driving conditions.
Vehicles exposed to heavy dust, dirt, or off-road conditions may require more frequent inspection.
Keeping the filters properly maintained is important for both airflow performance and filtration quality.
Important Emissions Notice
The MST Performance intake and inlet products are not CARB compliant.
They are intended for off-road and racing use only on unregistered vehicles where required by law.
Customers should always check local, state, and federal regulations before purchase or installation.
Legal requirements vary by location, so it is the owner's responsibility to confirm whether the system is permitted for their intended use.
Key Features of the MST F97/F98 S58 Intake
The MST Performance Cold Air Intake System includes:
- Designed for the BMW F97 X3 M and F98 X4 M
- Compatible with the S58 3.0L twin-turbo engine
- Fits standard and Competition models
- Custom semi-open aluminum heat shields
- Shortened intake path
- Aerodynamically engineered molded intake tubes
- Designed to improve airflow volume and velocity
- Large 152 mm reusable high-flow air filters
- Filters positioned close to the turbochargers
- Enhanced turbo induction sound
- Designed to improve throttle response
- Direct-fit installation
- No ECU remapping required
- Reusable filter design
- Recommended filter cleaning every 20,000 km
- Recommended filter replacement every 60,000 km
Vehicle Fitment
BMW X3 M F97
- 2020 BMW X3 M
- 2021 BMW X3 M
- 2022 BMW X3 M
- 2023 BMW X3 M
- 2024 BMW X3 M
BMW X3 M Competition F97
- 2020–2024 BMW X3 M Competition
BMW X4 M F98
- 2020 BMW X4 M
- 2021 BMW X4 M
- 2022 BMW X4 M
- 2023 BMW X4 M
- 2024 BMW X4 M
- 2025 BMW X4 M
BMW X4 M Competition F98
-
2020–2025 BMW X4 M Competition
All supported vehicles are equipped with the S58 3.0L twin-turbocharged inline-six.
Who Is This Intake For?
The MST Cold Air Intake is a strong option for X3 M and X4 M owners who want:
- More aggressive turbo sound
- Improved airflow potential
- Sharper throttle response
- A direct-fit bolt-on upgrade
- No immediate ECU remapping requirement
- Reusable high-flow filters
- Supporting airflow hardware for future tuning
It works equally well as an early modification on a mostly stock vehicle or as part of a more extensive S58 performance build.
Upgrade Your BMW X3 M or X4 M at Extreme Power House
The BMW X3 M and X4 M already offer an impressive combination of practicality and performance.
The MST Performance Cold Air Intake System is designed to make the S58 feel and sound even more engaging.
With its shortened intake path, molded high-flow tubes, 152 mm reusable filters, semi-open aluminum heat shields, and direct-fit design, the system gives owners a straightforward way to improve airflow and bring more turbo character into the driving experience.
Whether you are keeping your X3 M or X4 M mostly stock or preparing for more aggressive tuning, improving the intake system is a logical step in building a stronger S58 setup.
The MST F97 X3 M / F98 X4 M S58 Cold Air Intake System is available now at Extreme Power House.
Shop the MST Performance Cold Air Intake System: https://x-ph.com/mst-f97-x3m-f98-x4m-s58-3-0-cold-air-intake-system-bw-x3m01/?showHidden=true