MSS Suspension: Urban, Sports, Track & Hybrid Kits | XPH
12th Nov 2026
A set of wheels can change the look of a car before you touch the suspension. Then you notice the space above the tires, how high the front sits compared with the rear, or how much clearance you have on the ramp into your garage. The right ride height has to work from all those angles. It should suit the wheels you chose and the roads you actually drive.
MSS gives you a way to make that decision with a height-adjustable spring kit. At Extreme Power House, the MSS catalog includes Urban, Sports, Track and Hybrid options across several platforms. A BMW X5 M owner may want to close the wheel gap while keeping enough room for loaded trips. A GR Supra owner might be dialing in a new wheel setup. An Audi RS3 owner may be deciding how much of the build to devote to track use. Those are different projects, and each has a different starting point in the range.

What you're adjusting with an MSS spring kit
An MSS height-adjustable spring kit lets you set ride height within the range specified for the application. The springs and height adjusters are the focus of the upgrade. On kits designed for compatible factory dampers, the original shocks or struts stay in the setup. Check the exact listing for damper compatibility, especially if your car has factory adaptive suspension or if a previous owner changed the dampers.
The spring layout can vary by axle and kit. The Supra Sports kit, for example, lists a single front spring and a dual-stacked rear arrangement. The Audi 8Y Track listing specifies a dual stack at both ends. That difference is one reason to shop by part number and intended use instead of assuming every MSS kit has the same hardware or behaves the same way.
Urban: Set up a BMW M SUV for everyday use
The MSS Urban kit for BMW F95 X5 M and F96 X6 M, part 05aBMWX56MSU, is listed for select 2020-2024 models, including Competition applications. XPH lists a front and rear adjustment range from 0 to 30 mm of lowering, with a stated tolerance of ±3 mm.
For an SUV that sees regular use, start with how it looks and sits on its current wheels, then think about what you carry. An unloaded side photo can help you decide how much gap you want to close. Passengers, luggage and steep ramps tell you how much clearance you want to keep. If the vehicle already has wider tires or spacers, have your shop check that setup before choosing the final height. It's easier to agree on a sensible starting point when the installer knows how the SUV is used.
Sports: Give the GR Supra or Z4 the stance you pictured
The MSS Sports kit for Toyota GR Supra and BMW Z4, part 02aTOYGRSUP, is listed for select 2020-2025 GR Supra and G29 Z4 applications. XPH lists up to 35 mm of front lowering and 30 mm at the rear, both with a stated tolerance of ±3 mm. Review the exact engine and trim in the fitment list before ordering.
On a Supra or Z4, a small change in ride height can have a noticeable effect on the way the body sits over the wheels. If you're adding a front lip later, include that in the conversation now. A setting that looks right with the factory bumper may leave less clearance than you want once the lip is on. The available adjustment gives you room to choose a height around the build you have planned.
Track: Compare the two MSS choices for Audi 8Y
XPH lists both a Sports kit and a Track kit for select Audi A3, S3 and RS3 8Y applications. The part numbers are 02aAUDA38Y and 03aAUDA38Y, respectively. The Track listing includes select 2022-2024 S3 and RS3 fitments, with separate model-year and trim entries for the A3.
Both listings show an adjustment range of up to 30 mm of lowering with a stated tolerance of ±3 mm, so the lowering figure alone won't explain the choice. The Track version is the circuit-oriented option. If the car spends most of its time commuting with only a few track days a year, compare both kits with the shop that will set it up. Give them the tire sizes and an honest picture of how the car will be driven. That makes the discussion about how the car needs to work instead of which name sounds more appealing.
Hybrid: A dedicated option for the G80 M3
The MSS Hybrid Adjustable Ride System for the BMW G80 M3, part 07aBMWMG80SN, is listed for select 2021-2024 G80 M3 models. XPH describes a single front spring, dual-stacked rear springs, and compatibility with the original adaptive dampers for the listed applications. The front and rear adjustment ranges are listed as 0 to 30 mm of lowering, with a stated tolerance of ±3 mm.
This is a useful example if keeping the M3's factory dampers is part of the plan. Confirm the exact trim and damper configuration first, then discuss a height that suits the tires, wheel offset and any aero you've fitted. Ask your installer to check clearance and alignment at the chosen height before calling the setup finished.
Check the details before placing your order
Take a side photo and note the wheel and tire sizes, any spacers, and the suspension currently installed. Add your year, chassis and trim, then compare that information with the kit's fitment notes. Give your installer a target height and tell them where you need to keep clearance. The listed range describes what the kit offers; your starting height and the equipment on the car help determine the setting you choose.
Review the purchase terms on the specific product page, too. The featured XPH listings identify these kits as clearance items and state that they come without support, warranty or returns. Confirm fitment and the installer's plan before ordering.
Shop MSS Suspension at Extreme Power House to compare adjustable spring kits and find the option that fits your vehicle and the way you drive it.