null

Kline Inconel Side Pipes for Porsche 718 GT4 RS | X-PH

28th Oct 2026

The Porsche 718 Cayman GT4 RS is already one of the most intense naturally aspirated cars Porsche has built.

Its flat-six engine, high-RPM character, lightweight chassis, and motorsport-focused engineering make the GT4 RS a car where every component contributes to the overall experience.

For owners looking to take the exhaust system further, Extreme Power House is excited to offer the Kline Innovation Inconel Side Pipes for the Porsche 718 GT4 RS and Spyder RS.

Built from F1-grade Inconel 625, the Kline system is engineered around three major goals:

Lower weight.

Improved exhaust flow.

And a more exotic, higher-pitched flat-six soundtrack.

The system can be integrated into a broader Kline exhaust package incorporating an Inconel X-pipe, Valvetronic rear silencer architecture, optional OPF replacement components, and either 100-cell HJS motorsport catalysts or decat configurations.

Built for Porsche’s High-Revving Flat-Six

The 718 GT4 RS was never designed to be subtle.

Its naturally aspirated flat-six engine is a major part of the car’s identity, and modifying the exhaust has a direct effect on how that engine communicates with the driver.

Unlike a turbocharged platform, there are no turbochargers upstream acting as additional acoustic barriers.

That makes exhaust design particularly important.

Kline approaches the GT4 RS system with an emphasis on preserving the naturally aspirated character while creating a sharper, more exotic sound as the engine climbs through the rev range.

The lightweight Inconel construction and carefully selected tubing dimensions are intended to support both airflow and acoustic performance.

F1-Grade Inconel 625 Construction

The defining material in this system is Inconel 625.

Inconel is a nickel-based superalloy used in demanding environments where heat resistance, strength, and low material thickness are important.

Kline describes the system as using F1-grade Inconel 625, placing the focus firmly on motorsport-inspired construction rather than conventional stainless steel exhaust fabrication.

For an exhaust system, the material offers several advantages.

It can withstand extreme temperatures.

It allows thin-wall construction.

And it can significantly reduce weight compared with heavier factory exhaust components.

For a car already engineered around reducing unnecessary mass, that makes Inconel a natural fit.

Weight Reduction Where It Matters

The factory GT4 RS exhaust system has to satisfy a wide range of requirements, including noise regulations, durability targets, and emissions equipment.

That can result in substantial exhaust components.

Kline takes a different approach.

The company replaces heavier factory components with lightweight Inconel sections designed around performance.

According to the current specifications, the Kline rear silencer section weighs approximately 7.9 kg, while the Inconel catalyst manifolds weigh approximately 3.2 kg each.

The exact total weight savings depend on the complete configuration selected.

Still, reducing exhaust mass is especially attractive on a car like the GT4 RS, where weight is already a central part of the vehicle’s engineering philosophy.

More Than Weight Savings

An exhaust component should not be judged purely by how much lighter it is.

Flow matters too.

Kline uses carefully selected pipe diameters and cross sections throughout the system in an effort to preserve the balance between torque and peak power.

The goal is not simply to install the largest tubing possible.

Larger is not automatically better.

An exhaust needs sufficient cross-sectional area to reduce restriction while still maintaining appropriate gas velocity and overall engine response.

Kline specifically states that its tubing dimensions were selected around that balance.

63.5 mm X-Pipe Architecture

The Kline GT4 RS exhaust architecture uses a 63.5 mm X-pipe section.

An X-pipe allows exhaust pulses from the two sides of the engine to interact.

On a naturally aspirated flat-six engine, that interaction can significantly change the tone and frequency of the exhaust note.

The result is intended to produce a more exotic, higher-pitched character compared with the heavier and more restrictive factory arrangement.

This is one reason Kline’s system is aimed at more than simply adding volume.

The routing itself is designed to influence the sound.

A Higher-Pitched, More Exotic Porsche Sound

Kline specifically targets a sharper and more exotic exhaust character for the GT4 RS and Spyder RS.

The combination of lightweight Inconel silencers, revised crossover design, and less restrictive exhaust routing allows more of the flat-six engine’s mechanical character to reach the driver.

At higher RPM, that becomes especially significant.

The GT4 RS engine is designed to reward revs, so an exhaust that becomes progressively more expressive as engine speed rises fits the character of the car particularly well.

Designed to Work With Kline’s Valvetronic Rear System

The broader Kline GT4 RS exhaust architecture can incorporate the company’s Valvetronic rear system.

This provides two distinct exhaust personalities.

With the valves closed, the system offers a quieter and more restrained exhaust character.

With the valves open, the exhaust path becomes substantially more aggressive and unrestricted.

That flexibility is especially useful on a car that may see both road and track use.

Maximum sound can be available when desired without forcing the car to operate at that volume continuously.

Fully Bypassable Inconel Silencers

The Kline Valvetronic architecture uses fully bypassable Inconel silencers.

When the valves route exhaust through the silenced path, the system can reduce volume for more controlled operation.

When the bypass path is opened, the exhaust takes a more direct route.

This allows the exhaust behavior to change substantially without changing hardware.

For a road-driven GT4 RS or Spyder RS, that gives the driver much more flexibility than a permanently open exhaust system.

OPF Replacement Options

On OPF-equipped applications, the original gasoline particulate filter can create substantial exhaust restriction and also influence sound.

Kline offers an exhaust configuration that replaces the original OPF with a specially designed silencer.

The goal is to reduce restriction while also helping control the exhaust drone that can sometimes accompany OPF removal.

This is an important distinction.

Simply removing an emissions or filtering component can produce undesirable acoustic results.

Kline’s approach incorporates a replacement silencing component intended to manage the resulting sound more deliberately.

Optional 100-Cell HJS Motorsport Catalysts

For customers building a more complete system, Kline also offers 100-cell HJS motorsport catalytic converter options.

High-flow catalysts reduce restriction compared with more restrictive factory catalytic converters while retaining a catalyst in the exhaust path.

These can be combined with the rest of the Kline exhaust architecture for owners seeking a more performance-focused configuration.

Local emissions and road-use regulations should always be checked before changing catalytic converters or OPF equipment.

Decat Configuration for Motorsport-Oriented Builds

Kline also offers decat pipe options for the GT4 RS exhaust system.

Removing the catalytic converters further reduces exhaust restriction, but this configuration is not appropriate or legal for road use in many jurisdictions.

Decat systems should therefore be treated as competition or off-road components where permitted.

Customers should always confirm local emissions regulations before ordering or installing this configuration.

Up to 20 Horsepower With the Appropriate Full Configuration

Kline states that replacing the factory catalytic converters with 100-cell HJS motorsport catalysts or decat pipes, combined with appropriate correction of the resulting air/fuel ratios, can produce gains of up to 20 horsepower depending on the complete setup and calibration.

That performance figure should be understood carefully.

It is not a claim that the Inconel side pipes alone add 20 horsepower.

The published gain depends on:

  • Catalyst or decat configuration
  • Correct air/fuel ratio adjustment
  • Engine calibration
  • Complete exhaust setup
  • Vehicle condition

This distinction is especially important when comparing individual exhaust components.

Exhaust Calibration Still Matters

Changing major exhaust restrictions can affect engine behavior.

When catalytic converters or OPF components are changed, the vehicle may require appropriate calibration work to maintain the intended air/fuel behavior.

Kline explicitly ties its potential 20-horsepower figure to corrected A/F ratios.

That means a more aggressive exhaust configuration should be treated as part of a complete vehicle setup rather than simply bolted on with the assumption that maximum performance gains will appear automatically.

Optimized Pipe Diameters

Kline’s published technical specifications include:

  • X-pipe diameter: 63.5 mm
  • Silencer transit diameter: 50 mm
  • Catalyst pipe diameter: 63.5 mm
  • Catalyst overall cross section: 122 mm
  • Manifold primary diameter: 45 mm
  • Manifold secondary diameter: 63.5 mm

These dimensions are selected to maintain an appropriate balance between exhaust flow, torque, and power.

Rather than using one diameter throughout the entire system, Kline adjusts cross-sectional area according to the role of each exhaust section.

Optional Pre-Preg Carbon Fiber Exhaust Tips

A premium exhaust should look appropriate on the car as well as sound right.

Kline offers optional F1-grade pre-preg carbon fiber exhaust tips for the system.

The carbon construction complements the extensive lightweight materials already used throughout the GT4 RS and adds another motorsport-inspired element to the rear of the car.

For owners building a visually cohesive carbon-heavy GT4 RS, the optional tips provide a natural finishing touch.

Designed for the 718 Cayman GT4 RS

The primary application is the 2022+ Porsche 718 Cayman GT4 RS.

This is a vehicle-specific exhaust application developed around the packaging and performance requirements of the GT4 RS platform.

The product should not automatically be assumed compatible with a standard Cayman GT4, GTS 4.0, or other 718 model simply because those vehicles use naturally aspirated flat-six engines.

Kline offers different exhaust products for those applications.

Porsche 718 Spyder RS Compatibility

The current XPH product information also lists compatibility with the 2022+ Porsche Spyder RS.

As always, the exact vehicle configuration and exhaust setup should be confirmed before ordering, particularly when combining the side pipes with optional manifolds, catalysts, OPF replacement components, or the Valvetronic rear section.

A Modular Approach to the GT4 RS Exhaust

One of the strongest aspects of Kline’s GT4 RS offering is that the exhaust can be developed in stages.

Depending on the owner’s goals, a complete setup may eventually include:

  • Inconel side pipes
  • Inconel Valvetronic rear system
  • Inconel X-pipe
  • OPF replacement silencers
  • 100-cell HJS motorsport catalysts
  • Decat pipes
  • Inconel manifolds
  • Carbon fiber exhaust tips

This gives owners the ability to choose how far they want to take the system.

A street-oriented car may retain more of the original emissions equipment.

A dedicated track build may take a much more aggressive approach.

Build Around Sound or Performance

Not every GT4 RS owner has the same goal.

Some customers are mainly looking for more sound.

Others want to reduce weight.

Some want a complete high-flow exhaust for a modified vehicle.

The Kline system can support each of those directions depending on which components are selected.

That makes the Inconel side pipes particularly useful as part of a modular build.

They are not simply a decorative replacement.

They become part of a larger exhaust architecture designed specifically around the GT4 RS and Spyder RS.

Why Inconel Suits the GT4 RS

The 718 GT4 RS is already a car built around motorsport principles.

Carbon fiber.

Lightweight glass.

Aggressive aerodynamics.

A high-revving naturally aspirated engine.

In that context, an Inconel exhaust makes sense.

The material is expensive and difficult to manufacture compared with ordinary stainless steel, but its combination of heat resistance, strength, and weight reduction makes it highly attractive for serious performance applications.

On a GT4 RS, it feels less like an exotic material added for marketing purposes and more like an extension of the car’s original engineering philosophy.

Important Emissions Considerations

The availability of OPF replacement components, high-flow catalysts, and decat pipes means customers need to pay close attention to local regulations.

Modifying or removing factory emissions equipment may be prohibited for street vehicles.

The legality of the final configuration depends on:

  • Country
  • State or regional regulations
  • Vehicle registration type
  • Exhaust configuration
  • Intended use

Always confirm local requirements before changing factory catalytic converters or particulate filters.

Professional Installation Recommended

A premium Inconel system on a GT4 RS should be installed carefully.

Professional installation is recommended, particularly when combining several Kline components.

The installer should verify:

  • Exhaust alignment
  • Mounting points
  • Heat clearance
  • Valve operation where applicable
  • Catalyst or OPF configuration
  • Exhaust-tip alignment
  • Sensor installation
  • Exhaust sealing

The more comprehensive the system becomes, the more important correct installation and calibration become.

Kline 718 GT4 RS Inconel Exhaust Highlights

The Kline GT4 RS architecture offers several key features:

  • F1-grade Inconel 625 construction
  • Developed for the Porsche 718 Cayman GT4 RS and Spyder RS
  • Lightweight exhaust design
  • 63.5 mm X-pipe architecture
  • Designed for improved exhaust flow
  • Higher-pitched, exotic flat-six sound character
  • Compatible with Kline Valvetronic rear exhaust architecture
  • Fully bypassable Inconel silencers
  • Optional OPF replacement silencer
  • Optional 100-cell HJS motorsport catalysts
  • Optional decat configuration
  • Optional pre-preg carbon fiber exhaust tips
  • Carefully selected pipe diameters for torque and power balance
  • Potential gains of up to 20 horsepower with the appropriate catalyst/decat configuration and corrected A/F ratios

Kline’s current technical information lists the rear silencer section at 7.9 kg, with Inconel catalyst manifolds at 3.2 kg each.

Made-to-Order Lead Time

The current XPH listing notes a 5–6 week lead time for a pair of side pipes.

Because these are specialized performance exhaust components rather than mass-market replacement parts, customers should take that production time into account when planning an installation or larger exhaust build.

Who Is This Upgrade For?

The Kline Innovation Inconel system is especially appealing to GT4 RS and Spyder RS owners who want:

  • More exotic exhaust sound
  • Increased high-RPM character
  • Reduced exhaust weight
  • Premium Inconel construction
  • Improved exhaust-flow potential
  • A modular exhaust upgrade path
  • Valved sound control when paired with the appropriate rear system
  • High-flow catalyst or motorsport exhaust options
  • A system suited to a serious performance-focused Porsche build

For those owners, Kline offers much more than a simple muffler replacement.

Upgrade Your Porsche 718 GT4 RS at Extreme Power House

The Porsche 718 Cayman GT4 RS already feels remarkably close to a road-legal competition car.

The Kline Innovation Inconel Side Pipes take that motorsport philosophy into the exhaust system.

With F1-grade Inconel 625 construction, optimized tubing dimensions, modular integration with Kline’s Valvetronic rear system, optional high-flow catalysts or decat configurations, and an emphasis on reducing weight while sharpening the flat-six soundtrack, the system is designed for owners who want more from one of Porsche’s most focused modern platforms.

Whether your goal is a lighter exhaust, a more exotic sound, or the foundation for a complete high-flow Kline system, the Inconel side pipes provide a premium starting point.

The Kline Innovation Inconel Side Pipes for the Porsche 718 GT4 RS and Spyder RS are available now at Extreme Power House.

Shop the Kline Innovation Inconel Side Pipes:
https://x-ph.com/kline-innovation-side-pipes-inconel-porsche-718-gt4rs-2022-kl-por-718gt4rs-sp-inc/