Borla: Make the Rear View Part of the Upgrade
10th Nov 2026
Walk toward your car from behind, and the exhaust becomes part of its first impression. The tips frame the lower bumper. Their shape and finish add another detail to the design. Then you start the engine, and the upgrade takes on a second dimension.
That combination makes choosing an exhaust a personal part of building a car. You can consider how the system looks while parked and how you want it to sound when the drive begins.
The Borla selection at Extreme Power House offers several ways to approach that decision. From vehicle-specific rear sections to components for a custom exhaust project, there are options for owners who want to put more thought into the finished result.

Bring the appearance and sound together
When planning an exhaust upgrade, picture the complete rear of the vehicle. Consider the bumper, diffuser, existing trim, and the finish you want the tips to complement.
A bright finish can draw attention to the outlets and give them a prominent place in the design. A black finish can work with darker exterior details. The right choice depends on the appearance you want to create and the options available for your application.
The same consideration applies to sound. Borla describes S-Type as an aggressive but balanced option, with a muscular character under throttle and a more restrained presence at cruise. ATAK is positioned as the brand's highest-volume sound level. Availability depends on the particular vehicle and system.
Those descriptions give you a starting point. Listen to recordings of the exact application whenever possible, and consider how closely the recorded car matches your own exhaust configuration.
A bright finish for the Mustang V6
XPH lists the Borla S-Type rear-section exhaust under part number bor11796. Borla identifies this system for the 2011–2014 Ford Mustang with the 3.7L V6, covering automatic and manual transmissions in rear-wheel-drive coupe and convertible configurations.
For an owner refining this generation of Mustang, it offers a specific starting point for an exhaust project. The axle-back arrangement focuses the purchase on the rear section, while the S-Type designation establishes the intended sound character.
Borla specifies 2.25-inch piping and a single 4.5-inch round, bright chrome tip on each muffler assembly. The system uses T-304 stainless steel construction.
That makes the visual side of the purchase easy to consider alongside the sound. Look at the tip style, compare it with your rear bumper, and decide how it fits the rest of the car's appearance.
Use the part number and engine information when checking compatibility. The 11796 example discussed here is a V6 application, so owners of other Mustang versions should select the appropriate listing for their vehicle.
Black quad tips for the C7 Corvette Z06
For a different approach, XPH lists the Borla ATAK axle-back system with black quad tips under part number bor11903CB.
Borla confirms this part for the 2015–2019 Chevrolet Corvette Z06 with the 6.2L V8 and either automatic or manual transmission. The system has NPP valves and does not have AFM valves, making valve configuration an essential part of the selection.
The quad outlets give this upgrade a strong visual role at the rear of the Corvette. XPH describes the tips as high-temperature ceramic-coated T-304 stainless steel, with T-304 construction also used for the exhaust system.
Combined with the ATAK sound designation, this is an option to investigate when you want a more assertive exhaust character and a darker tip finish.
Before ordering, check the vehicle's equipment and the full application notes. Matching the model, transmission where applicable, and valve arrangement helps ensure you are comparing the correct system.
Borla components for a custom project
Some exhaust projects involve selecting individual components with a fabricator. XPH's Borla range includes universal parts for that approach, including the 2.5-inch Universal X-Pipe listed as bor621104.
The listing specifies 2.5-inch inlets and outlets, a 27.63-inch overall length, and T-304 stainless steel construction. It also states that clamps are not included.
A component like this gives a custom project a concrete part to evaluate. Your installer can compare its dimensions and connection layout with the intended routing, available space, and other components.
Universal parts require that planning. Confirm the measurements and installation method with the person building the system before purchasing. Bring the final outlet position and tip appearance into the discussion early, so the fabrication follows the result you want.
Choose around the complete car
An exhaust purchase feels more considered when every detail follows the same direction. Start with the exact vehicle application, then decide which system type suits the scope of the project.
Listen for the character you enjoy during acceleration and consider the driving you do most often. Review the tip finish as part of the exterior design. Finally, check the installation requirements against the equipment already on the vehicle.
This gives you a clear reason for each selection, from the sound level to the visible finish.
Explore the Borla selection at Extreme Power House to find vehicle-specific exhaust systems and components for your next project. Choose the details that make you look back at the car after parking—and look forward to starting it again.