null

Alpha-N G87 M2 Carbon Fiber Side Skirts AN-0769 | XPH

11th Nov 2026

The BMW G87 M2’s wide fenders get most of the attention, but the rocker panels determine how those two wheel arches look together. The Alpha-N Carbon Fiber Full Replacement Side Skirts (AN-0769) give the lower body a more pronounced line between the wheels. At the front of each skirt, an integrated air channel adds a sculpted detail just behind the front wheel, where it’s especially visible from a three-quarter angle.

Available at Extreme Power House, the kit fits the 2023–2026 BMW G87 M2 Coupe. Alpha-N manufactures the panels in Germany from Italian prepreg carbon fiber, finishes them in gloss clear coat, and supplies the front and rear mounting brackets with the pair.

What a Full Replacement Changes on the G87 M2

With the AN-0769 kit, the original BMW rocker panel assemblies come off and the Alpha-N panels take their place. The carbon fiber forms the visible rocker surface along each side of the car. An add-on extension leaves the original panel in place and adds another piece below or over it. That difference matters when you’re deciding how much of the factory profile you want to keep and how much carbon you want to see.

Look at the M2 from directly beside it and you can see how the skirt connects the front and rear arches. Move toward the front corner and the channel gives the leading edge more shape. From the rear, the longer carbon surface carries the eye forward from the rear wheel. If you’re comparing styling options from photos, look for a full side shot as well as close-ups. The side shot shows how the skirt changes the proportions of the whole car, while the close-ups show the shape of the channel and the detail of the weave.

How the Skirts Work with a Front Lip or Rear Diffuser

If your M2 already has a carbon fiber front lip, the skirts continue that finish along the lower body. A rear diffuser can pick it up again behind the rear wheels. Together, the three pieces carry the carbon finish around the lower edge of the car.

The skirts also work as a standalone change. On a car with factory bumpers, the dark carbon adds definition below the doors while the rest of the exterior keeps its original shape. On lighter paint, the contrast makes the entire rocker line stand out. On darker paint, the weave and reflections in the gloss finish tend to draw more attention as you get closer.

If you already have exterior carbon on the car, compare the finish and weave before ordering. A front lip, skirt, and diffuser sit far enough apart that they can each have a different shape, but the way their surfaces reflect light is visible when you see all three together.

Italian Prepreg Carbon Fiber and a Gloss Finish

Alpha-N makes these panels in Germany using Italian prepreg carbon fiber and precision aluminum tooling. Prepreg is carbon fiber supplied with resin already in the material before it’s molded. Here, the construction gives Alpha-N a way to form the long rocker panel and the smaller contours around the front channel in the same carbon fiber piece.

The visible 2×2 twill weave gives the skirts their diagonal pattern. On a long panel like this, the standard gloss clear coat brings out the weave as light moves from the flatter section below the door to the sculpted area near the front wheel. Both panels arrive clear coated and ready for installation. Alpha-N also offers a matte clear finish by special request if you’re matching other matte carbon pieces.

What Comes in the Kit and How It Installs

The AN-0769 kit includes the left and right carbon fiber replacement side skirts and 3D-printed front and rear mounting brackets. The brackets support the replacement panel installation at the ends of the rocker assemblies.

Professional installation is recommended. Ask your installer to review the fit of both panels along the door sills and where they meet the front and rear wheel arches. Those transitions are easy to see from the side, and checking them on both sides helps the finished car look even.

If your M2 is lowered, or you’re planning to install a front lip at the same time, discuss the car’s current ride height and how you use it with your installer. That gives you a chance to review clearance around steep driveways and garage entrances as part of the overall exterior setup.

Fitment and Ordering

The Alpha-N AN-0769 fits the 2023–2026 BMW G87 M2 Coupe. Confirm the part number when ordering, especially if you’re comparing these panels with extensions designed for the same chassis. If the standard gloss finish suits the rest of your build, the kit arrives finished and includes both sides and their mounting brackets. For a matte finish, request it before placing your order.

Shop the Alpha-N G87 M2 Carbon Fiber Full Replacement Side Skirts at XPH