null

Active Autowerke Black Friday Sale | Up to 30% Off at XPH

13th Nov 2026

The Active Autowerke Black Friday Sale is live at Extreme Power House (XPH), with up to 30% off. Explore BMW exhaust upgrades for the G80 M3, G82 M4, G87 M2, F87 M2 Competition, F80 M3, F82 M4, M240i, M340i, and M440i. XPH carries single and equal-length midpipes as well as valved axle-back systems, so you can shop for the section that makes sense for your build.

Start with the sound you want to change. A midpipe changes the routing between the front and rear portions of the exhaust. An axle-back changes the rear section, where the muffler and tips sit. If you already like the way your BMW sounds at cruising speed but want a different tone under load, compare recordings of the individual upgrade before committing to several exhaust changes at once.

BMW G80 M3 and G82 M4 | Signature Single and Gen 2 Equal-Length Midpipes

For the G80 M3 sedan and G82 M4 coupe, XPH lists the Active Autowerke Signature Single Mid-Pipe with a brace included. It uses 304 stainless steel, and Active Autowerke describes its sound as deeper than its equal-length X-pipe design. XPH lists this single midpipe as part of the Motorsport Collection for race and off-road use only.

The Gen 2 Signature Equal Length Mid-Pipe gives G80 and G82 owners another option. Its routing is designed to balance the lengths of the two exhaust paths, and Active Autowerke added resonators to the Gen 2 design to tame rasp and reduce the buzz some drivers hear around 2,000 RPM. If that part of the rev range is what you’re looking to change, listen to a clip under light load as the engine passes through it. A wide-open-throttle clip will tell you more about the tone higher in the rev range.

When you compare the two designs, look for recordings from cars with similar rear mufflers and valve positions. Those details can make a difference in how much of the change you hear from the midpipe itself.

BMW G87 M2 | Valved Axle-Back or Signature Single Midpipe

For the BMW G87 M2, XPH lists a chassis-specific Active Autowerke Valved Rear Axle-Back Exhaust. The 304 stainless steel system reuses the BMW valve actuators and is designed to work with the stock midpipe. It’s an option if you want to change the rear exhaust note while keeping factory valve control. The listing has a tip selector, so you can compare how the available finishes look against your diffuser.

XPH also lists a Signature Single Mid-Pipe with G87 Brace for the 2023-and-newer G87 M2. The part is designed for a deeper tone and is listed for race and off-road use only. If you’re shopping for the M2, start with the G87 product page and confirm how the part connects to the exhaust hardware on your car. 

BMW F80 M3 and F82 M4 | S55 Single Midpipe

For the F80 M3 and F82 M4, Active Autowerke offers an S55 Single MidPipe with an included F-brace. The design uses a 3.5-inch oval section to help preserve ground clearance while routing the exhaust through a single pipe. If your F80 or F82 is lowered, compare the installed pipe’s position against the bracing and underbody when planning the job.

A clip recorded on an S55 car with the same rear muffler as yours will give you a better starting point for judging the sound. Pay attention to the transition from low RPM to the midrange, where the change may be more apparent than it is at idle.

BMW F87 M2 Competition and M2 CS | Valved Axle-Back and Connecting Pipes

For the 2019–2021 F87 M2 Competition and 2020–2021 F87 M2 CS, XPH lists Active Autowerke’s Valved Rear Axle-Back. It uses 304 stainless steel and reuses the factory valve actuators, so you retain BMW’s valve control. If you’re shopping by the F87 chassis code, check your trim as well. This listing covers the S55-powered Competition and CS.

If your F87 already has an Active Autowerke equal-length midpipe, check what connecting pipes are installed before ordering the rear section. XPH lists resonated connecting pipes for the M2 Competition and CS equipped with that midpipe. The axle-back listing also notes that some combinations with a resonated midpipe may need double-resonated connecting pipes to reduce rasp. Give your installer the part numbers for the pieces you already have so they can confirm the combination

BMW M340i and M440i | Valved Rear Axle-Back With Quad Tips

The Active Autowerke G2X Valved Rear Axle-Back is listed for the BMW M340i and M440i. It uses 304 stainless steel, reuses the factory valve actuators, and adds quad tips at the rear bumper. It gives B58 owners a way to change both the sound and the look of the rear section in one upgrade.

If you plan to keep the stock midpipes, the product listing calls for cutting them during installation and states that the connecting hardware is included. Confirm your exact chassis and model year and review the installation details before booking shop time.

BMW G42 M240i | A Chassis-Specific Quad-Tip Axle-Back

The 2022-and-newer G42 M240i has its own Active Autowerke Valved Rear Axle-Back. It uses 304 stainless steel, retains the factory valve actuator, and adds quad tips. Use the G42 product page to compare tip options. If you’re also changing the rear diffuser, confirm that its openings suit the tip configuration you choose. 

BMW F97 X3 M and F98 X4 M | Valved Rear Exhaust

For the F97 X3 M and F98 X4 M, Active Autowerke offers a valved rear axle-back that reuses the BMW valve actuators. XPH lists a version for owners keeping their factory midpipes. The listing describes the rear section on its own as a subtler sound change than the setup paired with Active Autowerke’s midpipe. If cabin sound matters on longer trips, compare in-cabin recordings at a steady speed alongside cold starts and acceleration clips. 

Shop the Active Autowerke Black Friday Sale at XPH

Browse the lineup by BMW chassis, compare the exhaust sections available for your car, and check current pricing for the configuration you want. The Active Autowerke Black Friday Sale is live at XPH with up to 30% off.

Shop the Active Autowerke Black Friday Sale at XPH