3 New aFe POWER Truck Airflow Upgrades | Silverado, Sierra & F-150 | X-PH
28th Oct 2026
Turbocharged trucks depend on one thing before boost can even begin:
Airflow.
From the air filter to the intake tube and ultimately the turbocharger inlet, every part of the incoming air path can influence how efficiently the engine breathes.
For owners looking to improve that side of their truck’s performance, Extreme Power House has added three new aFe POWER airflow upgrades covering Chevrolet Silverado, GMC Sierra, and Ford F-150 applications.
The latest additions include:
- aFe POWER Momentum GT Cold Air Intake with Pro 5R Filter for 2019–2026 Chevrolet Silverado 1500 and GMC Sierra 1500 2.7L Turbo
- aFe POWER Momentum GT Cold Air Intake with Pro DRY S Filter for 2019–2026 Chevrolet Silverado 1500 and GMC Sierra 1500 2.7L Turbo
- aFe POWER Turbo Inlet Pipe Kit for the 2024–2026 Ford F-150 2.7L EcoBoost twin-turbo V6
The two GM systems give owners a choice between a maximum-performance oiled cotton-gauze filter and a low-maintenance oil-free synthetic filter, while sharing the same overall Momentum GT approach of a sealed housing, oversized filter, and optimized intake routing. aFe reports up to 25 hp and 30 lb-ft with the Pro 5R configuration and up to 18 hp and 23 lb-ft with the Pro DRY S configuration.
The Ford upgrade takes a different approach, replacing the factory turbo inlet pipes with CAD-designed XLPE tubes and reinforced silicone couplers intended to reduce restriction immediately before the turbochargers.

aFe Momentum GT Cold Air Intake With Pro 5R Filter for Silverado & Sierra 2.7L Turbo
The first new addition is the aFe POWER Momentum GT Cold Air Intake System with Pro 5R Filter, part number 50-70042R-1.
Designed for the 2019–2026 Chevrolet Silverado 1500 and GMC Sierra 1500 equipped with the 2.7L turbocharged inline-four, this intake replaces the factory airbox and intake tract with a high-flow system engineered around increased airflow and performance.
According to aFe, the Pro 5R version produces dyno-tested gains of up to:
+25 horsepower
and
+30 lb-ft of torque
while flowing 12% more air than the factory intake system.
280 CFM of Measured Airflow
aFe lists measured airflow of 280 CFM at 7 inches of water for the Pro 5R configuration.
That figure provides another way to understand the purpose of the upgrade.
Instead of focusing solely on the horsepower result, the system is engineered to physically move more air than the stock intake.
For a turbocharged 2.7L engine, reducing restriction before the turbocharger can support stronger airflow as engine demand increases.
Large 9-Inch Pro 5R Filter
At the heart of the intake is a large 9-inch-tall, 360-degree radial-flow filter with a 5.5-inch flange.
The Pro 5R uses five layers of progressively finer cotton-gauze media.
It is pre-oiled, washable, and reusable.
This filter type is designed for customers who prioritize maximum airflow and performance.
Its large physical dimensions provide substantial filtration area, while the inverted filter top increases usable surface area further.
More filter area means incoming air has more media through which it can pass.
Five-Layer Cotton Gauze Construction
The five-layer Pro 5R media differentiates this system from the Pro DRY S version.
The progressively layered cotton gauze is intended to balance filtration with high airflow.
For performance-focused street trucks, this makes the Pro 5R the more aggressive filter option of the two.
It does require filter oil as part of its service process, but the filter can be cleaned and reused rather than discarded.
Sealed Momentum GT Housing
Rather than leaving the filter completely exposed inside the engine bay, the Momentum GT uses a sealed intake housing.
The housing helps isolate the filter while creating a cleaner, more factory-inspired engine-bay appearance.
aFe also incorporates a clear inspection window, allowing owners to check the condition of the filter without first removing the entire airbox lid.
That is a small feature that becomes useful every time the filter needs to be inspected.
Uses the Factory Air Inlet
The Momentum GT system retains compatibility with the truck’s factory air inlet.
This allows it to continue drawing incoming air through the vehicle’s original front-end ducting rather than relying exclusively on engine-bay air.
aFe also incorporates an optional auxiliary air inlet for owners who want additional airflow into the housing.
That gives the system flexibility while maintaining the factory air path.
Computer-Designed Intake Tube
The intake tube is designed using computer modeling to optimize both airflow and fitment.
Rather than simply replacing the original pipe with a larger universal tube, the Momentum GT routing is shaped around the Silverado and Sierra engine bay.
This helps create smoother airflow while maintaining the necessary clearance around surrounding components.
Fewer Components, Cleaner Installation
aFe also designed the Momentum GT around a relatively low component count.
Reducing the number of individual pieces can simplify assembly and reduce the number of connections that need to be installed and checked.
Stainless-steel clamps and a reinforced silicone coupler help provide secure connections throughout the system.
Pro 5R Fitment
The Pro 5R Momentum GT is designed for:
Chevrolet Silverado 1500
2019–2026 Chevrolet Silverado 1500
Engine: 2.7L Turbocharged Inline-Four
GMC Sierra 1500
2019–2026 GMC Sierra 1500
Engine: 2.7L Turbocharged Inline-Four
Exact model year, trim, and engine configuration should be confirmed before ordering.
Shop the aFe Momentum GT Pro 5R Intake:
https://x-ph.com/afe-momentum-gt-cold-air-intake-system-w-pro-5r-filter-gm-silverado-sierra-1500-19-26-l4-2-7l-t-afe50-70042r-1/

aFe Momentum GT Cold Air Intake With Pro DRY S Filter
The second system uses almost the same Momentum GT intake architecture but changes one important component:
The filter.
The aFe Momentum GT with Pro DRY S Filter, Part Number 50-70042D-1, is designed for the same 2019–2026 Silverado and Sierra 2.7L Turbo applications, but uses a three-layer oil-free synthetic filter instead of the five-layer oiled cotton-gauze design.
That makes this version especially appealing to customers who want improved airflow with simpler filter maintenance.
Up to 18 HP and 23 LB-FT
According to aFe’s dyno testing, the Pro DRY S version can provide gains of up to:
+18 horsepower
and
+23 lb-ft of torque.
aFe also states that the system outflows the factory intake by 10%.
The maximum published gains are slightly lower than those of the Pro 5R version, but the DRY S filter trades some maximum airflow potential for easier maintenance and oil-free operation.
275 CFM of Airflow
aFe lists the Pro DRY S version at 275 CFM at 7 inches of water.
For comparison, the Pro 5R system is listed at 280 CFM.
That makes the performance difference relatively easy to understand:
The two systems share the same basic intake philosophy, but the filter media shifts the balance slightly between maximum airflow and maintenance convenience.
Three-Layer Synthetic Filter Media
The Pro DRY S uses three layers of synthetic filter material.
Unlike the Pro 5R, it requires no filter oil.
This makes servicing more straightforward.
Clean the filter according to aFe’s maintenance recommendations, allow it to dry properly, and reinstall it without going through a separate oiling process.
For a daily-driven truck, that may be the deciding factor.
Well Suited to Street and Light Off-Road Use
aFe describes the Pro DRY S filter as well suited to street driving and light off-road use.
Its synthetic media is designed around filtration efficiency and dust-holding capacity while still supporting increased airflow.
That makes it an attractive option for owners whose trucks regularly encounter dusty roads or light trail conditions but who do not want the additional maintenance associated with an oiled filter.
Same Oversized 9-Inch Filter Format
Although the media changes, the overall filter remains substantial.
The Pro DRY S version also uses a:
- 9-inch-tall filter
- 360-degree radial-flow design
- 5.5-inch flange
- Inverted filter top
The inverted top increases usable filtration area, while expanded metal helps protect the filter media against impact.
Sealed Housing and Clear Sight Window
Like the Pro 5R system, the DRY S version uses a sealed Momentum GT housing with a clear inspection window.
The filter can therefore be visually checked without unnecessary airbox disassembly.
This gives both systems the same clean underhood appearance while keeping filter maintenance relatively convenient.
Two-Piece Roto-Molded Intake Tube
The Pro DRY S system uses a two-piece, computer-designed roto-molded intake tube.
The tube is manufactured from heat-resistant cross-linked polyethylene, or XLPE, giving it a durable structure suited to the temperatures found inside the engine bay.
The routing is designed specifically around the GM 2.7L turbo application.
Factory and Auxiliary Air Inlets
Like the Pro 5R version, this intake uses the factory air inlet and also provides an optional auxiliary opening.
Owners can therefore keep the housing fully configured around the factory feed or open the additional inlet where appropriate.
Pro DRY S Fitment
The system is designed for:
Chevrolet Silverado 1500
2019–2026 Chevrolet Silverado 1500
2.7L Turbocharged Inline-Four
GMC Sierra 1500
2019–2026 GMC Sierra 1500
2.7L Turbocharged Inline-Four
Shop the aFe Momentum GT Pro DRY S Intake:
https://x-ph.com/afe-momentum-gt-cold-air-intake-system-w-pro-dry-s-filter-gm-silverado-sierra-1500-19-26-l4-2-7l-t-afe50-70042d-1/
Pro 5R or Pro DRY S: Which One Should You Choose?
Because the two GM intakes are otherwise closely related, the decision largely comes down to what the customer wants from the filter.
Choose the Pro 5R If Maximum Performance Is the Priority
The Pro 5R version provides:
- Five layers of cotton-gauze media
- Pre-oiled construction
- 280 CFM measured airflow
- 12% more airflow than factory
- Up to 25 hp and 30 lb-ft of aFe-reported gains
- Washable and reusable design
For customers focused primarily on extracting the strongest airflow and published performance results from the Momentum GT system, this is the more performance-oriented choice.
Choose the Pro DRY S If Maintenance Convenience Is the Priority
The Pro DRY S provides:
- Three-layer synthetic media
- No filter oil required
- 275 CFM measured airflow
- 10% more airflow than factory
- Up to 18 hp and 23 lb-ft of aFe-reported gains
- Washable and reusable design
- Strong suitability for street and light off-road use
For customers who want an easier cleaning process and no oiling requirement, the DRY S is the logical choice.
Same Truck, Different Priorities
Neither system is simply “better” for every customer.
The Pro 5R prioritizes maximum airflow.
The Pro DRY S prioritizes maintenance convenience and oil-free filtration.
Both retain the core Momentum GT design and both represent substantial upgrades from the original airbox.

aFe POWER Turbo Inlet Pipes for 2024–2026 Ford F-150 2.7L EcoBoost
The third product moves from GM’s turbocharged inline-four to Ford’s 2.7L EcoBoost twin-turbo V6.
The aFe POWER Turbo Inlet Pipe Kit, Part Number 55-20005, is designed for the 2024–2026 Ford F-150 and replaces the factory turbo inlet pipes with a smoother, less restrictive airflow path between the intake system and the turbochargers.
Unlike the Momentum GT systems, this is not a complete cold-air intake.
It targets a different part of the airflow path:
The section immediately feeding the turbochargers.
Why Turbo Inlets Matter
The intake can only flow as efficiently as the path downstream allows.
Even with a higher-flowing airbox installed, restrictive turbo inlet piping can still limit how easily air reaches the compressor inlets.
aFe designed this kit to improve that final section before the turbos by replacing the factory pieces with smoother, optimized tubing.
This can make the inlet kit particularly useful as a supporting modification on trucks that already have, or eventually will receive, an upgraded intake.
CAD-Designed XLPE Construction
The new inlet pipes are developed using computer-aided design to optimize routing and fitment.
They are constructed from cross-linked polyethylene (XLPE), a lightweight polymer chosen for its resistance to heat and impact.
That gives the system durability without introducing unnecessary metal mass into the intake tract.
Smoother Internal Transitions
Airflow is affected by more than the diameter of a pipe.
Abrupt transitions and irregular internal surfaces can create turbulence.
aFe specifically designed the turbo inlet transitions to reduce restriction and provide a smoother path into the turbochargers.
For a twin-turbo engine, that means both turbochargers receive dedicated inlet paths engineered around efficient airflow.
Reinforced Silicone Turbo Couplers
At the turbo connections, aFe uses compression-molded silicone couplers.
These couplers incorporate external ribs designed to help them maintain their shape under vacuum.
Inside, the coupling surfaces remain smooth to help reduce turbulence.
This is an important detail because an inlet component that deforms under suction could undermine the airflow improvements the rest of the system is intended to provide.
Stainless-Steel SmartSeal Clamps
The kit includes stainless-steel SmartSeal clamps intended to maintain secure, leak-resistant connections throughout the inlet system.
Reliable sealing is essential on the inlet side of a turbocharger.
Unwanted air leaks can affect airflow behavior and overall system operation.
Works With the Factory Intake
Owners do not need an aftermarket cold-air intake to install the aFe turbo inlet kit.
The system is compatible with the factory F-150 intake.
That makes it a useful standalone upgrade for customers who want to improve the turbo inlet path while keeping the original airbox.
Also Compatible With aFe POWER Intake Systems
The same kit is also compatible with all applicable aFe POWER air intake systems.
This gives F-150 owners a natural staged upgrade path.
Start with the turbo inlet pipes.
Add an aFe intake later.
Or install both as part of a more comprehensive airflow package.
Developed Through Multiple Prototypes
aFe states that its engineers evaluated multiple 3D-printed prototypes while developing the system.
The final design was then tested on the vehicle under different real-world driving conditions to verify fitment, routing, clearance, and operation.
That vehicle-specific development helps distinguish the system from generic inlet tubing.
Direct-Fit Installation
Required fittings come pre-installed on the turbo inlet pipes, and the system retains factory connections.
No permanent vehicle modifications are required.
Because of the location of the F-150’s turbochargers, aFe estimates installation at approximately two hours for an experienced technician.
Professional installation is a sensible choice for owners who are not familiar with accessing the turbo inlet area.
F-150 Fitment
The aFe Turbo Inlet Pipe Kit is designed for:
2024–2026 Ford F-150
Engine: 2.7L EcoBoost Twin-Turbo V6
Compatibility should not be assumed for the 3.5L EcoBoost simply because it is another twin-turbo F-150 engine. aFe offers different inlet components for other engine applications.
Shop the aFe POWER F-150 Turbo Inlet Pipes:
https://x-ph.com/afe-power-turbo-inlet-pipe-black-ford-f-150-24-26-v6-2-7l-tt-afe55-20005/
Three Upgrades With the Same Goal: Let the Turbos Breathe
Although these products serve two completely different truck platforms, all three address the same basic challenge.
Reducing restriction before the turbocharger.
For the Silverado and Sierra, aFe replaces the complete factory intake with an oversized filter, sealed Momentum GT airbox, and optimized intake tube.
For the F-150, aFe concentrates specifically on the final inlet section between the air intake and the twin turbochargers.
That means the ideal upgrade depends on the truck.
For the GM 2.7L Turbo
Choose between the Pro 5R and Pro DRY S Momentum GT systems based on the type of filter you prefer.
The Pro 5R prioritizes airflow and maximum published performance.
The Pro DRY S gives up a small amount of measured airflow in exchange for an oil-free filter and easier maintenance.
For the Ford 2.7L EcoBoost
The turbo inlet kit is less about replacing the complete intake and more about improving the path directly into the turbochargers.
It can be used with either the stock airbox or an aFe intake, making it particularly useful as a supporting modification.
Important Emissions Notice
All three current XPH listings state that the products are not currently CARB-exempt.
They are therefore not available for purchase in California or for use on vehicles registered with the California DMV under the stated product conditions.
Customers should confirm local emissions requirements before ordering or installation.
Upgrade Your Truck’s Airflow at Extreme Power House
Turbochargers can only compress the air they receive.
That makes the intake side of the system a logical place to start when improving a turbocharged truck.
For 2019–2026 Silverado and Sierra 1500 2.7L Turbo owners, the aFe Momentum GT gives customers two distinct filter strategies within the same high-flow intake architecture.
Choose the Pro 5R for maximum airflow, five-layer oiled cotton media, and aFe-reported gains of up to 25 hp and 30 lb-ft.
Choose the Pro DRY S for oil-free maintenance, three-layer synthetic filtration, and aFe-reported gains of up to 18 hp and 23 lb-ft.
For 2024–2026 Ford F-150 2.7L EcoBoost owners, the aFe Turbo Inlet Pipe Kit tackles the airflow path from the intake directly into the turbochargers with CAD-designed XLPE piping, reinforced silicone transitions, SmartSeal clamps, and compatibility with both stock and aFe intake systems.
Different trucks.
Different components.
The same objective:
Give the turbocharger a cleaner, less restrictive path to the air it needs.
Shop the Latest aFe POWER Upgrades at Extreme Power House
aFe Momentum GT Cold Air Intake With Pro 5R Filter – Silverado/Sierra 1500 2.7L Turbo
https://x-ph.com/afe-momentum-gt-cold-air-intake-system-w-pro-5r-filter-gm-silverado-sierra-1500-19-26-l4-2-7l-t-afe50-70042r-1/
aFe Momentum GT Cold Air Intake With Pro DRY S Filter – Silverado/Sierra 1500 2.7L Turbo
https://x-ph.com/afe-momentum-gt-cold-air-intake-system-w-pro-dry-s-filter-gm-silverado-sierra-1500-19-26-l4-2-7l-t-afe50-70042d-1/
aFe POWER Turbo Inlet Pipe Kit – 2024–2026 Ford F-150 2.7L EcoBoost
https://x-ph.com/afe-power-turbo-inlet-pipe-black-ford-f-150-24-26-v6-2-7l-tt-afe55-20005/