Description
Disclaimer: Contact support@x-ph.com to reserve your place with a 10% deposit. The remaining balance is due when the product is ready to ship.
The Yonristic Performance VANTA GOLD™ EVO Exhaust System brings an evolution of the brand's flagship exhaust architecture to the BMW G80 M3 and G82 M4. Designed specifically around the S58 platform, EVO combines a full dual 3-inch exhaust layout, enlarged AURUM FLOW CORE™, two integrated resonators, and a redesigned X-pipe valved axle-back.
The system is engineered for enthusiasts seeking increased exhaust-flow capacity for higher-output builds while maintaining a refined and exotic S58 exhaust character. Compared with the original VANTA GOLD configuration, EVO uses larger 3-inch piping and delivers a slightly deeper, fuller tone with greater control over low-RPM metallic rasp.
The equal-length routing and proprietary AURUM FLOW CORE™ remain central to the system's design. The 3D-printed convergence module features sculpted internal passages and a signature gold ceramic coating, combining the visual identity of the VANTA GOLD series with its functional exhaust-flow architecture.
The redesigned rear section uses an X-pipe and compact mufflers to provide meaningful volume reduction with the valves closed while maintaining an exotic tone. With the valves open, the system delivers a stronger and more direct exhaust character that builds toward the high-pitched upper-RPM sound associated with the VANTA GOLD family.
Available in AISI 304 stainless steel or Ti-6Al-4V titanium, the system includes remote valve control as standard and supports transfer of the factory BMW valve actuators for OEM valve operation.
Key Features
- Designed specifically for BMW G80 M3 and G82 M4
- Full dual 3-inch exhaust architecture
- Equal-length exhaust routing
- Enlarged 3-inch AURUM FLOW CORE™
- Proprietary 3D-printed convergence module
- Signature gold ceramic-coated AURUM FLOW CORE™
- Two integrated resonators
- Redesigned X-pipe valved axle-back
- Compact rear mufflers
- Remote valve control included
- Supports factory BMW valve actuator transfer
- Distinct open- and closed-valve sound settings
- Available in AISI 304 stainless steel or Ti-6Al-4V titanium
- Four 4.5-inch exhaust tips
- Satin silver/chrome, satin black, and carbon fiber tip finishes available
- Direct bolt-on installation
- Uses factory mounting locations
- No cutting or welding required during standard installation
- Compatible with matching free-flow, 200-cell, and 400-cell downpipes
- Designed for higher-output S58 builds
- Off-road and closed-course use only
Exhaust Specifications
- Brand: Yonristic Performance
- Product: VANTA GOLD™ EVO Valved Cat-Back Exhaust System
- System Type: Valved Cat-Back Exhaust
- Engine: BMW S58 3.0L Twin-Turbo Inline-Six
- Main Piping: Full Dual 3-Inch
- Architecture: Equal-Length
- Core: Enlarged 3-Inch AURUM FLOW CORE™
- Resonators: Two Integrated Resonators
- Rear Section: X-Pipe Valved Axle-Back
- Valve Control: Yonristic Remote Valve Control
- OEM Valve Integration: Factory BMW Valve Actuator Transfer Supported
- Materials: AISI 304 Stainless Steel or Ti-6Al-4V Titanium
- Exhaust Tips: Four 4.5-Inch Tips
- Tip Finishes: Satin Silver/Chrome, Satin Black, or Carbon Fiber
- Installation: Direct Bolt-On
- Mounting: Factory Mounting Locations
- Cutting/Welding: Not Required for Standard Installation
AURUM FLOW CORE™
The AURUM FLOW CORE™ is a defining component of the VANTA GOLD EVO exhaust system. The proprietary convergence module uses precision 3D-printed internal passages to guide exhaust flow through the central convergence section.
For EVO, the core has been enlarged to match the full dual 3-inch exhaust architecture. The module also receives Yonristic Performance's signature gold ceramic coating, creating the recognizable VANTA GOLD centerpiece.
Resonators & Sound Control
The EVO system incorporates two integrated resonators designed to address metallic rasp and harshness that can become more pronounced at low RPM under load, particularly when paired with higher-flow downpipes.
The resonated midsection works together with the equal-length routing, enlarged AURUM FLOW CORE™, and rear crossover to provide a smoother and more composed exhaust note while retaining the system's distinctive upper-RPM character.
The system specifically targets unwanted sound in the approximately 1,500–2,200 RPM range.
X-Pipe Valved Axle-Back
The redesigned rear section combines an X-pipe crossover with compact mufflers to control sound and reduce rear-section bulk.
With the valves closed, the X-pipe and mufflers provide meaningful volume reduction while maintaining an exotic exhaust tone. With the valves open, the system delivers its full exhaust character with a stronger, more direct sound and a crisp, high-pitched upper-RPM note.
Valve Control
The VANTA GOLD™ EVO includes Yonristic Performance remote valve control as standard, allowing direct control over exhaust valve position and volume.
The system also supports direct transfer of the original BMW factory valve actuators. This allows the exhaust to operate using the vehicle's factory valve programming.
Remote valve control and OEM actuator integration are alternative operating configurations using the same exhaust assembly.
Material Options
The VANTA GOLD™ EVO is available in:
- AISI 304 Stainless Steel — designed for durability and corrosion resistance
- Ti-6Al-4V Titanium — designed for weight reduction
Both material configurations retain the equal-length architecture, enlarged AURUM FLOW CORE™, integrated resonators, and redesigned valved rear section.
Exhaust Tip Options
The system includes four 4.5-inch exhaust tips, providing a larger rear appearance compared with the approximately 4-inch factory tips.
Available finishes include:
- Satin Silver/Chrome
- Satin Black
- Carbon Fiber
Downpipe Compatibility
The VANTA GOLD™ EVO can be paired with:
- Matching Free-Flow Downpipes
- Matching 200-Cell High-Flow Downpipes
- Matching 400-Cell High-Flow Downpipes
The dual-resonator architecture is designed to help manage additional exhaust harshness associated with higher-flow downpipe configurations.
Vehicle Fitment
BMW G80 M3 Sedan
- BMW G80 M3 — S58 3.0L Twin-Turbo Inline-Six
BMW G82 M4 Coupe
- BMW G82 M4 — S58 3.0L Twin-Turbo Inline-Six
Verify compatibility with your specific vehicle configuration before purchase.
Installation
The Yonristic Performance VANTA GOLD™ EVO is designed as a vehicle-specific direct bolt-on system using the factory BMW mounting locations.
The system is designed for proper chassis clearance, alignment, and exhaust-tip positioning. No cutting or welding is required during standard installation.
Professional installation is recommended.
Performance Focus
The full dual 3-inch architecture and enlarged AURUM FLOW CORE™ provide additional exhaust-flow capacity for higher-output S58 builds.
Actual performance gains depend on the complete vehicle configuration, downpipe selection, ECU calibration, and supporting modifications.
Sound Character
The VANTA GOLD™ EVO is designed to provide:
- Signature exotic VANTA GOLD™ tone
- Slightly deeper pitch than the original VANTA GOLD
- Fuller and smoother exhaust character
- Reduced low-RPM metallic rasp
- More composed sound under load
- Crisp, high-pitched upper-RPM character
- Distinct open- and closed-valve sound settings
Off-Road Use Disclaimer
This exhaust system is intended for off-road and closed-course applications only. It is not intended for use on public roads or vehicles subject to applicable emissions, noise, or road-use requirements.
Installation or use of aftermarket exhaust components may affect emissions compliance, vehicle warranty coverage, insurance, noise compliance, and vehicle operation. Verify applicable federal, state, and local laws before installation or use.
