Description
Wurktol Spring Compression Set
This easy to use spring compression set is perfect for the DIYer or professional tech. If you are installing lowering springs or coil over suspension, this kit is most likely required. It allows you to remove the strut from the spring by compressing the spring down enough to disassemble the set. The steel build allows spring compression ranging from 350 mm down to 95mm. This kit is comprised of 2 spring compression tools to be used one on either side of a single spring. Using either the 21mm hex head, or a 1/2 impact drill, attach each compressor evenly, and then tighten them 5-8 turns at a time before switching to the other compressor. Alternate sides until the spring is compressed to the desired size.
Features:
(2) Spring compressors (both to be used on one spring at a time)
350mm-95mm Compression
21mm Socket Size Head
1/2 Impact Head Interior
If you are not familiar with the removal of springs from a strut, please note the spring applies pressure to the assembly and must be compressed to the proper length before removal in order to prevent damaging the springs and/or the strut assembly, and possibly avoid injury. Please consult a professional if you are not capable of using this tool yourself.
