Description
Enhance your A90/91 Toyota Supra's performance on the track with the VTT "GC" Rear Drag Kit. Designed to improve your Supra's speed in 1/4 and 1/2 mile races, this kit allows you to run 17" or 15" wheels with only a minor suspension modification. Shed 43 lbs of unsprung weight from the rear of your car, all while maintaining affordability. This kit is the perfect solution for reducing your elapsed times and significantly lightening your Supra over the stock rear brake setup.
Product Features:
- Plug-and-Play Installation: Utilizes genuine VTT parts with DOT-approved brake lines, CNC 7075 rotor hats/brackets, and a CEL eliminator harness for the brake sensor.
- Weight Reduction: The HD kit offers 35.2 lbs of weight savings per side, while the Race Version saves 43 lbs, providing substantial weight reduction over the stock steel kit.
- Two Variations Available:
- HD Version: Suitable for normal street driving and racing duties.
- VTT Custom Cast HD Rotors
- VTT 4 Piston Caliper
- VTT Street or Race Brake Pads
- DOT Approved Brake Lines
- VTT CNC Rotor Hats and Brackets
- Brake Sensor CEL Eliminator Harness
- M12X1.5 Suspension Arm Bolt
- Race Version: Recommended for race duties only, not suitable for street use.
- Genuine Wilwood Ultra-Lite Scalloped Rotors
- VTT 4 Piston Caliper
- VTT Street or Race Brake Pads
- DOT Approved Brake Lines
- VTT CNC Rotor Hats and Brackets
- Brake Sensor CEL Eliminator Harness
- M12X1.5 Suspension Arm Bolt
- HD Version: Suitable for normal street driving and racing duties.
Fitment Details:
- Compatibility: A90/91 Toyota Supra with minor suspension modifications. For 15" rear wheels, factory knuckle modification and SPL Traction links are required.
Weight Details:
- OEM Steel Kit: 32.2 lbs per side (64.4 lbs total)
- VTT HD Kit Spec 37 Rotors: 14.6 lbs per side (29.2 lbs total), saving 35.2 lbs over stock
- VTT Scalloped Kit: 10.7 lbs per side (21.4 lbs total), saving 43 lbs over stock
Component Weights:
- HD Rotor Spec 37: 9 lbs
- Scalloped Rotor: 5.1 lbs
- VTT 4 Piston Caliper: 3.6 lbs
- Rotor Hat: 1 lb
- Pads (One Side): 1 lb
Important Notes:
- Parking Brake Functionality: The kit does not retain the stock parking brake, resulting in a dash light indicator. This is a race kit, and the rear parking brake function will be lost.
- Brake Pad Bedding: Proper bedding of the brake pads is essential to achieve full braking performance. Failure to do so may result in only 30-50% braking capability. If pads are glazed, remove the rotor, sand them down, and rebed.
Disclaimer:
The HD kits are designed for some street use and drag racing only. They are not intended for heavy braking environments such as Auto-X or road racing. Scalloped kits should never be used for street driving. Always drive within your limits!
