Description
Upgrade the front suspension and alignment geometry of your lifted Ford Ranger with the SuperPro Fixed Offset Front Upper Control Arm Set. Designed as a direct bolt-on solution for vehicles lifted approximately 50mm to 75mm (2 to 3 inches), these performance upper control arms incorporate fixed geometry correction into the arm design, eliminating the need for time-consuming adjustments and trial-and-error setup.
The SuperPro Fixed Offset Upper Control Arms are engineered to provide improved drivability, enhanced steering feel and accuracy, greater straight-line stability, proper turn-in, and more predictable cornering behavior straight out of the box. The fixed offset geometry is designed to help restore appropriate suspension geometry on lifted trucks while providing increased clearance to the coilover strut and greater arm articulation.
Each arm is constructed from durable steel with a tubular design and features a high-articulation ball joint for enhanced durability in both on-road and off-road applications. The included bushings and ball joints provide a complete front upper control arm solution designed for demanding performance and rugged use.
The SuperPro Fixed Offset Upper Control Arm is an all-in-one solution for vehicles lifted between 50mm and 75mm. Based on a 50mm lift, the arms provide an increase of approximately 2.5 to 3.5 degrees of caster and up to 1.5 degrees of negative camber increase. These geometry corrections, combined with increased clearance and articulation, are designed to deliver better-than-stock road manners on the road and improved capability when the pavement ends.
A wheel alignment is required after installation to properly set the vehicle's suspension geometry.
Vehicle Fitment
- 2027 Ford Ranger Lariat — Suspension: Control Arms
- 2024-2026 Ford Ranger Lariat — L4 2300cc — Suspension: Control Arms
- 2024-2026 Ford Ranger Lariat — V6 — Suspension: Control Arms
- 2027 Ford Ranger XL — Suspension: Control Arms
- 2024-2026 Ford Ranger XL — L4 2300cc — Suspension: Control Arms
- 2027 Ford Ranger XLT — Suspension: Control Arms
- 2024-2026 Ford Ranger XLT — L4 2300cc — Suspension: Control Arms
- 2024-2026 Ford Ranger XLT — V6 — Suspension: Control Arms
Product Specifications
- Part Number: sprTRC6750
- Product Type: Control Arm Upper - Arm Assembly
- Suspension Position: Front
- Kit Contents: 2 Arms
- Adjustable: No
- Ball Joint Included: Yes
- Bushing(s) Included: Yes
- Bushing Color: Blue
- Color: Blue
- Construction: Tubular
- Material: Steel
- Grade Type: Performance
- Suspension Grade Type: Premium
- Grease Fitting Included: Yes
- Greaseable: Yes
- Installation Difficulty: Moderate
- Installation Time: 3 hours
- Wheel Alignment Required: Yes
- Prop 65 Warning: Warning: This product can expose you to chemicals which are known to the State of California to cause cancer and reproductive harm.
- Prop 65: Yes
