Description
While BMW left plenty of room to lower the ride height of the new G8X M3 and M4, they unfortunately did not leave enough clearance between the front wheels and the front fender liners to adequately space out the wheels for an ideal stance. The result is a brand new M3 or M4 with wheels that look sunken into the fender arches.
The issue stems from the clearance between the front wheel and the cooling fins behind the heat exchangers mounted in the front bumper. In factory guise, trying to fit anything larger than 12mm spacers would result in rubbing when turning the vehicle. This was especially problematic in reverse as the downward angle of the fins would cause them to snap off when contacted by the tire.
The RKP front liner set includes both left and right front liners that have been professionally modified to enhance the clearance where the heat extractors are located. And since OE BMW liner cores are used, these modified liners will fit just like your factory liners.
NOTE: While these liners provide extra clearance whether using spacers or running aftermarket wheels, we cannot guarantee clearances with aftermarket wheel fitments and different tire sizes.
Product Details:
Includes both left and right front fender liners
Genuine OE BMW fender liner cores professionally modified
Original brittle plastic fins have been replaced with stainless steel mesh with a black powder coat finish.
The standard shipping rate applies to orders within the continental United States. If you intend to place an order outside of the continental US, please reach out to support@x-ph.com for assistance.
