Description
- Eliminate Pedal Lag
- Improves Vehicle Acceleration
- Increases Low and Mid-Range Horsepower and Torque
- Eliminates Stalling of Manual Equipped Mustangs
- Easy Plug & Play Installation
- Stackable with Common Aftermarket OBD-II Programmers
- Fits All 2011-2017 Mustangs
Eliminates Pedal Lag. The drive by wire accelerator pedal of the 2011 to 2017 Mustang is well known for lag. If you have ever tried to speed up to merge with traffic you have most likely noticed a delay in throttle response. On older Mustangs the gas pedal was attached to a mechanical cable that ran to the throttle body or carburetor that provided instant feedback. However, on modern Mustangs the gas pedal is electronically controlled, similar to a dimmer switch, which has to send the signal to the ECU, which in turn sends the signal to the throttle body causing this momentary delay. To eliminate this annoying delay JMS created their PedalMAX Electronic Throttle Enhancement Device.
Eliminates Stalling and Improves Power. The JMS PedalMAX will not only eliminate pedal lag, but it will also enhance throttle response and improve horse power and torque in the low to mid RPM range. The PedalMAX is also ideal for eliminating stalling when accelerating from a stop in manual equipped Mustangs, a notorious issue for the 2013-2014 Shelby GT500's.
Maximum Throttle Response. Out of the box the PedalMAX Throttle Enhancer is preset to provide maximum increase in throttle response. If you find the stock setting to be to aggressive for your driving needs you can insert the supplied 4-pin RED de-sensitizing plug into the device. The RED de-sensitizing plug will reset throttle response to about 60% of the maximum setting. However, with the optional Remote Throttle Control Knob (part# BX-6999) you can adjust throttle response from zero to maximum or anywhere in between to match your specific driving style.
Stackable. The JMS PedalMAX can be stacked or used in conjunction with other aftermarket OBD-II programmers and monitors such as: SCT, Diablosport, Hypertech, Superchips, Bully Dog, and Edge as well as JMS' own BoostMAX Performance Booster.
Modern Electronics. The PedalMAX Drive By Wire Throttle Enhancement Device features JMS's exclusive state of the art digital technology housed in a proprietary sealed enclosure. The PedalMAX comes complete with plug and play wiring harness using OEM connectors for a quick installation.
Easy Plug & Play Installation. The PedalMAX Throttle Enhancer simply connects to the factory stock pedal position sensor using an OEM style connector with no permanent modifications required. PedalMAX is 100% reversible making it warranty friendly.
Application. This JMS PedalMAX Drive By Wire Throttle Enhancement Device is designed for use on all 2011-2017 Mustangs including the V6, EcoBoost, GT, BOSS, Shelby GT500 and GT350 models.
