iE Stage 3 Turbo Map Pack | Fits Audi B9 S4, S5, SQ5

Unlock the performance potential of your Audi with the Integrated Engineering (iE) Stage 3 Turbo Map Pack, engineered for compatible 2017–2024 Audi B9 S4 and S5 3.0T models and 2018–2024 Audi SQ5 3.0T models equipped with the Quattro all-wheel-drive system. Designed specifically for bolt-in TTE810 or Pure750 hybrid turbochargers, this advanced ECU calibration transforms your turbocharged Audi into a high-performance build with increased power, strong torque delivery, and refined drivability.

Unlike generic hybrid turbo tunes, the iE Stage 3 Map Pack is developed around the airflow and performance characteristics of the supported turbocharger upgrades. The calibration is designed to deliver smooth, predictable power while managing boost and engine operation for a more controlled driving experience. With compatible hardware and 93-octane fuel, the system is rated for up to 598 HP and 614 ft-lbs of torque, depending on the selected turbocharger and vehicle configuration.

Advanced Engine Protection with AutoProtect™

The iE tuning platform incorporates AutoProtect™ safety logic, which monitors critical engine operating conditions and can reduce power when abnormal conditions are detected. This system is designed to help protect the engine during demanding operation while supporting consistent performance. AutoProtect is an additional safeguard, not a guarantee against mechanical failure.

Optimized Transmission Performance

For compatible vehicles, the iE Stage 3 Transmission Control Unit (TCU) tune is designed to complement the increased power of a hybrid turbo setup. Features include optimized shift points, a higher RPM limit, faster shifts, and updated drive-mode mapping.

Owners already running a compatible iE Stage 2 TCU tune may be eligible for a free upgrade to the Stage 3 TCU tune. For supported 2022-and-newer B9 3.0T models with a locked TCU, iE states that its custom ECU calibration can communicate with the transmission without requiring a separate TCU tune, including Stage 3+ applications. Confirm support for your exact vehicle and software before ordering.

Convenient POWERlink Activation

The iE Map Pack uses the POWERlink Tuner and iE mobile app for convenient cloud-based activation. When purchasing the map pack, enter the POWERlink serial number beginning with “V4” at checkout. After purchase, connect the device to the app through Bluetooth and allow the system to synchronize. According to iE, map credits typically appear within an hour or less.

Manufactured by Integrated Engineering (iE), the Stage 3 Turbo Map Pack is designed for enthusiasts building a compatible high-output Audi 3.0T platform with upgraded hybrid turbochargers and supporting hardware.

Key Features

• Brand: Integrated Engineering (iE)

• Product: Stage 3 Turbo Map Pack

• Product Type: ECU Performance Calibration

• Vehicle Platform: Audi B9 3.0T S4, S5, and SQ5

• Turbocharger Compatibility: TTE810 and Pure750 bolt-in hybrid turbochargers

• Maximum Advertised Output: Up to 598 HP and 614 ft-lbs of torque on 93-octane fuel, depending on turbocharger and configuration

• Developed specifically for compatible hybrid turbocharger upgrades.

• Designed for smooth, predictable power delivery and refined drivability.

• Includes iE AutoProtect™ safety logic.

• Supports compatible iE Stage 3 TCU tuning options.

• Stage 3 TCU features include optimized shift points, faster shifts, a higher RPM limit, and updated drive mapping.

• Uses the iE POWERlink Tuner and mobile app for activation and ECU flashing.

• Cloud-based map credit delivery linked to the POWERlink serial number.

• Requires the iE APEX Tune Suite for Stage 3 map access.

• Intended for use with the required supporting hardware and compatible vehicle software.

Power Guide

Power Disclaimer: These are manufacturer-advertised figures. Actual output varies with the vehicle, turbocharger, fuel quality, supporting modifications, calibration, and testing conditions. These figures should not be treated as guaranteed wheel horsepower or engine output under every configuration.

Required Hardware

The iE Stage 3 Turbo Map Pack requires the appropriate turbocharger and supporting modifications for the selected setup.

• Air intake

• Upgraded intercooler

• Downpipe

• TTE810 or Pure750 hybrid turbocharger

• iE turbo inlet pipe

• iE hybrid turbo adapter

• iE Stage 3 Map Pack

• iE APEX Tune Suite

• iE Stage 3 Transmission Tune, where required or selected for the vehicle

Important: Verify the exact required components, transmission tuning requirements, and supported hardware combinations with iE before purchasing. The map pack is a software calibration and should not be assumed to include the physical hardware listed above.

Fitment

2017–2024 Audi S4 3.0T Quattro

2017–2024 Audi S5 3.0T Quattro

2018–2024 Audi SQ5 3.0T Quattro

Fitment Note: This product is intended for compatible Audi B9 3.0T applications. ECU software, transmission configuration, turbocharger setup, market region, and model year can affect compatibility.

Rest-of-World (ROW) Disclaimer: ROW calibrations may not be supported. Customers outside the United States should contact iE support to confirm compatibility before ordering. Do not assume that a US-market calibration will work with a vehicle from another market.

Installation & Compatibility Notes

• Requires a compatible iE POWERlink Tuner and the appropriate iE APEX Tune Suite access.

• Enter the POWERlink serial number beginning with “V4” during checkout as instructed by iE.

• Connect the POWERlink device to the iE app through Bluetooth and allow the map credits to synchronize.

• Verify that the vehicle has the required TTE810 or Pure750 turbocharger and supporting intake, intercooler, downpipe, inlet pipe, and adapter.

• Confirm ECU and TCU compatibility before flashing, especially on 2022-and-newer vehicles with locked transmission control units.

• Use the correct calibration for the vehicle's fuel type and installed hardware.

• ECU tuning can affect emissions compliance, warranty coverage, reliability, and component service life. Check applicable regulations and manufacturer guidance before installation.

• Professional installation and calibration support are recommended for high-output turbocharger builds.