Description
Fine-tune your vehicle's suspension setup with the H&R 60mm I.D. Race Spring, engineered for performance-focused street, track, and motorsport applications. Manufactured in Germany from specialized (hf) 54SiCr6 high-tensile spring steel, H&R race springs are designed to combine lightweight construction, durability, and precise suspension tuning capabilities.
This spring features a 200mm free length, a 180 spring rate designation, and a stated spring rate of 1,027 lb/in. Its 60mm inner diameter makes it suitable for compatible coilover systems designed around this spring specification. The spring is intended for custom suspension setups where selecting the correct spring length and rate is essential for achieving the desired handling characteristics, suspension travel, and vehicle balance.
H&R uses advanced materials and precision manufacturing techniques to produce race springs with thinner wire and reduced weight. According to H&R, its specialized spring steel construction delivers springs that are approximately 15% lighter on average and provide up to 10% more travel than competing springs of comparable rates.
With a wide range of spring lengths and rates available, H&R provides suspension builders and motorsport enthusiasts with the flexibility to tailor their setups to specific vehicle requirements and driving conditions.
Key Features
-
Brand: H&R
-
Product: 60mm I.D. Race Spring
-
Free Length: 200mm
-
Spring Rate: 180 designation / 1,027 lb/in as supplied
-
Inner Diameter: 60mm
-
Manufactured from specialized (hf) 54SiCr6 high-tensile spring steel
-
Lightweight construction designed for demanding suspension applications
-
Manufactured in Germany
-
Designed for custom suspension tuning and motorsport use
-
Wide range of H&R spring lengths and rates available
-
Tender springs available separately within the H&R race spring range
-
Factory pre-blocked spring construction designed to help prevent permanent settling or sagging
-
Suitable for compatible coilover systems and custom suspension configurations
Technical Specifications
-
Manufacturer: H&R
-
Product Type: Performance Race Spring
-
Inner Diameter: 60mm
-
Free Length: 200mm
-
Spring Rate Designation: 180
-
Listed Spring Rate: 1,027 lb/in
-
Material: (hf) 54SiCr6 spring steel
-
Country of Manufacture: Germany
-
Intended Application: Custom suspension tuning and motorsport setups
Specification Note: The supplied product title lists a 180 rate designation and a spring rate of 1,027 lb/in. Confirm the manufacturer's exact rate specification and unit before ordering to ensure the spring matches your suspension requirements.
Fitment
Universal motorsport-style spring specification for compatible 60mm I.D. coilover systems.
This spring is not vehicle-specific based on the supplied product information. Compatibility depends on the coilover manufacturer, spring seat dimensions, required free length, spring rate, and available suspension travel.
Before ordering, verify that your suspension system accepts a 60mm inner-diameter spring with a 200mm free length and the specified spring rate. Do not assume direct fitment to a particular vehicle or coilover system without confirming its specifications.
Installation & Compatibility Notes
-
Confirm the coilover system requires a 60mm inner-diameter spring.
-
Verify the required free length and spring rate for your vehicle and suspension setup.
-
Ensure the spring is compatible with the upper and lower spring seats.
-
Check suspension travel, preload requirements, and clearance throughout the suspension's operating range.
-
Have spring selection and installation verified by a qualified suspension specialist, particularly for track or motorsport use.
-
Tender springs are available within the H&R range but should not be assumed to be included with this individual spring.
The standard shipping rate applies to orders within the continental United States. If you intend to place an order outside of the continental US, please reach out to support@x-ph.com for assistance.
