Description
Engineered for the performance-focused Subaru VA platform, the Dežru Spec-S Coilover Suspension System is designed for drivers who want to get more out of their STI without giving up the comfort and practicality needed for everyday driving. Whether you're commuting, carving through back roads, competing in autocross, or attending occasional high-performance driving events (HPDE), the Spec-S delivers a performance-oriented suspension setup built around control, adjustability, and confidence.
At the core of the system are digressive inverted monotube dampers, designed to provide responsive low-speed damping during braking, cornering, turn-in, and rapid directional transitions. This damping approach aims to reduce excessive body movement while maintaining compliance over uneven pavement, helping your STI feel more composed and predictable on real-world roads.
The Spec-S pairs 450 lb/in front and 450 lb/in rear linear HyperCoil springs with adjustable damping to provide a consistent spring-rate foundation and greater flexibility in suspension tuning. The setup is designed to improve chassis response and manage weight transfer without relying solely on excessive spring stiffness.
Featuring fixed-length inverted damper bodies and an adjustable ride-height range of approximately 25–50 mm (1–2 inches) lower than standard ride height, the Spec-S offers the opportunity to achieve a more aggressive stance while aiming to preserve usable suspension travel when properly installed and adjusted. OEM-style upper mounts maintain a factory-style mounting arrangement, while hand-built, dyno-matched damper pairs are designed to deliver consistent damping performance from side to side.
With a target ride-frequency range of approximately 1.9–2.2 Hz, the Dežru Spec-S is designed to strike a balance between responsive handling and everyday drivability.
Upgrade your STI with suspension designed to make cornering more controlled, transitions more composed, and every drive more engaging.
Key Features
-
Digressive Inverted Monotube Dampers: Designed to improve body-motion control and deliver responsive damping during braking, cornering, and directional transitions.
-
Adjustable Damping: Fine-tune suspension response to suit daily driving, spirited street use, autocross, and occasional HPDE events.
-
450 lb/in Front and Rear Spring Rates: Matching spring rates provide the specified foundation for a consistent, performance-focused suspension setup.
-
Linear HyperCoil Springs: Designed for predictable spring response throughout suspension travel.
-
Fixed-Length Inverted Damper Bodies: Intended to support consistent damper operation and preserve usable suspension travel when correctly configured.
-
Adjustable Lowered Ride Height: Approximately 25–50 mm (1–2 inches) of lowering for a sportier stance and adjustable setup.
-
OEM-Style Upper Mounts: Maintain a factory-style mounting arrangement.
-
Hand-Built, Dyno-Matched Damper Pairs: Designed for consistent damping performance from side to side.
-
Street and Performance Versatility: Suitable for drivers seeking a more controlled suspension setup for everyday use and spirited driving.
Performance Benefits
Sharper Turn-In and More Responsive Handling
The Spec-S is designed to improve suspension response during steering inputs and directional transitions. By combining digressive damping with performance-oriented spring rates, the system aims to help your STI feel more connected and composed through corners.
Improved Chassis Control
Braking, acceleration, and cornering all create weight transfer that influences vehicle behavior. The Spec-S aims to manage these movements more effectively, helping reduce excessive body motion and deliver a more controlled driving experience.
Adjustable Damping for Your Driving Style
Dial in suspension response to better match your preferences and driving environment. Whether you're prioritizing daily comfort or a firmer, more responsive feel for spirited driving, adjustable damping provides flexibility within the system's available range.
Sportier Stance and Adjustable Ride Height
The approximately 25–50 mm lowering range allows you to refine the vehicle's stance while configuring the suspension for your intended use. Proper setup remains important for suspension travel, alignment, tire clearance, and damper operation.
Performance That Fits Everyday Life
The Spec-S is designed for enthusiasts who want more responsive suspension behavior without choosing an exclusively track-focused setup. Actual ride comfort will depend on damping settings, road conditions, tires, alignment, and the vehicle's configuration.
Why Choose 450 lb/in Front and 450 lb/in Rear?
The Dežru Spec-S uses matching 450 lb/in front and rear springs as part of a suspension package intended to enhance chassis control while maintaining predictable road manners.
The front springs provide support during braking and steering inputs, while the rear springs contribute to the vehicle's overall response during acceleration and cornering. The digressive damper valving works alongside the springs to manage suspension movement, helping balance control and compliance without depending on spring stiffness alone.
This configuration is designed to support:
-
More controlled body movement through corners
-
Responsive suspension behavior during turn-in and transitions
-
Consistent front-to-rear spring-rate specifications
-
Adjustable damping for different driving preferences
-
A versatile setup for daily driving and spirited performance use
The final handling balance depends on the complete suspension system, including suspension geometry, motion ratios, anti-roll bars, alignment, tires, and damper settings. Spring rates alone do not guarantee reduced understeer or a particular level of grip.
Is the Dežru Spec-S Right for Your STI?
The Dežru Spec-S is designed for Subaru WRX STI owners who want a more adjustable, performance-focused suspension setup for both street driving and occasional performance events.
If you're looking for a sportier stance, more controlled body movement, and the flexibility to fine-tune your suspension response, the Spec-S offers a compelling option for upgrading your VA-chassis STI.
Professional installation and alignment are recommended. For autocross and HPDE use, damping settings and ride height should be selected according to tire choice, driving conditions, and the intended application.
Vehicle Fitment
-
Make: Subaru
-
Model: WRX STI
-
Model Years: 2015–2021
-
Chassis Code: VA
-
Drivetrain: All-wheel drive (AWD)
-
Body Style: Sedan
Fitment note: Confirm compatibility with the specific model year, trim, and suspension configuration before ordering or installation. This listing is for the WRX STI and should not be assumed to fit the non-STI WRX.
Disclaimer: This product is built to order. Please allow approximately 3–4 weeks for production before shipment.
