Description
The Dežru Spec-S Coilover System is engineered for the BMW G20 3 Series, delivering a carefully balanced combination of ride comfort, chassis control, and performance-oriented handling. Designed for drivers who use their BMW as a daily vehicle but also enjoy spirited back-road driving and occasional HPDE track days, the Spec-S aims to improve suspension response and vehicle composure without sacrificing everyday usability.
Featuring digressive monotube dampers, the Spec-S is designed to provide controlled body movement during braking, cornering, and rapid directional changes while maintaining compliance over uneven road surfaces. Its damping characteristics prioritize low-speed chassis control while helping the suspension respond progressively to changing road conditions. The system targets a ride frequency of approximately 2.0 Hz, supporting a planted, responsive driving feel suited to both street and performance use.
The fixed-length damper bodies work with an adjustable lowered ride height of approximately 25–30 mm, helping maintain appropriate suspension travel and consistent handling characteristics within the intended ride-height range. Combined with linear HyperCoil springs and OEM-style upper mounts, the Spec-S provides a performance-focused suspension package designed to retain the refinement expected from a modern BMW sedan.
With 350 lb/in front and 800 lb/in rear spring rates, this setup is tailored toward drivers seeking additional chassis support and a more controlled response under acceleration and cornering. The spring and damper combination is designed to deliver predictable suspension behavior and improved driver confidence when pushing the G20 harder.
Key Features
-
Digressive monotube dampers: Designed to improve chassis control, manage body movement, and provide consistent damping performance.
-
Fixed-length damper bodies: Engineered to work with the intended lowered ride-height range.
-
Adjustable ride height: Approximately 25–30 mm of lowering for a lower stance and performance-oriented setup.
-
Adjustable damping: Allows suspension response to be fine-tuned for different driving conditions.
-
350 lb/in front spring rate: Supports front-end control while targeting a balance between compliance and responsiveness.
-
800 lb/in rear spring rate: Provides a firm rear suspension setup intended to improve platform control under acceleration and cornering.
-
Linear HyperCoil springs: Deliver a consistent spring response throughout suspension travel.
-
OEM-style upper mounts: Retain a factory-style mounting configuration and aim to help limit additional noise and vibration.
-
Hand-built, dyno-matched dampers: Designed to provide consistent damping characteristics across matched components.
Performance Character
The Dežru Spec-S is designed to give the BMW G20 a more controlled and responsive suspension feel. Its digressive damping profile aims to provide support during initial steering inputs, braking, and cornering transitions while maintaining compliance over imperfect pavement.
The 350 lb/in front and 800 lb/in rear spring combination creates a distinctly performance-oriented setup. The higher rear spring rate is intended to increase rear suspension support, while the front rate targets a balance between steering response and front-end compliance. Actual handling characteristics will depend on the vehicle configuration, tire setup, alignment, damping adjustment, and suspension geometry.
For daily driving, the Spec-S aims to deliver a composed, controlled ride. During spirited driving and occasional HPDE sessions, it is designed to provide more consistent chassis behavior and a more connected driving experience.
Why Choose 350 lb/in Front and 800 lb/in Rear Springs?
The BMW G20 combines a refined road-going suspension with a chassis capable of spirited performance driving. For drivers seeking a more controlled setup, the Dežru Spec-S pairs a 350 lb/in front spring with an 800 lb/in rear spring to create a specific performance-oriented suspension balance.
Front suspension — 350 lb/in
The front spring rate is intended to provide additional support during braking and turn-in while retaining some compliance over uneven road surfaces. It contributes to front-end response and helps the suspension manage changes in load during cornering.
Rear suspension — 800 lb/in
The higher rear spring rate is intended to provide substantial rear suspension support and limit suspension compression under load. Its effect on acceleration squat, cornering balance, and traction will depend on the G20's rear suspension geometry, spring mounting arrangement, damping settings, and drivetrain configuration.
Matched spring and damper performance
Spring rates alone do not determine how a vehicle handles. The Spec-S combines its linear HyperCoil springs with digressive damping intended to manage body motion and maintain predictable suspension response. Correct setup, alignment, and damping adjustment remain important for achieving the desired balance between street comfort and track performance.
This configuration is best considered a performance-focused setup rather than a universal comfort upgrade. Drivers should confirm that the spring rates are appropriate for their exact G20 model, intended use, and preferred ride characteristics before purchasing.
Who Is the Dežru Spec-S For?
The Dežru Spec-S is intended for BMW G20 owners who want a lowered stance and a more performance-focused suspension setup for:
-
Daily driving with a firmer, more controlled suspension character
-
Spirited back-road and canyon driving
-
Improved chassis support during cornering and directional transitions
-
Occasional HPDE and performance driving events
-
Drivers seeking adjustable damping and a customized suspension setup
Vehicle Fitment
Vehicle: BMW 3 Series (G20)
Ride-height adjustment: Approximately 25–30 mm lower
Spring rates: 350 lb/in front / 800 lb/in rear
Important fitment note: Confirm compatibility with the exact model year, trim, engine, and drivetrain before listing or purchasing. Do not assume fitment across all G20 variants, including M340i and xDrive models, unless the manufacturer confirms compatibility.
Disclaimer: This product is built to order. Please allow approximately 3–4 weeks for production before shipment.
