null

AWE 4.5" S-FLO Carbon Intake System for Audi RS3 / TT RS 2.5T

$605.00 - $1,515.00
Weight:
22.00 LBS
Shipping:
Calculated at Checkout

Description

box with a massive, high-flow S-FLO Filter featuring a frontal opening and a 30% increase in filter surface area compared to the factory filter.

The system combines the oversized filter with a 4.5-inch carbon fiber elbow to maximize airflow and enhance turbocharger induction sounds. A bespoke CNC laser-cut stainless steel support bracket provides secure mounting and stability.

Designed for drivers looking to unleash the distinctive turbocharger sounds of their Audi RS 3 or TT RS, the Shortie Carbon Intake delivers an aggressive induction experience while providing increased filter surface area and improved airflow capacity.

Option 3: S-FLO Open Carbon Intake System

The AWE S-FLO Open Carbon Intake System combines the S-FLO Carbon Inlet Tube with the S-FLO Shortie Carbon Intake to create a complete 4.5-inch open-element intake configuration.

Featuring a consistent 4.5-inch diameter from the S-FLO Filter to the turbo inlet coupler, this configuration provides a high-flow pathway designed to reduce intake restrictions and support improved engine performance.

The S-FLO Open Carbon Intake System delivers maximum gains of +7 horsepower and +3 lb-ft of torque at the wheels when paired with Stage 1+ software. In addition to its performance improvements, the open-element design produces pronounced turbocharger induction and diverter valve sounds, providing an engaging driving experience with every acceleration.

Option 4: S-FLO Closed Carbon Intake System

The AWE S-FLO Closed Carbon Intake System combines all the components of the S-FLO intake suite with a specially designed carbon fiber airbox to create a complete enclosed intake solution.

The carbon fiber airbox extends across the entire width of the front grille, allowing it to collect a significant amount of fresh, cold air from the front of the vehicle and direct it toward the S-FLO Filter. Its increased airbox volume helps ensure that the 2.5T engine receives an adequate supply of cold air, even under demanding driving conditions.

Constructed from genuine 2x2 carbon fiber, the enclosed airbox helps reduce heat soak during hard driving while maintaining an efficient airflow path. The system is optimized to capture substantially more cold air than the factory configuration and allows the entire air filter surface area to be utilized.

When paired with Stage 1+ software, the S-FLO Closed Carbon Intake System delivers maximum gains of +17 horsepower and +7 lb-ft of torque at the wheels, as specified in AWE's performance figures. It is also engineered to support boost levels higher than factory settings.

Massive 4.5-Inch Carbon Fiber Intake Tube

At the center of the AWE S-FLO Carbon Intake Suite is a colossal 4.5-inch carbon fiber intake tube designed to maximize airflow throughout the intake system. Its large, constant-diameter construction provides a less restrictive pathway between the air filter and turbocharger inlet, supporting improved engine breathing and performance.

The intake components feature genuine 2x2 carbon fiber construction with UV-stabilized resin and a protective clear coat, providing long-term durability and a premium appearance.

High-Flow, Washable S-FLO Filter

The AWE S-FLO Filter is specifically engineered to maximize airflow throughout the S-FLO intake system. Featuring a 30% increase in filter surface area compared to the factory configuration, the high-flow filter provides increased filtration area to support improved airflow to the engine.

The S-FLO Filter is washable and oil-less, offering convenient maintenance without requiring filter oil. Its design works with the oversized carbon fiber intake components to enhance airflow and maximize the performance potential of the Audi 2.5T engine.

Precision-Machined and CNC-Engineered Components

The AWE S-FLO Carbon Intake Suite includes a bespoke CNC laser-cut stainless steel support bracket, where applicable, to provide secure mounting and long-term stability. Each intake configuration is designed to integrate with the factory inlet ducting while retaining the original mounting locations.

The system includes the appropriate 4.5-inch to 3-inch coupler to connect to the factory 3-inch turbo inlet pipe, ensuring compatibility with the original turbo inlet configuration.

Optional Add-On: S-FLO 4-Inch Coupler

The S-FLO Carbon Inlet Tube, Shortie Carbon Intake, and Open/Closed S-FLO Carbon Intake Systems come standard with a 4.5-inch to 3-inch coupler designed to connect to the factory 3-inch turbo inlet pipe.

For vehicles equipped with aftermarket 4-inch turbo inlet pipes, AWE offers the optional S-FLO 4-Inch Coupler. This additional coupler transitions from the 4.5-inch intake diameter to a 4-inch connection, allowing compatibility with aftermarket turbo inlet pipes measuring 4 inches in diameter.

Part Number: 7260-11002

The S-FLO 4-Inch Coupler is available separately.

Required Add-On: DV Adapter Kit for 2019+ Models

The AWE DV Adapter Kit is required for installation on 2019 and newer Audi models. This adapter is machined in-house from billet 6061 aluminum and is designed to provide the necessary connection for the diverter valve configuration on applicable vehicles.

The DV Adapter Kit includes:

  • One billet 6061 aluminum DV adapter.

  • Two oil-resistant O-rings.

  • Two worm-drive clamps.

  • 8.75 inches of high-temperature silicone hose.

Important Fitment Note: The AWE DV Adapter Kit is required for all 2019+ models and must be purchased separately unless included as part of the selected configuration.

Performance Gains

The AWE S-FLO Carbon Intake Suite delivers measurable performance improvements depending on the selected intake configuration and engine software.

S-FLO Closed Carbon Intake System:

  • Maximum gains of +17 horsepower at the wheels.

  • Maximum gains of +7 lb-ft of torque at the wheels.

  • Performance figures achieved with Stage 1+ software.

S-FLO Open Carbon Intake System:

  • Maximum gains of +7 horsepower at the wheels.

  • Maximum gains of +3 lb-ft of torque at the wheels.

  • Performance figures achieved with Stage 1+ software.

These performance gains are dependent on the selected configuration and supporting engine software.

What's Included

The contents of the package depend on the selected S-FLO Carbon Intake configuration and applicable options.

Depending on the selected configuration, the package includes:

  • Selected S-FLO Carbon Intake components.

  • AWE S-FLO high-flow filter, where applicable.

  • Bespoke CNC laser-cut stainless steel support bracket, where applicable.

  • Necessary intake couplers.

  • 4.5-inch to 3-inch coupler for the factory turbo inlet pipe.

  • DV Adapter Kit, if selected for a 2019+ model.

  • All necessary installation hardware.

Important Notes

  • The AWE DV Adapter Kit is required for fitment on 2019 and newer models.

  • The DV Adapter Kit is an additional component and must be selected or purchased separately.

  • The optional S-FLO 4-Inch Coupler (Part Number: 7260-11002) is available separately for aftermarket 4-inch turbo inlet pipes.

  • Performance gains vary depending on the selected intake configuration and supporting software.

  • The AWE 4.5-Inch S-FLO Carbon Intake Suite is intended for racing use only.

AWE Fitment and Check Engine Light Guarantees

The AWE S-FLO Carbon Intake Suite is designed, engineered, and tested in-house at AWE. It features factory mounting location integration, precision-engineered connections, and AWE's Perfect Fitment Guarantee and No Check Engine Light Guarantee.

Key Features

  • Modular intake system with multiple configuration and upgrade options.

  • Available as individual components or complete open and closed intake systems.

  • Largest constant-diameter intake system available for the Audi 8V/8Y RS 3 and MK3 TT RS.

  • Massive 4.5-inch carbon fiber intake tube.

  • 30% increase in filter surface area compared to stock.

  • Genuine 2x2 carbon fiber construction.

  • UV-stabilized resin and protective clear coat.

  • High-flow, washable, oil-less AWE S-FLO Filter.

  • S-FLO Closed Carbon Intake System optimized to capture significantly more cold air than stock.

  • Closed airbox design allows the entire air filter to be utilized.

  • Increased airbox volume helps maintain cold air supply under demanding conditions.

  • Enhanced turbocharger spool and diverter valve sounds.

  • S-FLO Closed Carbon Intake System: maximum gains of +17 HP and +7 lb-ft of torque at the wheels with Stage 1+ software.

  • S-FLO Open Carbon Intake System: maximum gains of +7 HP and +3 lb-ft of torque at the wheels with Stage 1+ software.

  • Bespoke CNC laser-cut stainless steel support bracket, where applicable.

  • Integration with factory inlet ducting.

  • Retains original factory mounting locations.

  • Includes 4.5-inch to 3-inch coupler for factory turbo inlet pipe.

  • Optional 4.5-inch to 4-inch coupler for aftermarket turbo inlet pipes.

  • DV Adapter Kit required for 2019+ models.

  • Designed, engineered, and tested in-house at AWE.

  • AWE Perfect Fitment Guarantee.

  • AWE No Check Engine Light Guarantee.

  • Intended for racing use only.

Vehicle Fitment

The AWE 4.5-Inch S-FLO Carbon Intake Suite is engineered specifically for the following Audi applications:

  • Audi RS 3 (8V): 8V RS 3 models.

  • Audi RS 3 (8Y): 8Y RS 3 models.

  • Audi TT RS (MK3): Third-generation MK3 TT RS models equipped with the 2.5T engine.

Fitment Requirements:

  • 2019 and newer models require the additional AWE DV Adapter Kit for proper installation.

  • The included 4.5-inch to 3-inch coupler connects to the factory 3-inch turbo inlet pipe.

  • Vehicles equipped with aftermarket 4-inch turbo inlet pipes require the optional AWE S-FLO 4-Inch Coupler (Part Number: 7260-11002).