Description
Upgrade the rear-end appearance of your Dodge Charger with the Anderson Composites Type-OE Carbon Fiber Deck Lid. Designed as a lightweight carbon fiber replacement for the factory deck lid, this component delivers a premium motorsport-inspired look while maintaining the Charger's distinctive rear profile.
Anderson Composites specializes in high-quality carbon fiber automotive components, combining careful craftsmanship with more than 20 years of carbon fiber manufacturing experience. Each component is produced with attention to carbon fiber weave consistency, carbon-to-resin ratio, and overall finish, then inspected to maintain the brand's quality standards.
The Type-OE Deck Lid is manufactured using a vacuum-infused process with 3K, 2x2 twill carbon fiber cloth. It features a marine-grade gel coat containing UV inhibitors, which is applied and polished to help protect the surface while providing a high-luster finish.
Handcrafted for a performance-oriented appearance, this carbon fiber deck lid weighs approximately 16.9 lbs. It is designed to mount using the original equipment (OE) hardware, which is not included.
This deck lid does not include a cutout for the factory backup camera. A camera cutout template is available separately to assist with modification if required. Anderson Composites also recommends adjusting the deck lid hinge springs to the lowest tension setting to help prevent excessive pressure on the composite panel.
Features
-
Brand: Anderson Composites
-
Product Type: Type-OE Carbon Fiber Deck Lid
-
Material: Carbon fiber
-
Manufacturing Process: Vacuum-infused construction
-
Carbon Fiber Weave: 3K, 2x2 twill
-
Surface Protection: Marine-grade gel coat with UV inhibitors
-
Finish: Polished, high-luster surface
-
Construction: Handcrafted
-
Approximate Weight: 16.9 lbs
-
Mounting: Uses original equipment (OE) hardware; hardware is not included
-
Backup Camera: No factory backup camera hole
Vehicle Compatibility
The product title specifies 2015–2022 Dodge Charger, while the supplied fitment notes and table list applications through 2023.
Listed applications include:
-
Dodge Charger SE: 2015–2017
-
Dodge Charger SXT: 2015–2023
-
Dodge Charger Pursuit: 2015–2023
-
Dodge Charger R/T: 2015–2023
-
Dodge Charger SRT Hellcat: 2015–2020
-
Dodge Charger R/T Scat Pack: 2015–2018
-
Dodge Charger SRT 392: 2015–2018
-
Dodge Charger Daytona 392: 2017–2018
-
Dodge Charger R/T 392: 2017–2018
-
Dodge Charger SXT Plus: 2018
-
Dodge Charger Daytona: 2018
-
Dodge Charger GT: 2018 and 2020–2023
-
Dodge Charger Scat Pack: 2020–2023
-
Dodge Charger SRT Hellcat Widebody: 2023
-
Dodge Charger SRT Hellcat Redeye Widebody: 2023
-
Dodge Charger SRT Hellcat Widebody Jailbreak: 2023
-
Dodge Charger SRT Hellcat Redeye Widebody Jailbreak: 2023
-
Dodge Charger Scat Pack Widebody: 2023
Important Fitment Note: Confirm the exact model year and trim before ordering, as the product title and supplied fitment information cover different year ranges.
Installation Notes
-
Original equipment mounting hardware is required but is not included.
-
The deck lid does not have a hole for the factory backup camera. A separate cutout template may be used if a camera opening is needed.
-
Anderson Composites does not recommend installing or reinstalling oversized aftermarket wings or spoilers on this deck lid. The additional aerodynamic downforce may damage the carbon fiber component.
-
Set the deck lid hinge springs to the lowest spring-tension setting to help prevent excessive pressure on the composite deck lid.
-
Removing the hinge spring may be necessary to help prevent long-term damage.
-
Professional installation is recommended to ensure proper alignment and reduce the risk of damage.
