Description
Unleash the performance potential of your vehicle with the aFe POWER Magnum FORCE Stage-2 Cold Air Intake System with Pro 5R Filter. Designed for maximum airflow and an aggressive intake sound, this Stage-2 system combines an open-element air filter design, high-flow intake tube, and large washable Pro 5R performance filter.
Dyno testing has demonstrated gains of up to 21 horsepower and 31 lb-ft of torque, while the system flows up to 14% more air than the factory intake. With a measured airflow of 285 CFM at 7" H₂O, the Magnum FORCE Stage-2 intake is engineered to provide a less restrictive path for incoming air.
Large Pro 5R Performance Air Filter
The system uses a large 360-degree radial-flow Pro 5R air filter featuring five layers of progressively finer, pre-oiled cotton gauze media. This high-flow filter design is engineered to maximize airflow while providing effective filtration and dust-holding capacity.
The inverted filter top increases the usable filtration surface area, helping extend service intervals. The Pro 5R filter is washable and reusable, making it suitable for repeated cleaning cycles and long-term performance use.
Open-Element Airbox Design
The open-element design places the large performance filter in full view while producing a more aggressive intake sound under load. The filter is surrounded by a massive XLPE cross-linked polyethylene housing designed to help minimize exposure to warm engine-bay air while maintaining high airflow.
The housing incorporates the vehicle's factory air inlet scoop, eliminating the need for additional inlet hardware.
Dyno-Tuned Intake Tube
A computer-designed and dyno-tuned intake tube provides a smooth, efficient path for incoming air. Constructed from heat-resistant XLPE material, the intake tube is designed to withstand engine-bay temperatures while maintaining durability and dimensional stability.
Fast, Direct Bolt-On Installation
The Magnum FORCE Stage-2 system uses factory mounting locations for a straightforward installation. The innovative filter-to-housing interface reduces the number of components compared with traditional cold air intake designs, helping simplify installation and maintenance.
No cutting or drilling is required, making this a direct bolt-on performance upgrade.
Key Features
- Magnum FORCE Stage-2 cold air intake system
- Dyno-proven gains of up to 21 HP and 31 lb-ft of torque
- Outflows the factory intake by up to 14%
- Measured airflow of 285 CFM at 7" H₂O
- Large washable and reusable Pro 5R performance air filter
- Five layers of progressively finer cotton gauze media
- Pre-oiled high-flow filter media
- 360-degree radial-flow filter design
- Open-element design for aggressive intake sound
- XLPE polymer filter housing
- Designed to minimize warm engine-air exposure
- Utilizes the factory air inlet scoop
- Dyno-tuned intake tube
- Heat-resistant and durable XLPE construction
- Innovative filter-to-housing interface
- Factory mounting locations
- No cutting or drilling required
- Direct bolt-on installation
- Suitable for street and track applications
Performance
Maximum Horsepower Gain: Up to 21 HP
Maximum Torque Gain: Up to 31 lb-ft
Airflow Gain: Up to 14% over factory intake
Measured Flow: 285 CFM @ 7" H₂O
Important Note
Vehicle-specific fitment information was not included in the supplied product information. Verify the applicable vehicle, model year, engine, and intake configuration before ordering.
Emissions Disclaimer
This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
