Description
Are you aiming to enhance your A90/91 Supra's performance for 1/4 mile or 1/2 mile racing? Need to run 17" wheels, or even 15" wheels with suspension modifications, and skinnies up front? Looking to shed over 70 lbs of unsprung weight while staying budget-friendly? The VTT “GC” Front Drag Kit is designed specifically for you. This kit not only optimizes your wheel/tire setup for improved ETs but also significantly reduces weight compared to the stock front brake system.
Key Features:
- Plug-and-Play Installation: Utilizes Genuine Wilwood parts, including DOT-approved brake lines, CNC 7075 rotor hats/brackets, and a CEL eliminator harness for the brake sensor.
- Significant Weight Reduction:
- OEM Steel Kit: 46 lbs per side (Total 92 lbs)
- VTT HD Kit Spec 37 Rotors: 16.1 lbs per side (Total 30.3 lbs), saving 61.7 lbs over stock
- VTT Scalloped Kit: 10.7 lbs per side (Total 21.4 lbs), saving 70.6 lbs over stock
- Caliper Options:
- 6-Piston Dynapro (Pad Style 6712)
- 4-Piston Dynapro (Pad Style 7812)
- Rotors:
- HD Version: Custom cast HD rotors, suitable for street and racing duties
- Race Version: Genuine Wilwood Ultra-Lite scalloped rotors, intended for drag racing only
Included in the Kit:
- HD Version:
- VTT Custom Cast HD Rotors
- Genuine VTT Calipers
- VTT Street or Race Brake Pads
- DOT Approved Brake Lines
- VTT CNC Rotor Hats
- VTT CNC Brackets
- Brake Sensor CEL Eliminator Harness
- Race Version:
- Genuine Wilwood Ultra-Lite Scalloped Rotors
- Genuine VTT Calipers
- VTT Street or Race Brake Pads
- DOT Approved Brake Lines
- VTT CNC Rotor Hats
- VTT CNC Brackets
- Brake Sensor CEL Eliminator Harness
Fitment Guide:
- 2020+ Toyota Supra (A90/A91)
- Some G-Series BMW models, including M340i
Disclaimer:
- HD Kits: Designed for street and drag racing use. Not suitable for heavy braking environments such as Auto-X or road racing.
- Scalloped Kits: Intended for one-pass cooldown drag racing only. They may crack if used too aggressively. Not for street driving.
- Proper Pad Bedding: Essential for full braking performance. Failure to bed the pads properly may result in reduced braking ability. If pads are glazed, rotors must be sanded down and rebed.
Product Details:
- Material: CNC machined from high-quality components including 6061-T6 aluminum and DOT-approved materials.
- Weight Savings:
- HD Rotors: 9 lbs
- Scalloped Rotors: 5.1 lbs
- VTT 4-Piston Caliper: 3.6 lbs
- VTT 6-Piston Caliper: 5.1 lbs
- Rotor Hat: 1 lb
- Pads (one side): 1 lb
