Description
Important Compatibility Note
- This gauge does NOT fit Facelift Scirocco models.
Key Features
1. Plug-and-Play Installation
- Simply connect to your vehicle's OBD2 port for a hassle-free setup.
- Prefer to keep your OBD2 port free? A hard-wire harness kit is available as an alternative.
2. Seamless OEM Integration
- Installs in your vehicle's air vent for a clean, factory-installed look while retaining air flow.
- Available with a silver-trimmed OEM vent option.
3. Wide Range of Readouts
Customize your experience with the following real-time data readouts:
- Boost Pressure (via OEM sensors or optional P3 analog boost sensor).
- Coolant Temperature.
- Air/Fuel Ratio (AFR or Lambda).
- Vehicle Speed (calibratable by 1% increments from -9% to +20%).
- Intake Air Temperature.
- Throttle Angle.
- Ignition Timing.
- Engine RPM.
- Exhaust Gas Temperature.
- Battery Voltage.
- Programmable Shift Light.
- Custom Sensors:
- Analog Input 1 (Brown Wire): Supports any 0-5 volt linear output sensor.
- Analog Input 2 (Blue Wire): Supports an additional 0-5 volt sensor.
4. Diagnostic and Calibration Tools
- Code Reading and Clearing: Easily read and clear diagnostic trouble codes (DTCs).
- User Control: Add or remove PIDs (parameters) to focus on what matters most.
- Speed Calibration: Fine-tune your speedometer for accuracy.
Optional Add-Ons
Enhance your P3 V3 Gauge setup with these extras:
P3 Analog Boost Sensor
- Directly plugs into the gauge harness without additional wiring.
Boost Tubing Kit
- Includes 5' of 5/32" O.D. flexible plastic tubing, vacuum "T," and three 5/32" I.D. vacuum hose sections, plus zip ties.
P3 ESVA (Ethanol Sensor Voltage Adaptor):
- Monitors ethanol content and fuel temperature using a compatible GM/Continental ethanol sensor (sensor not included).
Trim Removal Kit
- Protect your trim during installation with specialized tools designed to prevent scratches or damage.
OBD2 Splitter:
- Connect multiple devices to your OBD2 port (note: some devices may conflict when used simultaneously).
Why Choose the P3 V3 Gauge?
Unmatched User Experience
- Readable and Accessible: Bright, bold display allows quick data retrieval at a glance.
- Discreet Design: Maintains an OEM+ aesthetic by blending into your interior.
All-Weather Durability
- Withstands extreme temperatures, from -94°F to conditions where components physically melt, ensuring dependable performance.
Included in the Box
- P3 V3 Display Unit.
- OBD2 Connection Harness.
- Installation Guide.
Specifications
- Vehicle Compatibility: VW Eos / Scirocco (2007-2017).
- Power Source: OBD2 port or optional hard-wire harness.
- Installation Location: Air vent (OEM vent integration available).
The standard shipping rate applies to orders within the continental United States. If you intend to place an order outside of the continental US, please reach out to support@x-ph.com for assistance.
