Description
Fitment
- Vehicle Compatibility: Subaru BRZ and Toyota GR86 (2022+)
Key Features
1. Plug and Play Install
- The P3 V3 Gauge plugs directly into your OBD2 port for easy installation.
- Want to keep your OBD2 port open? A hard-wire harness kit is also available for those who prefer a more permanent setup.
2. OEM Integration
- The gauge installs directly into the vehicle’s air vent, providing a sleek, OEM-style fitment while maintaining airflow.
- Note: Right-hand drive (RHD) vent options are not available.
3. Versatility
- Boost Monitoring: Read boost levels from multiple OEM sensors through the OBD2 port or with the optional P3 analog boost sensor.
- Code Reading and Clearing: Easily read and clear diagnostic trouble codes (DTCs) on the fly.
4. Customizable Readouts
- The gauge can be configured to display the following metrics (all readouts can be in Imperial or Metric units):
- Boost (via OBD2 or P3 analog boost sensor)
- Engine Oil Temperature
- Coolant Temperature
- Air/Fuel Ratio (display in AFR or Lambda)
- Vehicle Speed (calibratable in 1% increments from -9% to +20%)
- Intake Air Temperature
- Throttle Angle
- Ignition Timing
- Engine RPM
- Exhaust Gas Temperature
- Battery Voltage
- Programmable Shift Light
- Acceleration Timers (0-60 mph, 0-100 mph, 60-130 mph)
- Braking Timers (60-0 mph, 100-0 mph)
- Analog Inputs (two 0-5 volt linear input sensors can be configured)
5. Enhanced Control
- DTC Management: View and clear diagnostic trouble codes as needed.
- Customizable Units: Change measurement units for individual data points (e.g., boost, temperature).
- Vehicle Speed Calibration: Fine-tune your vehicle's speed reading, with the ability to adjust in 1% increments.
Optional Add-Ons
P3 Analog Boost Sensor
- No wiring required, plugs directly into the gauge harness to monitor boost pressure.
Boost Tubing Kit
- Approx. 5' of 5/32" O.D. flexible plastic boost tubing with a vacuum "T" and 3 sections of 5/32" I.D. vacuum hose. Includes 3 zip ties.
P3 ESVA (Ethanol Sensor Voltage Adaptor)
- Allows the gauge to read ethanol content and fuel temperature directly from a Continental/GM flex-fuel sensor (ethanol sensor not included).
Trim Removal Kit
- Tool kit designed to help you safely remove your vent and interior trim without damaging or scratching your vehicle's interior.
OBD2 Splitter
- Attach multiple devices to your OBD2 port. Note that some devices may not function if another device is connected to the port.
Why Choose the P3 V3 Gauge for Your Subaru BRZ or Toyota GR86?
1. OEM Integration for Sleek Design
- The P3 V3 installs directly into your vehicle’s air vent, offering an OEM-like appearance while retaining airflow and functionality.
2. Comprehensive Performance Monitoring
- Track essential performance metrics such as boost, oil temperature, AFR, intake air temperature, and more for precise monitoring during daily drives or high-performance scenarios.
3. Easy-to-Read Display
- The bold, bright display allows you to quickly read essential data at a glance, without the hassle of bulky pillar pods or hard-to-read digital displays.
4. Durability in Extreme Conditions
- The P3 V3 is engineered to withstand harsh environments, from freezing temperatures as low as -94°F to scorching heat. It’s been tested to endure extreme conditions for optimal in-car performance.
5. Enhanced Control and Customization
- With features like the ability to clear DTCs, customize readout units, and calibrate vehicle speed, the P3 V3 Gauge gives you even more control over your vehicle’s data.
