Description
The P3 Analog Gauge offers precise, customizable performance monitoring for your VW New Beetle. With advanced analog readouts, this gauge is ideal for enthusiasts looking to keep track of key metrics. Note: This gauge is NOT plug-and-play and requires wiring for power, ground, and optional analog inputs, as well as a boost/vacuum hose to the engine.
Key Features
1. Analog Data Monitoring
Access up to four customizable analog readouts:
- Analog Boost/Vacuum: Dedicated plug for analog boost sensor (boost tap not included).
- Analog Input 1 (Brown Wire): Reads any 0-5V linear output sensor.
- Analog Input 2 (Blue Wire): Supports an additional 0-5V linear output sensor.
- Battery Voltage: Monitors through red (power) and black (ground) wires.
2. Optional Auto-Dim Feature
- Connect the green wire to a circuit powered only when the headlights are on.
- Enable this feature in the configuration menu to automatically dim the display at night.
3. Seamless Integration
- Installs into your OEM vent, maintaining air flow and a clean, factory-like appearance.
4. Compatibility with Multiple Sensors
- Monitors oil pressure, oil temp, coolant temp, air ride pressure, exhaust gas temperature (EGT), and more with compatible 0-5V sensors.
OEM Vent Option
For an effortless installation, we can pre-install the display into a genuine OEM vent designed for your vehicle.
Optional Add-Ons
OBD2 Power/Ground Tap Harness
- Connects power and ground directly through the OBD2 port without splicing wires.
P3 ESVA (Ethanol Sensor Voltage Adaptor)
- Displays ethanol content and fuel temperature from a compatible Continental/GM flex-fuel sensor (sensor not included).
LC-2 Wideband O2 Sensor Kit
- Adds a wideband oxygen sensor for precise air/fuel ratio (AFR) readings.
Boost Tubing Kit
- Includes 5’ of 5/32” O.D. tubing, vacuum "T," and clamps for easy installation.
What’s Included in the Base Kit
- Integrated display.
- Analog Box control unit.
- Main harness.
- Hard-wire harness.
- Analog boost sensor (boost tap not included).
- Approximately 5’ of 5/32” O.D. boost tubing with 5/32” I.D. hose at each end.
- 3 zip ties.
- 2 Scotchlok wire taps.
Fitment
- Compatible with VW New Beetle models from 1997 to 2010, including all trims.
- Ideal for drivers looking for advanced analog monitoring without relying on OBD2 functionality.
The standard shipping rate applies to orders within the continental United States. If you intend to place an order outside of the continental US, please reach out to support@x-ph.com for assistance.
