P3 Analog Gauge - Audi Q7 (2006-2016)

The P3 Analog Gauge is the perfect solution for enthusiasts who require precise analog readouts for critical vehicle parameters in their Audi Q7 Mk1 (2006-2016). Designed for those who prefer customization, this gauge requires a wired installation but delivers exceptional performance monitoring with unmatched versatility.

Fitment:

• Vehicle Compatibility: Audi Q7 Mk1 (2006-2016, 4L platform)

Key Features:

1. Wired Installation Required

• NOT Plug-and-Play: Boost/vacuum hose connection to the engine is mandatory, along with wiring for power, ground, and optional inputs.

2. Available Analog Readouts

The P3 Analog Gauge provides up to 4 customizable analog measurements:

1. Analog Boost: Monitored via the dedicated boost sensor plug (yellow/purple/black wires).
   Boost tap not included.
2. Analog Input 1: Read any 0-5V linear output sensor (e.g., oil pressure, coolant temp).
3. Analog Input 2: Additional sensor input for expanded monitoring.
4. Battery Voltage: Monitored through red (power) and black (ground) wires.

3. Optional Auto-Dim Feature

• Use the green wire to connect to a headlamp power circuit. Activate the auto-dim function via the configuration menu for seamless adjustment of brightness when headlights are on.

Optional Add-Ons:

1. OBD2 Power/Ground Tap Harness

• Simplify wiring by connecting to power and ground through the OBD2 port without splicing. (Does not add OBD2 functionality.)

2. P3 ESVA (Ethanol Sensor Voltage Adaptor)

• Read ethanol content and fuel temperature from any Continental/GM ethanol sensor (sensor not included).

3. LC-2 Wideband O2 Sensor Kit

• Add this kit to monitor your vehicle's Air/Fuel Ratio (AFR). Includes all components for installing a wideband sensor into the exhaust system.

4. Support for Additional Sensors

• Read a variety of 0-5V linear output sensors such as:
  • Oil Pressure
  • Oil Temperature
  • Coolant Temperature
  • Exhaust Gas Temperature (EGT)
  • Air Ride Pressure

OEM Vent Integration (Optional)

• Seamless OEM Look: The gauge can be pre-installed in an OEM vent specific to your Q7 for an elegant, integrated appearance.

What’s Included in the Base Kit:

• Integrated Display
• Analog Box Control Unit
• Main Harness
• Hard-Wire Harness
• Analog Boost Sensor (Boost tap not included)
• Approximately 5' of 5/32" O.D. Boost Tubing with pre-fitted 5/32" I.D. hose at both ends
• 3 Zip Ties
• 2 Scotchlok Wire Taps