Burger Tuning Q50/Q60 JB4 Performance Tuner 2.0T

The Burger Tuning Q50/Q60 JB4 Performance Tuner 2.0T is the ultimate plug and play solution for boosting the performance of your vehicle. This innovative device is designed to work with your factory DME tuning and attaches to two easy-to-access sensors in the engine bay to remap your boost, timing, and fueling for optimal performance and reduced turbo lag.

With the Stage1, you can manipulate the ECU boost control signals to modify boost levels without affecting the ECU manifold boost reference. This allows your ECU to properly map timing and fueling for the higher boost levels, resulting in smooth and powerful performance that runs as smoothly as stock, but with higher boost targets under heavy throttle. The Stage1 features a 64mhz processor that allows sensors to be sampled 800 times per second using dedicated 10-bit digital to analog converters, ensuring that you get the smoothest and most powerful performance possible.

The best part? The boost added is user adjustable with the optional BMS data cable, and the default boost gain is set to 3.0 psi over stock. The Stage1 can be used by itself or in conjunction with a flash tuning map for adding extra boost where desired. Installation takes under a minute, and it removes just as quickly without leaving a trace when needed. Fuel economy during normal driving is unchanged.

The power gains with the Red Sport model, which runs more boost from the factory, are in the 30-50hp range depending on fuel quality. In contrast, the Silver Sport model, which is heavily detuned from the factory, can gain up to 60hp-100hp depending on the fuel quality. The higher the octane, the higher you can raise the boost pressure over stock, and the larger the power gain. For Red Sport, we suggest a maximum of 3psi over stock on pump fuels and 4psi over stock on E85 mixtures or unleaded race gas. Meanwhile, Silver Sport can run up to 5psi over stock on good 93 octane fuel and up to 7psi over stock on E85 mixtures or unleaded race gas.

For those using the Stage1 in conjunction with an aftermarket flash map, you'll want to run 1-2psi over the flashed boost target depending on your fuel quality. So if you're looking for an easy and effective way to enhance the performance of your Q50/Q60 2.0T, the Burger Tuning JB4 Performance Tuner is the perfect solution. Upgrade your engine tuning, boost control, timing, fueling, and reduce turbo lag today and experience optimal performance like never before!

Join the discussion here:
http://www.n54tech.com/forums/showthread.php?t=46774