SPOOL FX-200 STAGE 3 UPGRADED HIGH PRESSURE PUMP [VR30DDTT]

Spool Performance FX-200 Stage 3 High-pressure fuel pump upgrade

What is the FX-200?

The FX-200 is an upgraded high-pressure fuel pump. The pump features a bigger bore size than stock that translates into about 400LPH of fuel flow. The pump is completely E85 compatible and fully plug and play with no cutting or splicing of any kind required. The added flow will let you run much higher ethanol concentrations and also allow fueling for bigger turbos.

Why do you need it

The stock HPFP on the VR30DDTT Motor is severely limited in capacity when trying to tune and raise the output of the motor. The FX-200 adds about 80% more flow to the equation, raising the fueling limits on the platform and helping you run bigger turbos and/or higher ethanol concentration blends.

Spool 10-micron filter unit

Our included 10-micron filter unit boasts the best filtration available on the VR30 market without any noticeable pressure drop in the low side fuel system. The filter unit helps keep the high-pressure pump and injectors safe by protecting them against debris and is highly recommended.

Spool Ethanol Content Monitor

The spool ECA kit for the VR30 features a digital readout of in-tank ethanol content and fuel temperature. It includes our SPOOL Ethanol content analyzer app on mobile and readouts are delivered via BLE 4.0 low energy technology. BLE4.0 allows you to use your regular Bluetooth devices on your mobile devices while being connected to the SPOOL ECA module. The ECA module also has a 0-5V filtered output for flex-fuel implementation on the VR30 platform. Fuel lines used in the kit are braided steel nylon core fuel lines that are 100% E85 compatible.

Low Pressure Fuel Pump Upgrade:

Proper low pressure fueling is extremely important for proper functioning and durability of the high pressure pumps and injectors in a DI system. Inadequate low pressure fueling can cause damage to the pump piston and bore as they are lubricated by controlled leakage of fuel. Resulting damage from low pressure starvation is detectable and would be cause for voided warranties. Please make sure you plan out your fuel system build with proper low pressure upgrades when necessary.

Spool Performance kits have an average lead time of 1-2 weeks. Some order may take up to 3 weeks to be shipped. Cancellations within 3 weeks will be subject to a 25% restocking fee, and a 5% merchant fee.

All spool performance sales are final; no return or exchange allowed. Please double-check compatibility before placing an order. If you have any questions, contact us before placing the order.

“WARRANTY: All Spool Performance products purchased from XPH are warrantied for life, through Spool. This warranty is only applicable to the original purchasing party. Should defects in material or workmanship exist during the applicable warranty period in any Spool Performance product, Spool Performance will elect at its discretion to either repair or replace the defective material. If you are experiencing an issue with your Spool Performance item, please contact support@x-ph.com to start your warranty claim.”

This product has a flat shipping fee, this fee is valid for continental US locations only. If you are placing an order outside of the continental US, please email shipping@x-ph.com for a shipping quote before you place the order. If you do not, the order will not be processed. Instead, you will be receiving an email from the shipping team to pay the additional shipping cost.