SPOOL FX-200 BMW N55 UPGRADED HIGH PRESSURE PUMP

What is the FX-200?

The FX-200 is an upgraded high-pressure fuel pump for the BMW N55 motor that replaces our existing FX180 offering. The pump features a bigger bore size than stock that translates into roughly double the flow when compared to stock. The pump is completely E85 compatible and fully plug and play with no cutting or splicing of any kind required. The added flow will let you run much higher ethanol concentrations and also allow fueling for bigger turbos.

Why do you need it?

The stock HPFP on N55 motor is severely limited in capacity when trying to tune and raise the output of the motor. The FX-200 adds double the flow to the equation, raising the fueling limits on the platform and helping you run bigger turbos and/or higher ethanol concentration blends.

Are tune changes required?

The upgraded pump does require calibration changes. It is important to apply these changes prior to starting the car with pump installed to avoid any possible damage and void of warranty.

Spool Performance can provide calibration details to your existing tuner and/or help you connect with established tuners who are experienced with these pumps. Custom tuning is required to get maximum output out of the upgraded pump setup for your specific vehicle setup and ambient conditions. Spool Performance is a hardware manufacturer and does not provide custom tunes, but can assist with questions your tuner may have.

Low Pressure Fuel Pump Upgrade:

Proper low pressure fueling is extremely important for proper functioning and durability of the high pressure pumps and injectors in a DI system. Inadequate low pressure fueling can cause damage to the pump piston and bore as they are lubricated by controlled leakage of fuel. Resulting damage from low pressure starvation is detectable and would be cause for voided warranties. Please make sure you plan out your fuel system build with proper low pressure upgrades when necessary.

 SpoolPerformance, Spool, FX-180, N55, Hpfp
 FX-180, N55, B58

Spool Performance kits have an average lead time of 1-2 weeks. Some order may take up to 3 weeks to be shipped. Cancellations within 3 weeks will be subject to a 25% restocking fee, and a 5% merchant fee.

All spool performance sales are final; no return or exchange allowed. Please double-check compatibility before placing an order. If you have any questions, contact us before placing the order.

“WARRANTY: All Spool Performance products purchased from XPH are warrantied for life, through Spool. This warranty is only applicable to the original purchasing party. Should defects in material or workmanship exist during the applicable warranty period in any Spool Performance product, Spool Performance will elect at its discretion to either repair or replace the defective material. If you are experiencing an issue with your Spool Performance item, please contact support@x-ph.com to start your warranty claim.”

This product has a flat shipping fee, this fee is valid for continental US locations only. If you are placing an order outside of the continental US, please email shipping@x-ph.com for a shipping quote before you place the order. If you do not, the order will not be processed. Instead, you will be receiving an email from the shipping team to pay the additional shipping cost.